261 lines
7.9 KiB
C
261 lines
7.9 KiB
C
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <peripheral_clk_config.h>
|
|
#include "watch.h"
|
|
#include "watch_utility.h"
|
|
#include "spiflash.h"
|
|
|
|
#define ACCELEROMETER_TRAINING_RECORD_DELETED ((uint64_t)(0b00))
|
|
#define ACCELEROMETER_TRAINING_RECORD_DATA ((uint64_t)(0b01))
|
|
#define ACCELEROMETER_TRAINING_RECORD_HEADER ((uint64_t)(0b10))
|
|
#define ACCELEROMETER_TRAINING_RECORD_INVALID ((uint64_t)(0b11))
|
|
|
|
typedef union {
|
|
struct {
|
|
int16_t temperature : 16;
|
|
int8_t char1 : 8;
|
|
int8_t char2 : 8;
|
|
int32_t timestamp : 32;
|
|
} header;
|
|
struct {
|
|
int16_t x_accel : 16;
|
|
int16_t y_accel : 16;
|
|
int16_t z_accel : 16;
|
|
int32_t counter : 16;
|
|
} data;
|
|
uint64_t value;
|
|
} acceleromter_training_record_t;
|
|
|
|
static void cb_alarm_pressed(void) {
|
|
printf("Alarm button was pressed!\n");
|
|
}
|
|
|
|
static bool wait_for_flash_ready(void) {
|
|
watch_set_pin_level(A3, false);
|
|
bool ok = true;
|
|
uint8_t read_status_response[1] = {0x00};
|
|
do {
|
|
ok = spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1);
|
|
} while ((read_status_response[0] & 0x3) != 0);
|
|
delay_ms(1); // why do i need this?
|
|
watch_set_pin_level(A3, true);
|
|
return ok;
|
|
}
|
|
|
|
static void print_records_at_page(uint16_t page) {
|
|
if (page < 650) return;
|
|
acceleromter_training_record_t records[32];
|
|
static uint32_t timestamp = 0;
|
|
static uint16_t temperature = 0;
|
|
wait_for_flash_ready();
|
|
spi_flash_read_data(page * 256, (void *)records, 256);
|
|
for(int i = 0; i < 32; i++) {
|
|
switch (records[i].header.temperature >> 14) {
|
|
case ACCELEROMETER_TRAINING_RECORD_DELETED:
|
|
break;
|
|
case ACCELEROMETER_TRAINING_RECORD_DATA:
|
|
printf("%ld,%d,%d,%d,%d\n", timestamp + records[i].data.counter, records[i].data.x_accel, records[i].data.y_accel, records[i].data.z_accel, temperature);
|
|
break;
|
|
case ACCELEROMETER_TRAINING_RECORD_HEADER:
|
|
printf("=== BEGIN %c%c EVENT AT %d ===\n", records[i].header.char1, records[i].header.char2, records[i].header.timestamp);
|
|
printf("timestamp,x_raw,y_raw,z_raw,temperature\n");
|
|
timestamp = records[i].header.timestamp;
|
|
temperature = records[i].header.temperature & 0x3FFF;
|
|
break;
|
|
case ACCELEROMETER_TRAINING_RECORD_INVALID:
|
|
printf(",,,,\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void print_records() {
|
|
uint8_t buf[256];
|
|
for(int16_t i = 0; i < 4; i++) {
|
|
wait_for_flash_ready();
|
|
spi_flash_read_data(i * 256, buf, 256);
|
|
for(int16_t j = 0; j < 256; j++) {
|
|
uint8_t pages_written = buf[j];
|
|
uint8_t start = 0;
|
|
if (i == 0 && j == 0) {
|
|
pages_written <<= 4;
|
|
start = 4;
|
|
}
|
|
for(int k = start; k < 7; k++) {
|
|
if ((pages_written & 0x80) == 0) {
|
|
print_records_at_page(i * 2048 + j * 8 + k);
|
|
}
|
|
pages_written <<= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
void app_init(void) {
|
|
delay_ms(5000);
|
|
spi_flash_init();
|
|
watch_register_extwake_callback(BTN_ALARM, cb_alarm_pressed, true);
|
|
|
|
bool erase = false;
|
|
if (erase) {
|
|
printf("Erasing...\n");
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_ENABLE_WRITE);
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_CHIP_ERASE);
|
|
delay_ms(10000);
|
|
}
|
|
|
|
uint8_t buf[256] = {0xFF};
|
|
|
|
wait_for_flash_ready();
|
|
spi_flash_read_data(0, buf, 256);
|
|
printf("byte 0 was %02x\n", buf[0]);
|
|
if (buf[0] & 0xF0) {
|
|
buf[0] = 0x0F;
|
|
printf("setting it to 0x0F\n");
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_ENABLE_WRITE);
|
|
wait_for_flash_ready();
|
|
spi_flash_write_data(0, buf, 256);
|
|
}
|
|
|
|
print_records();
|
|
}
|
|
|
|
void app_wake_from_backup(void) {
|
|
}
|
|
|
|
void app_setup(void) {
|
|
}
|
|
|
|
void app_prepare_for_standby(void) {
|
|
}
|
|
|
|
void app_wake_from_standby(void) {
|
|
}
|
|
|
|
static int16_t get_next_available_page(void) {
|
|
uint8_t buf[256] = {0};
|
|
|
|
uint16_t page = 0;
|
|
for(int16_t i = 0; i < 4; i++) {
|
|
wait_for_flash_ready();
|
|
spi_flash_read_data(i * 256, buf, 256);
|
|
for(int16_t j = 0; j < 256; j++) {
|
|
if(buf[j] == 0) {
|
|
page += 8;
|
|
} else {
|
|
page += __builtin_clz(((uint32_t)buf[j]) << 24);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (page >= 8192) return -1;
|
|
|
|
return page;
|
|
}
|
|
|
|
static void write_buffer_to_page(uint8_t *buf, uint16_t page) {
|
|
uint32_t address = 256 * page;
|
|
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_ENABLE_WRITE);
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_write_data(address, buf, 256);
|
|
wait_for_flash_ready();
|
|
|
|
uint8_t buf2[256];
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_read_data(address, buf2, 256);
|
|
wait_for_flash_ready();
|
|
|
|
uint8_t used_pages[256] = {0xFF};
|
|
uint16_t address_to_mark_used = page / 8;
|
|
uint8_t header_page = address_to_mark_used / 256;
|
|
uint8_t used_byte = 0x7F >> (page % 8);
|
|
uint8_t offset_in_buf = address_to_mark_used % 256;
|
|
|
|
printf("\tWe wrote 256 bytes to address %ld, which was page %d.\n", address, page);
|
|
|
|
for(int i = 0; i < 256; i++) {
|
|
if (buf[i] != buf2[i]) {
|
|
printf("\tData mismatch detected at offset %d: %d != %d.\n", i, buf[i], buf2[i]);
|
|
}
|
|
}
|
|
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_read_data(header_page * 256, used_pages, 256);
|
|
used_pages[offset_in_buf] = used_byte;
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_ENABLE_WRITE);
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_write_data(header_page * 256, used_pages, 256);
|
|
wait_for_flash_ready();
|
|
}
|
|
|
|
bool app_loop(void) {
|
|
// delay_ms(5000);
|
|
|
|
return;
|
|
|
|
// simulate logging 15 seconds of data
|
|
watch_date_time date_time = watch_rtc_get_date_time();
|
|
acceleromter_training_record_t record;
|
|
|
|
record.header.temperature = 0xC30;
|
|
record.header.temperature |= (ACCELEROMETER_TRAINING_RECORD_HEADER << 14);
|
|
record.header.char1 = 'W';
|
|
record.header.char2 = 'A';
|
|
record.header.timestamp = watch_utility_date_time_to_unix_time(date_time, 0);;
|
|
|
|
acceleromter_training_record_t records[32];
|
|
memset(records, 0xFF, sizeof(records));
|
|
records[0] = record;
|
|
uint16_t pos = 1;
|
|
uint32_t counter = 0;
|
|
|
|
printf("logging 15*25 data points for timestamp %ld\n", record.header.timestamp);
|
|
for(uint8_t i = 0; i < 15; i++) {
|
|
for(uint8_t j = 0; j < 25; j++) {
|
|
record.data.x_accel = arc4random() & 0x3FFF;
|
|
record.data.x_accel |= ACCELEROMETER_TRAINING_RECORD_DATA << 14;
|
|
record.data.y_accel = arc4random() & 0x3FFF;
|
|
record.data.z_accel = arc4random() & 0x3FFF;
|
|
record.data.counter = i;
|
|
records[pos++] = record;
|
|
if (pos >= 32) {
|
|
printf("pos overflowed at counter %ld\n", counter);
|
|
int16_t next_available_page = get_next_available_page();
|
|
if (next_available_page > 0) {
|
|
write_buffer_to_page((uint8_t *)records, next_available_page);
|
|
wait_for_flash_ready();
|
|
}
|
|
pos = 0;
|
|
memset(records, 0xFF, sizeof(records));
|
|
}
|
|
}
|
|
}
|
|
if (records[0].header.temperature >> 14 != ACCELEROMETER_TRAINING_RECORD_INVALID) {
|
|
int16_t next_available_page = get_next_available_page();
|
|
if (next_available_page > 0) {
|
|
printf("Partial write\n");
|
|
write_buffer_to_page((uint8_t *)records, next_available_page);
|
|
wait_for_flash_ready();
|
|
}
|
|
}
|
|
|
|
delay_ms(60000);
|
|
|
|
return false;
|
|
}
|