add tinyusb

tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h

@@ -0,0 +1,52 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define _PINNUM(port, pin)    ((port)*32 + (pin))
+
+// LED
+#define LED_PIN         _PINNUM(1, 15)
+#define LED_STATE_ON    1
+
+// Button
+#define BUTTON_PIN      _PINNUM(1, 02)
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_RX_PIN     24
+#define UART_TX_PIN     25
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk

@@ -0,0 +1,10 @@
+MCU_VARIANT = nrf52840
+CFLAGS += -DNRF52840_XXAA
+
+$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
+	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
+
+# flash using adafruit-nrfutil dfu
+flash: $(BUILD)/$(PROJECT).zip
+	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
+	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld

@@ -0,0 +1,38 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx)     : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000
+
+  /* SRAM required by S132 depend on
+   * - Attribute Table Size
+   * - Vendor UUID count
+   * - Max ATT MTU
+   * - Concurrent connection peripheral + central + secure links
+   * - Event Len, HVN queue, Write CMD queue
+   */ 
+  RAM (rwx) :  ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .svc_data :
+  {
+    PROVIDE(__start_svc_data = .);
+    KEEP(*(.svc_data))
+    PROVIDE(__stop_svc_data = .);
+  } > RAM
+  
+  .fs_data :
+  {
+    PROVIDE(__start_fs_data = .);
+    KEEP(*(.fs_data))
+    PROVIDE(__stop_fs_data = .);
+  } > RAM
+} INSERT AFTER .data;
+
+INCLUDE "nrf52_common.ld"