b8de35658f
* Put something on screen * Use the 32bit watch_date_time repr to pass from JS * Implement periodic callbacks * Clear display on enabling * Hook up watch_set_led_color() to SVG (green-only) * Make debug output full-width * Remove default Emscripten canvas * Implement sleep and button clicks * Fix time zone conversion bug in beats-time app * Clean up warnings * Fix pin levels * Set time zone to browser value (if available) * Add basic backup data saving * Silence format specifier warnings in both targets * Remove unnecessary, copied files * Use RTC pointer to clear callbacks (if available) * Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES * Change each face to const preprocessor definition * Remove Intl.DateTimeFormat usage * Update shell.html title, header * Add touch start/end event handlers on SVG buttons * Update shell.html * Update folder structure (shared, simulator, hardware under watch-library) * Tease out shared components from watch_slcd * Clean up simulator watch_slcd.c inline JS calls * Fix missing newlines at end of file * Add simulator warnings (except format, unused-paremter) * Implement remaining watch_rtc functions * Fix button bug on mouse down then drag out * Implement remaining watch_slcd functions * Link keyboard events to buttons (for keys A, L, M) * Rewrite event handling (mouse, touch, keyboard) in C * Set explicit text UTF-8 charset in shell.html * Address PR comments * Remove unused directories from include paths
245 lines
8.6 KiB
C
245 lines
8.6 KiB
C
/**
|
|
* \file
|
|
*
|
|
* \brief Sync I2C Hardware Abstraction Layer(HAL) declaration.
|
|
*
|
|
* Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* Subject to your compliance with these terms, you may use Microchip
|
|
* software and any derivatives exclusively with Microchip products.
|
|
* It is your responsibility to comply with third party license terms applicable
|
|
* to your use of third party software (including open source software) that
|
|
* may accompany Microchip software.
|
|
*
|
|
* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
|
|
* WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
|
|
* INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
|
|
* LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
|
|
* LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
|
|
* SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
|
|
* POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
|
|
* ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
|
|
* RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
|
|
* THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
|
|
#ifndef _HAL_I2C_M_SYNC_H_INCLUDED
|
|
#define _HAL_I2C_M_SYNC_H_INCLUDED
|
|
|
|
#include <hpl_i2c_m_sync.h>
|
|
#include <hal_io.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* \addtogroup doc_driver_hal_i2c_controller_sync
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
#define I2C_M_MAX_RETRY 1
|
|
|
|
/**
|
|
* \brief I2C descriptor structure, embed i2c_device & i2c_interface
|
|
*/
|
|
struct i2c_m_sync_desc {
|
|
struct _i2c_m_sync_device device;
|
|
struct io_descriptor io;
|
|
uint16_t periph_addr;
|
|
};
|
|
|
|
/**
|
|
* \brief Initialize synchronous I2C interface
|
|
*
|
|
* This function initializes the given I/O descriptor to be used as a
|
|
* synchronous I2C interface descriptor.
|
|
* It checks if the given hardware is not initialized and if the given hardware
|
|
* is permitted to be initialized.
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] hw The pointer to hardware instance
|
|
*
|
|
* \return Initialization status.
|
|
* \retval -1 The passed parameters were invalid or the interface is already initialized
|
|
* \retval 0 The initialization is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_init(struct i2c_m_sync_desc *i2c, void *hw);
|
|
|
|
/**
|
|
* \brief Deinitialize I2C interface
|
|
*
|
|
* This function deinitializes the given I/O descriptor.
|
|
* It checks if the given hardware is initialized and if the given hardware is permitted to be deinitialized.
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
*
|
|
* \return Uninitialization status.
|
|
* \retval -1 The passed parameters were invalid or the interface is already deinitialized
|
|
* \retval 0 The de-initialization is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_deinit(struct i2c_m_sync_desc *i2c);
|
|
|
|
/**
|
|
* \brief Set the peripheral device address
|
|
*
|
|
* This function sets the next transfer target peripheral I2C device address.
|
|
* It takes no effect to any already started access.
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] addr The peripheral address to access
|
|
* \param[in] addr_len The peripheral address length, can be I2C_M_TEN or I2C_M_SEVEN
|
|
*
|
|
* \return Masked peripheral address. The mask is a maximum 10-bit address, and 10th
|
|
* bit is set if a 10-bit address is used
|
|
*/
|
|
int32_t i2c_m_sync_set_periphaddr(struct i2c_m_sync_desc *i2c, int16_t addr, int32_t addr_len);
|
|
|
|
/**
|
|
* \brief Set baudrate
|
|
*
|
|
* This function sets the I2C device to the specified baudrate.
|
|
* It only takes effect when the hardware is disabled.
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] clkrate Unused parameter. Should always be 0
|
|
* \param[in] baudrate The baudrate value set to controller
|
|
*
|
|
* \return Whether successfully set the baudrate
|
|
* \retval -1 The passed parameters were invalid or the device is already enabled
|
|
* \retval 0 The baudrate set is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_set_baudrate(struct i2c_m_sync_desc *i2c, uint32_t clkrate, uint32_t baudrate);
|
|
|
|
/**
|
|
* \brief Sync version of enable hardware
|
|
*
|
|
* This function enables the I2C device, and then waits for this enabling operation to be done
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
*
|
|
* \return Whether successfully enable the device
|
|
* \retval -1 The passed parameters were invalid or the device enable failed
|
|
* \retval 0 The hardware enabling is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_enable(struct i2c_m_sync_desc *i2c);
|
|
|
|
/**
|
|
* \brief Sync version of disable hardware
|
|
*
|
|
* This function disables the I2C device and then waits for this disabling operation to be done
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
*
|
|
* \return Whether successfully disable the device
|
|
* \retval -1 The passed parameters were invalid or the device disable failed
|
|
* \retval 0 The hardware disabling is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_disable(struct i2c_m_sync_desc *i2c);
|
|
|
|
/**
|
|
* \brief Sync version of write command to I2C peripheral
|
|
*
|
|
* This function will write the value to a specified register in the I2C peripheral device and
|
|
* then wait for this operation to be done.
|
|
*
|
|
* The sequence of this routine is
|
|
* sta->address(write)->ack->reg address->ack->resta->address(write)->ack->reg value->nack->stt
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] reg The internal address/register of the I2C peripheral device
|
|
* \param[in] buffer The buffer holding data to write to the I2C peripheral device
|
|
* \param[in] length The length (in bytes) to write to the I2C peripheral device
|
|
*
|
|
* \return Whether successfully write to the device
|
|
* \retval <0 The passed parameters were invalid or write fail
|
|
* \retval 0 Writing to register is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_cmd_write(struct i2c_m_sync_desc *i2c, uint8_t reg, uint8_t *buffer, uint8_t length);
|
|
|
|
/**
|
|
* \brief Sync version of read register value from I2C peripheral
|
|
*
|
|
* This function will read a byte value from a specified register in the I2C peripheral device and
|
|
* then wait for this operation to be done.
|
|
*
|
|
* The sequence of this routine is
|
|
* sta->address(write)->ack->reg address->ack->resta->address(read)->ack->reg value->nack->stt
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] reg The internal address/register of the I2C peripheral device
|
|
* \param[in] buffer The buffer to hold the read data from the I2C peripheral device
|
|
* \param[in] length The length (in bytes) to read from the I2C peripheral device
|
|
*
|
|
* \return Whether successfully read from the device
|
|
* \retval <0 The passed parameters were invalid or read fail
|
|
* \retval 0 Reading from register is completed successfully
|
|
*/
|
|
int32_t i2c_m_sync_cmd_read(struct i2c_m_sync_desc *i2c, uint8_t reg, uint8_t *buffer, uint8_t length);
|
|
|
|
/**
|
|
* \brief Sync version of transfer message to/from the I2C peripheral
|
|
*
|
|
* This function will transfer a message between the I2C peripheral and the controller.
|
|
* This function will wait for the operation to be done.
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] msg An i2c_m_msg struct
|
|
*
|
|
* \return The status of the operation
|
|
* \retval 0 Operation completed successfully
|
|
* \retval <0 Operation failed
|
|
*/
|
|
int32_t i2c_m_sync_transfer(struct i2c_m_sync_desc *const i2c, struct _i2c_m_msg *msg);
|
|
|
|
/**
|
|
* \brief Sync version of send stop condition on the i2c bus
|
|
*
|
|
* This function will create a stop condition on the i2c bus to release the bus
|
|
*
|
|
* \param[in] i2c An I2C descriptor, which is used to communicate through I2C
|
|
*
|
|
* \return The status of the operation
|
|
* \retval 0 Operation completed successfully
|
|
* \retval <0 Operation failed
|
|
*/
|
|
int32_t i2c_m_sync_send_stop(struct i2c_m_sync_desc *const i2c);
|
|
|
|
/**
|
|
* \brief Return I/O descriptor for this I2C instance
|
|
*
|
|
* This function will return a I/O instance for this I2C driver instance
|
|
*
|
|
* \param[in] i2c_m_sync_desc An I2C descriptor, which is used to communicate through I2C
|
|
* \param[in] io_descriptor A pointer to an I/O descriptor pointer type
|
|
*
|
|
* \return Error code
|
|
* \retval 0 No error detected
|
|
* \retval <0 Error code
|
|
*/
|
|
int32_t i2c_m_sync_get_io_descriptor(struct i2c_m_sync_desc *const i2c, struct io_descriptor **io);
|
|
|
|
/**
|
|
* \brief Retrieve the current driver version
|
|
*
|
|
* \return Current driver version.
|
|
*/
|
|
uint32_t i2c_m_sync_get_version(void);
|
|
|
|
/**@}*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|