overdue refactor: compile all watch modules separately

make.mk

@@ -71,6 +71,17 @@ SRCS += \
   $(TOP)/watch-library/main.c \
   $(TOP)/watch-library/startup_saml22.c \
   $(TOP)/watch-library/hw/driver_init.c \
+  $(TOP)/watch-library/watch/watch_rtc.c \
+  $(TOP)/watch-library/watch/watch_slcd.c \
+  $(TOP)/watch-library/watch/watch_extint.c \
+  $(TOP)/watch-library/watch/watch_led.c \
+  $(TOP)/watch-library/watch/watch_buzzer.c \
+  $(TOP)/watch-library/watch/watch_adc.c \
+  $(TOP)/watch-library/watch/watch_gpio.c \
+  $(TOP)/watch-library/watch/watch_i2c.c \
+  $(TOP)/watch-library/watch/watch_uart.c \
+  $(TOP)/watch-library/watch/watch_deepsleep.c \
+  $(TOP)/watch-library/watch/watch_private.c \
   $(TOP)/watch-library/watch/watch.c \
   $(TOP)/watch-library/hal/src/hal_atomic.c \
   $(TOP)/watch-library/hal/src/hal_delay.c \

watch-library/watch/watch.c

@@ -24,18 +24,6 @@
 
 #include "watch.h"
 
-#include "watch_rtc.c"
-#include "watch_slcd.c"
-#include "watch_extint.c"
-#include "watch_led.c"
-#include "watch_buzzer.c"
-#include "watch_adc.c"
-#include "watch_gpio.c"
-#include "watch_i2c.c"
-#include "watch_uart.c"
-#include "watch_deepsleep.c"
-#include "watch_private.c"
-
 bool battery_is_low = false;
 
 // receives interrupts from MCLK, OSC32KCTRL, OSCCTRL, PAC, PM, SUPC and TAL, whatever that is.

watch-library/watch/watch_adc.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_adc.h"
+
 void _watch_sync_adc() {
     while (ADC->SYNCBUSY.reg);
 }

watch-library/watch/watch_adc.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_ADC_H_INCLUDED
+#define _WATCH_ADC_H_INCLUDED
 ////< @file watch_adc.h
 
+#include "watch.h"
+
 /** @addtogroup adc Analog Input
   * @brief This section covers functions related to the SAM L22's analog-to-digital converter,
   *        as well as configuring and reading values from the five analog-capable pins on the
@@ -103,3 +107,4 @@ void watch_disable_analog_input(const uint8_t pin);
 void watch_disable_adc();
 
 /// @}
+#endif

watch-library/watch/watch_app.h

@@ -21,6 +21,8 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_APP_H_INCLUDED
+#define _WATCH_APP_H_INCLUDED
 ////< @file watch_app.h
 
 /** @addtogroup app Application Framework
@@ -103,3 +105,4 @@ void app_prepare_for_sleep();
 void app_wake_from_sleep();
 
 /// @}
+#endif

watch-library/watch/watch_buzzer.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_buzzer.h"
+
  inline void watch_enable_buzzer() {
     if (!hri_tcc_get_CTRLA_reg(TCC0, TCC_CTRLA_ENABLE)) {
         _watch_enable_tcc();

watch-library/watch/watch_buzzer.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_BUZZER_H_INCLUDED
+#define _WATCH_BUZZER_H_INCLUDED
 ////< @file watch_buzzer.h
 
+#include "watch.h"
+
 /** @addtogroup buzzer Buzzer
   * @brief This section covers functions related to the piezo buzzer embedded in the F-91W's back plate.
   */
@@ -157,3 +161,4 @@ void watch_buzzer_play_note(BuzzerNote note, uint16_t duration_ms);
 extern const uint16_t NotePeriods[108];
 
 /// @}
+#endif

watch-library/watch/watch_deepsleep.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_extint.h"
+
 // this warning only appears when you `make BOARD=OSO-SWAT-A1-02`. it's annoying,
 // but i'd rather have it warn us at build-time than fail silently at run-time.
 // besides, no one but me really has any of these boards anyway.

watch-library/watch/watch_deepsleep.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_DEEPSLEEP_H_INCLUDED
+#define _WATCH_DEEPSLEEP_H_INCLUDED
 ////< @file watch_deepsleep.h
 
+#include "watch.h"
+
 // These are declared in watch_rtc.c.
 extern ext_irq_cb_t btn_alarm_callback;
 extern ext_irq_cb_t a2_callback;
@@ -115,3 +119,4 @@ void watch_enter_shallow_sleep(char *message);
   */
 void watch_enter_deep_sleep();
 /// @}
+#endif

watch-library/watch/watch_extint.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_extint.h"
+
 void watch_enable_external_interrupts() {
     // Configure EIC to use GCLK3 (the 32.768 kHz crystal)
     hri_gclk_write_PCHCTRL_reg(GCLK, EIC_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK3_Val | (1 << GCLK_PCHCTRL_CHEN_Pos));

watch-library/watch/watch_extint.h

@@ -21,8 +21,11 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_EXTINT_H_INCLUDED
+#define _WATCH_EXTINT_H_INCLUDED
 ////< @file watch_extint.h
 
+#include "watch.h"
 #include "hal_ext_irq.h"
 
 /** @addtogroup buttons Buttons & External Interrupts
@@ -78,3 +81,4 @@ void watch_register_button_callback(const uint8_t pin, ext_irq_cb_t callback);
 __attribute__((deprecated("Use watch_enable_external_interrupts instead")))
 void watch_enable_buttons();
 /// @}
+#endif

watch-library/watch/watch_gpio.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_gpio.h"
+
  void watch_enable_digital_input(const uint8_t pin) {
     gpio_set_pin_direction(pin, GPIO_DIRECTION_IN);
     gpio_set_pin_function(pin, GPIO_PIN_FUNCTION_OFF);

watch-library/watch/watch_gpio.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_GPIO_H_INCLUDED
+#define _WATCH_GPIO_H_INCLUDED
 ////< @file watch_gpio.h
 
+#include "watch.h"
+
 /** @addtogroup gpio Digital Input and Output
   * @brief This section covers functions related to general-purpose input and output signals.
   */
@@ -69,3 +73,4 @@ void watch_disable_digital_output(const uint8_t pin);
   */
 void watch_set_pin_level(const uint8_t pin, const bool level);
 /// @}
+#endif

watch-library/watch/watch_i2c.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_i2c.h"
+
 struct io_descriptor *I2C_0_io;
 
 void watch_enable_i2c() {

watch-library/watch/watch_i2c.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_I2C_H_INCLUDED
+#define _WATCH_I2C_H_INCLUDED
 ////< @file watch_i2c.h
 
+#include "watch.h"
+
 /** @addtogroup i2c I2C Controller Driver
   * @brief This section covers functions related to the SAM L22's built-I2C driver, including
   *        configuring the I2C bus, putting values directly on the bus and reading data from
@@ -99,3 +103,4 @@ uint32_t watch_i2c_read24(int16_t addr, uint8_t reg);
   */
 uint32_t watch_i2c_read32(int16_t addr, uint8_t reg);
 /// @}
+#endif

watch-library/watch/watch_led.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_led.h"
+
 void watch_enable_leds() {
     if (!hri_tcc_get_CTRLA_reg(TCC0, TCC_CTRLA_ENABLE)) {
         _watch_enable_tcc();

watch-library/watch/watch_led.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_LED_H_INCLUDED
+#define _WATCH_LED_H_INCLUDED
 ////< @file watch_led.h
 
+#include "watch.h"
+
 /** @addtogroup led LED Control
   * @brief This section covers functions related to the bi-color red/green LED mounted behind the LCD.
   * @details The SAM L22 is an exceedingly power efficient chip, whereas the LED's are relatively power-
@@ -86,3 +90,4 @@ void watch_enable_led(bool unused);
 __attribute__((deprecated("Use watch_disable_leds instead")))
 void watch_disable_led(bool unused);
 /// @}
+#endif

watch-library/watch/watch_private.c

@@ -22,6 +22,7 @@
  * SOFTWARE.
  */
 
+#include "watch_private.h"
 #include "tusb.h"
 
 void _watch_init() {

watch-library/watch/watch_private.h

@@ -21,10 +21,17 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_PRIVATE_H_INCLUDED
+#define _WATCH_PRIVATE_H_INCLUDED
+
+#include "watch.h"
 
 /// Called by main.c while setting up the app. You should not call this from your app.
 void _watch_init();
 
+/// Initializes the real-time clock peripheral.
+void _watch_rtc_init();
+
 /// Called by buzzer and LED setup functions. You should not call this from your app.
 void _watch_enable_tcc();
 
@@ -33,3 +40,4 @@ void _watch_disable_tcc();
 
 /// Called by main.c if plugged in to USB. You should not call this from your app.
 void _watch_enable_usb();
+#endif

watch-library/watch/watch_rtc.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_rtc.h"
+
 ext_irq_cb_t tick_callback;
 ext_irq_cb_t alarm_callback;
 ext_irq_cb_t btn_alarm_callback;

watch-library/watch/watch_rtc.h

@@ -21,8 +21,11 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_RTC_H_INCLUDED
+#define _WATCH_RTC_H_INCLUDED
 ////< @file watch_rtc.h
 
+#include "watch.h"
 #include "hpl_calendar.h"
 
 /** @addtogroup rtc Real-Time Clock
@@ -122,3 +125,4 @@ __attribute__((deprecated("Use the watch_rtc_get_date_time function instead")))
 void watch_get_date_time(struct calendar_date_time *date_time);
 
 /// @}
+#endif

watch-library/watch/watch_slcd.c

@@ -22,6 +22,8 @@
  * SOFTWARE.
  */
 
+#include "watch_slcd.h"
+
  //////////////////////////////////////////////////////////////////////////////////////////
 // Segmented Display
 

watch-library/watch/watch_slcd.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_SLCD_H_INCLUDED
+#define _WATCH_SLCD_H_INCLUDED
 ////< @file watch_slcd.h
 
+#include "watch.h"
+
 /** @addtogroup slcd Segment LCD Display
   * @brief This section covers functions related to the Segment LCD display driver, which is responsible
   *        for displaying strings of characters and indicators on the main watch display.
@@ -100,3 +104,4 @@ void watch_clear_indicator(WatchIndicatorSegment indicator);
 void watch_clear_all_indicators();
 
 /// @}
+#endif

watch-library/watch/watch_uart.c

@@ -50,6 +50,7 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include "watch_uart.h"
 #include "peripheral_clk_config.h"
 
 void watch_enable_debug_uart(uint32_t baud) {

watch-library/watch/watch_uart.h

@@ -21,8 +21,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#ifndef _WATCH_UART_H_INCLUDED
+#define _WATCH_UART_H_INCLUDED
 ////< @file watch_uart.h
 
+#include "watch.h"
+
 /** @addtogroup debug Debug UART
   * @brief This section covers functions related to the debug UART, available on
   *        pin D1 of the 9-pin connector.
@@ -51,3 +55,4 @@ void watch_debug_putc(char c);
 __attribute__((deprecated("Use printf to log debug messages over USB.")))
 void watch_debug_puts(char *s);
 /// @}
+#endif