Merge branch 'main' of github.com:joeycastillo/Sensor-Watch into main

movement/alt_fw/deep_space_now.h

@@ -32,15 +32,15 @@
 
 #define MOVEMENT_CUSTOM_BOOT_COMMANDS() { \
     /* Standard Time */\
-    /*\
     watch_store_backup_data(0x1e0c0c, 4);\
     watch_store_backup_data(0x010115, 5);\
     watch_store_backup_data(0x130105, 6);\
-    */\
     /* Daylight Saving Time */\
+    /*\
     watch_store_backup_data(0x1f0c0c, 4);\
     watch_store_backup_data(0x020115, 5);\
     watch_store_backup_data(0x110105, 6);\
+    */\
     watch_store_backup_data(0x0597b9, 2);\
 }
 

movement/alt_fw/the_stargazer.h

@@ -27,11 +27,8 @@
 
 #include "movement_faces.h"
 
-#define MOVEMENT_CUSTOM_BOOT_COMMANDS() { \
+#define MOVEMENT_DEFAULT_RED_COLOR 0xF
-    movement_state.settings.bit.led_green_color = 0x0;\
+#define MOVEMENT_DEFAULT_GREEN_COLOR 0x0
-    movement_state.settings.bit.led_red_color = 0xF;\
-    watch_store_backup_data(movement_state.settings.reg, 0);\
-}
 
 const watch_face_t watch_faces[] = {
     simple_clock_face,

movement/make/make_alternate_fw.sh

@@ -3,7 +3,7 @@
 fw_dir="firmware/download"
 sim_dir="firmware/simulate"
 colors=("green" "blue")
-variants=("standard" "alt_time" "deep_space_now" "focus" "the_athlete" "the_backpacker" "the_stargazer")
+variants=("standard" "backer" "alt_time" "deep_space_now" "focus" "the_athlete" "the_backpacker" "the_stargazer")
 
 if [ -d "$fw_dir" ] ; then
     rm -r "$fw_dir"
@@ -25,7 +25,7 @@ do
         make LED=$COLOR FIRMWARE=$VARIANT
         mv "build/watch.uf2" "$fw_dir/$variant-$color.uf2"
     done
-    make clean
+    rm -rf ./build-sim
     emmake make FIRMWARE=$VARIANT
     mkdir "$sim_dir/$variant/"
     mv "build-sim/watch.wasm" "$sim_dir/$variant/"

movement/movement.c

@@ -37,7 +37,9 @@
 #ifndef MOVEMENT_FIRMWARE
 #include "movement_config.h"
 #elif MOVEMENT_FIRMWARE == MOVEMENT_FIRMWARE_STANDARD
-#include "alt_fw/standard.h"
+#include "movement_config.h"
+#elif MOVEMENT_FIRMWARE == MOVEMENT_FIRMWARE_BACKER
+#include "alt_fw/backer.h"
 #elif MOVEMENT_FIRMWARE == MOVEMENT_FIRMWARE_ALT_TIME
 #include "alt_fw/alt_time.h"
 #elif MOVEMENT_FIRMWARE == MOVEMENT_FIRMWARE_FOCUS
@@ -57,6 +59,14 @@
 #define MOVEMENT_SECONDARY_FACE_INDEX 0
 #endif
 
+// Set default LED colors if not set
+#ifndef MOVEMENT_DEFAULT_RED_COLOR
+#define MOVEMENT_DEFAULT_RED_COLOR 0x0
+#endif
+#ifndef MOVEMENT_DEFAULT_GREEN_COLOR
+#define MOVEMENT_DEFAULT_GREEN_COLOR 0xF
+#endif
+
 #if __EMSCRIPTEN__
 #include <emscripten.h>
 #endif
@@ -284,7 +294,8 @@ uint8_t movement_claim_backup_register(void) {
 void app_init(void) {
     memset(&movement_state, 0, sizeof(movement_state));
 
-    movement_state.settings.bit.led_green_color = 0xF;
+    movement_state.settings.bit.led_red_color = MOVEMENT_DEFAULT_RED_COLOR;
+    movement_state.settings.bit.led_green_color = MOVEMENT_DEFAULT_GREEN_COLOR;
     movement_state.settings.bit.button_should_sound = true;
     movement_state.settings.bit.le_interval = 1;
     movement_state.settings.bit.led_duration = 1;

movement/movement_config.h

@@ -32,7 +32,7 @@ const watch_face_t watch_faces[] = {
     world_clock_face,
     sunrise_sunset_face,
     moon_phase_face,
-    thermistor_readout_face,
+    stopwatch_face,
     preferences_face,
     set_time_face,
 };

movement/watch_faces/complication/stopwatch_face.c

@@ -29,6 +29,12 @@
 #include "watch.h"
 #include "watch_utility.h"
 
+// distant future for background task: January 1, 2083
+// see stopwatch_face_activate for details
+static const watch_date_time distant_future = {
+    .unit = {0, 0, 0, 1, 1, 63}
+};
+
 void stopwatch_face_setup(movement_settings_t *settings, uint8_t watch_face_index, void ** context_ptr) {
     (void) settings;
     (void) watch_face_index;
@@ -49,6 +55,7 @@ static void _stopwatch_face_update_display(stopwatch_state_t *stopwatch_state, b
     if (stopwatch_state->seconds_counted >= 3456000) {
         // display maxes out just shy of 40 days, thanks to the limit on the day digits (0-39)
         stopwatch_state->running = false;
+        movement_cancel_background_task();
         watch_display_string("st39235959", 0);
         return;
     }
@@ -72,12 +79,21 @@ static void _stopwatch_face_update_display(stopwatch_state_t *stopwatch_state, b
 
 void stopwatch_face_activate(movement_settings_t *settings, void *context) {
     (void) settings;
-    (void) context;
     if (watch_tick_animation_is_running()) watch_stop_tick_animation();
+
+    stopwatch_state_t *stopwatch_state = (stopwatch_state_t *)context;
+    if (stopwatch_state->running) {
+        // because the low power update happens on the minute mark, and the wearer could start
+        // the stopwatch anytime, the low power update could fire up to 59 seconds later than
+        // we need it to, causing the stopwatch to display stale data.
+        // So let's schedule a background task that will never fire. This will keep the watch
+        // from entering low energy mode while the stopwatch is on screen. This background task
+        // will remain scheduled until the stopwatch stops OR this watch face resigns.
+        movement_schedule_background_task(distant_future);
+    }
 }
 
 bool stopwatch_face_loop(movement_event_t event, movement_settings_t *settings, void *context) {
-    (void) settings;
     stopwatch_state_t *stopwatch_state = (stopwatch_state_t *)context;
 
     switch (event.event_type) {
@@ -103,6 +119,9 @@ bool stopwatch_face_loop(movement_event_t event, movement_settings_t *settings,
             }
             break;
         case EVENT_ALARM_BUTTON_DOWN:
+            if (settings->bit.button_should_sound) {
+                watch_buzzer_play_note(BUZZER_NOTE_C8, 50);
+            }
             stopwatch_state->running = !stopwatch_state->running;
             if (stopwatch_state->running) {
                 // we're running now, so we need to set the start_time.
@@ -118,15 +137,28 @@ bool stopwatch_face_loop(movement_event_t event, movement_settings_t *settings,
                     // and resume from the "virtual" start time that's that many seconds ago.
                     stopwatch_state->start_time = watch_utility_date_time_from_unix_time(timestamp, 0);
                 }
+                // schedule our keepalive task when running...
+                movement_schedule_background_task(distant_future);
+            } else {
+                // and cancel it when stopped.
+                movement_cancel_background_task();
             }
             break;
         case EVENT_TIMEOUT:
             // explicitly ignore the timeout event so we stay on screen
             break;
         case EVENT_LOW_ENERGY_UPDATE:
-            if (!watch_tick_animation_is_running()) watch_start_tick_animation(500);
+            if (!watch_tick_animation_is_running()) watch_start_tick_animation(1000);
-            _stopwatch_face_update_display(stopwatch_state, false);
+            if (!stopwatch_state->running) {
-            watch_set_indicator(WATCH_INDICATOR_BELL);
+                // since the tick animation is running, displaying the stopped time could be misleading,
+                // as it could imply that the stopwatch is running. instead, show a blank display to
+                // indicate that we are in sleep mode.
+                watch_display_string("st  ----  ", 0);
+            } else {
+                // this OTOH shouldn't happen anymore; if we're running, we shouldn't enter low energy mode
+                _stopwatch_face_update_display(stopwatch_state, false);
+                watch_set_indicator(WATCH_INDICATOR_BELL);
+            }
             break;
         default:
             break;
@@ -138,4 +170,8 @@ bool stopwatch_face_loop(movement_event_t event, movement_settings_t *settings,
 void stopwatch_face_resign(movement_settings_t *settings, void *context) {
     (void) settings;
     (void) context;
+
+    // regardless of whether we're running or stopped, cancel the task
+    // that was keeping us awake while on screen.
+    movement_cancel_background_task();
 }

movement/watch_faces/complication/sunrise_sunset_face.c

@@ -96,6 +96,11 @@ static void _sunrise_sunset_face_update(movement_settings_t *settings, sunrise_s
         if (seconds < 30) scratch_time.unit.minute = floor(minutes);
         else scratch_time.unit.minute = ceil(minutes);
 
+        if (scratch_time.unit.minute == 60) {
+            scratch_time.unit.minute = 0;
+            scratch_time.unit.hour = (scratch_time.unit.hour + 1) % 24;
+        }
+
         if (date_time.reg < scratch_time.reg) _sunrise_sunset_set_expiration(state, scratch_time);
 
         if (date_time.reg < scratch_time.reg || show_next_match) {
@@ -118,6 +123,11 @@ static void _sunrise_sunset_face_update(movement_settings_t *settings, sunrise_s
         if (seconds < 30) scratch_time.unit.minute = floor(minutes);
         else scratch_time.unit.minute = ceil(minutes);
 
+        if (scratch_time.unit.minute == 60) {
+            scratch_time.unit.minute = 0;
+            scratch_time.unit.hour = (scratch_time.unit.hour + 1) % 24;
+        }
+
         if (date_time.reg < scratch_time.reg) _sunrise_sunset_set_expiration(state, scratch_time);
 
         if (date_time.reg < scratch_time.reg || show_next_match) {
@@ -371,8 +381,11 @@ bool sunrise_sunset_face_loop(movement_event_t event, movement_settings_t *setti
             }
             break;
         case EVENT_TIMEOUT:
-            if (state->page || state->rise_index) {
+            if (watch_get_backup_data(1) == 0) {
-                // on timeout, exit settings mode and return to the next sunrise or sunset
+                // if no location set, return home
+                movement_move_to_face(0);
+            } else if (state->page || state->rise_index) {
+                // otherwise on timeout, exit settings mode and return to the next sunrise or sunset
                 state->page = 0;
                 state->rise_index = 0;
                 movement_request_tick_frequency(1);

movement/watch_faces/settings/set_time_face.c

@@ -66,8 +66,8 @@ bool set_time_face_loop(movement_event_t event, movement_settings_t *settings, v
                     date_time.unit.second = 0;
                     break;
                 case 3: // year
-                    // only allow 2021-2030. fix this sometime next decade
+                    // only allow 2021-2050. fix this if we make it that far.
-                    date_time.unit.year = ((date_time.unit.year % 10) + 1);
+                    date_time.unit.year = ((date_time.unit.year % 30) + 1);
                     break;
                 case 4: // month
                     date_time.unit.month = (date_time.unit.month % 12) + 1;