Initial commit

2025-12-30 13:48:35 +00:00
commit 0f7b02c8a6
67 changed files with 20228 additions and 0 deletions
--- a/CH5xx_ble_firmware_library/StdPeriphDriver/CH58x_usb2dev.c
+++ b/CH5xx_ble_firmware_library/StdPeriphDriver/CH58x_usb2dev.c
@@ -0,0 +1,113 @@
+/********************************** (C) COPYRIGHT *******************************
+ * File Name          : CH58x_usb2dev.c
+ * Author             : WCH
+ * Version            : V1.2
+ * Date               : 2021/11/17
+ * Description
+ *********************************************************************************
+ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
+ * Attention: This software (modified or not) and binary are used for 
+ * microcontroller manufactured by Nanjing Qinheng Microelectronics.
+ *******************************************************************************/
+
+#include "CH58x_common.h"
+
+uint8_t *pU2EP0_RAM_Addr;
+uint8_t *pU2EP1_RAM_Addr;
+uint8_t *pU2EP2_RAM_Addr;
+uint8_t *pU2EP3_RAM_Addr;
+
+/*********************************************************************
+ * @fn      USB2_DeviceInit
+ *
+ * @brief   USB2设备功能初始化，4个端点，8个通道。
+ *
+ * @param   none
+ *
+ * @return  none
+ */
+void USB2_DeviceInit(void)
+{
+    R8_USB2_CTRL = 0x00; // 先设定模式,取消 RB_UC_CLR_ALL
+
+    R8_U2EP4_1_MOD = RB_UEP4_RX_EN | RB_UEP4_TX_EN | RB_UEP1_RX_EN | RB_UEP1_TX_EN; // 端点4 OUT+IN,端点1 OUT+IN
+    R8_U2EP2_3_MOD = RB_UEP2_RX_EN | RB_UEP2_TX_EN | RB_UEP3_RX_EN | RB_UEP3_TX_EN; // 端点2 OUT+IN,端点3 OUT+IN
+
+    R16_U2EP0_DMA = (uint16_t)(uint32_t)pU2EP0_RAM_Addr;
+    R16_U2EP1_DMA = (uint16_t)(uint32_t)pU2EP1_RAM_Addr;
+    R16_U2EP2_DMA = (uint16_t)(uint32_t)pU2EP2_RAM_Addr;
+    R16_U2EP3_DMA = (uint16_t)(uint32_t)pU2EP3_RAM_Addr;
+
+    R8_U2EP0_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
+    R8_U2EP1_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK | RB_UEP_AUTO_TOG;
+    R8_U2EP2_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK | RB_UEP_AUTO_TOG;
+    R8_U2EP3_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK | RB_UEP_AUTO_TOG;
+    R8_U2EP4_CTRL = UEP_R_RES_ACK | UEP_T_RES_NAK;
+
+    R8_USB2_DEV_AD = 0x00;
+    R8_USB2_CTRL = RB_UC_DEV_PU_EN | RB_UC_INT_BUSY | RB_UC_DMA_EN; // 启动USB设备及DMA，在中断期间中断标志未清除前自动返回NAK
+    R16_PIN_ANALOG_IE |= RB_PIN_USB2_IE | RB_PIN_USB2_DP_PU;        // 防止USB端口浮空及上拉电阻
+    R8_USB2_INT_FG = 0xFF;                                          // 清中断标志
+    R8_U2DEV_CTRL = RB_UD_PD_DIS | RB_UD_PORT_EN;                   // 允许USB端口
+    R8_USB2_INT_EN = RB_UIE_SUSPEND | RB_UIE_BUS_RST | RB_UIE_TRANSFER;
+}
+
+/*********************************************************************
+ * @fn      U2DevEP1_IN_Deal
+ *
+ * @brief   U2端点1数据上传
+ *
+ * @param   l   - 上传数据长度(<64B)
+ *
+ * @return  none
+ */
+void U2DevEP1_IN_Deal(uint8_t l)
+{
+    R8_U2EP1_T_LEN = l;
+    R8_U2EP1_CTRL = (R8_U2EP1_CTRL & ~MASK_UEP_T_RES) | UEP_T_RES_ACK;
+}
+
+/*********************************************************************
+ * @fn      U2DevEP2_IN_Deal
+ *
+ * @brief   U2端点2数据上传
+ *
+ * @param   l   - 上传数据长度(<64B)
+ *
+ * @return  none
+ */
+void U2DevEP2_IN_Deal(uint8_t l)
+{
+    R8_U2EP2_T_LEN = l;
+    R8_U2EP2_CTRL = (R8_U2EP2_CTRL & ~MASK_UEP_T_RES) | UEP_T_RES_ACK;
+}
+
+/*********************************************************************
+ * @fn      U2DevEP3_IN_Deal
+ *
+ * @brief   U2端点3数据上传
+ *
+ * @param   l   - 上传数据长度(<64B)
+ *
+ * @return  none
+ */
+void U2DevEP3_IN_Deal(uint8_t l)
+{
+    R8_U2EP3_T_LEN = l;
+    R8_U2EP3_CTRL = (R8_U2EP3_CTRL & ~MASK_UEP_T_RES) | UEP_T_RES_ACK;
+}
+
+/*********************************************************************
+ * @fn      U2DevEP4_IN_Deal
+ *
+ * @brief   U2端点4数据上传
+ *
+ * @param   l   - 上传数据长度(<64B)
+ *
+ * @return  none
+ */
+void U2DevEP4_IN_Deal(uint8_t l)
+{
+    R8_U2EP4_T_LEN = l;
+    R8_U2EP4_CTRL = (R8_U2EP4_CTRL & ~MASK_UEP_T_RES) | UEP_T_RES_ACK;
+}