diff --git a/gossamer b/gossamer
index a82c20e7..16e66f04 160000
--- a/gossamer
+++ b/gossamer
@@ -1 +1 @@
-Subproject commit a82c20e78049a477236f795506c73f7c9d210394
+Subproject commit 16e66f04b31d49f1f5fc67aeff5d61e9bdbbe5ca
diff --git a/movement.c b/movement.c
index 6f366b90..15f74edd 100644
--- a/movement.c
+++ b/movement.c
@@ -719,7 +719,7 @@ void app_setup(void) {
             lis2dw_configure_int1(LIS2DW_CTRL4_INT1_6D);
             HAL_GPIO_A3_in();
             HAL_GPIO_A3_pmuxen(HAL_GPIO_PMUX_EIC);
-            eic_configure_pin(HAL_GPIO_A3_pin(), INTERRUPT_TRIGGER_RISING);
+            eic_configure_pin(HAL_GPIO_A3_pin(), INTERRUPT_TRIGGER_RISING, false);
             // but rather than hooking it up to an interrupt callback, we'll have it trigger an event.
             eic_enable_event(HAL_GPIO_A3_pin());
 
diff --git a/watch-library/hardware/watch/watch_extint.c b/watch-library/hardware/watch/watch_extint.c
index 9c07baab..d5b6ffc7 100644
--- a/watch-library/hardware/watch/watch_extint.c
+++ b/watch-library/hardware/watch/watch_extint.c
@@ -43,14 +43,16 @@ void watch_disable_external_interrupts(void) {
 
 void watch_register_interrupt_callback(const uint8_t pin, watch_cb_t callback, eic_interrupt_trigger_t trigger) {
     watch_enable_digital_input(pin);
+    bool filten = false;
 
     // check if this is a button pin
     if (pin == HAL_GPIO_BTN_LIGHT_pin() || pin == HAL_GPIO_BTN_MODE_pin() || pin == HAL_GPIO_BTN_ALARM_pin()) {
         // if so, enable the pull-down resistor
         watch_enable_pull_down(pin);
+        filten = true;
     }
 
-    int8_t channel = eic_configure_pin(pin, trigger);
+    int8_t channel = eic_configure_pin(pin, trigger, filten);
     if (channel >= 0 && channel < 16) {
         printf("Configured port %d pin %d on channel %d\n", pin >> 5, pin & 0x1F, channel);
         eic_enable_interrupt(pin);