66 lines
1.4 KiB
C
66 lines
1.4 KiB
C
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <peripheral_clk_config.h>
|
|
#include "watch.h"
|
|
#include "spiflash.h"
|
|
|
|
// this is a very basic app to confirm that SPI is working, tested with board OSO-MISC-21-017 and a GD25Q16C Flash chip.
|
|
|
|
static bool wait_for_flash_ready(void) {
|
|
watch_set_pin_level(A3, false);
|
|
bool ok = true;
|
|
uint8_t read_status_response[1] = {0x00};
|
|
do {
|
|
ok = spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1);
|
|
} while (ok && (read_status_response[0] & 0x3) != 0);
|
|
watch_set_pin_level(A3, true);
|
|
return ok;
|
|
}
|
|
|
|
void app_init(void) {
|
|
spi_flash_init();
|
|
delay_ms(5000);
|
|
|
|
uint8_t buf[256] = {0};
|
|
for(int i = 1; i < 16; i++) {
|
|
wait_for_flash_ready();
|
|
watch_set_pin_level(A3, false);
|
|
spi_flash_command(CMD_ENABLE_WRITE);
|
|
watch_set_pin_level(A3, true);
|
|
wait_for_flash_ready();
|
|
spi_flash_write_data(i * 256, buf, 256);
|
|
}
|
|
}
|
|
|
|
void app_wake_from_backup(void) {
|
|
}
|
|
|
|
void app_setup(void) {
|
|
}
|
|
|
|
void app_prepare_for_standby(void) {
|
|
}
|
|
|
|
void app_wake_from_standby(void) {
|
|
}
|
|
|
|
|
|
bool app_loop(void) {
|
|
uint8_t buf[4100] = {0};
|
|
printf("loop\n");
|
|
|
|
wait_for_flash_ready();
|
|
spi_flash_read_data(0, buf, 4100);
|
|
for(int i = 0; i < 4100; i++) {
|
|
if (buf[i] > 0) {
|
|
// should break at "byte 4096 is 255"
|
|
printf(" byte %d is %d!\n", i, buf[i]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
delay_ms(10000);
|
|
|
|
return false;
|
|
}
|