Initial commit
This commit is contained in:
Puck Meerburg
1898
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH583SFR.h
Normal file
1898
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH583SFR.h
Normal file
File diff suppressed because it is too large
Load Diff
265
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_adc.h
Normal file
265
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_adc.h
Normal file
@@ -0,0 +1,265 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_adc.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_ADC_H__
|
||||
#define __CH58x_ADC_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define ROM_CFG_TMP_25C 0x7F014
|
||||
|
||||
/**
|
||||
* @brief adc single channel define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
CH_EXTIN_0 = 0, // ADC 外部模拟通道 0
|
||||
CH_EXTIN_1, // ADC 外部模拟通道 1
|
||||
CH_EXTIN_2, // ADC 外部模拟通道 2
|
||||
CH_EXTIN_3, // ADC 外部模拟通道 3
|
||||
CH_EXTIN_4, // ADC 外部模拟通道 4
|
||||
CH_EXTIN_5, // ADC 外部模拟通道 5
|
||||
CH_EXTIN_6, // ADC 外部模拟通道 6
|
||||
CH_EXTIN_7, // ADC 外部模拟通道 7
|
||||
CH_EXTIN_8, // ADC 外部模拟通道 8
|
||||
CH_EXTIN_9, // ADC 外部模拟通道 9
|
||||
CH_EXTIN_10, // ADC 外部模拟通道 10
|
||||
CH_EXTIN_11, // ADC 外部模拟通道 11
|
||||
CH_EXTIN_12, // ADC 外部模拟通道 12
|
||||
CH_EXTIN_13, // ADC 外部模拟通道 13
|
||||
|
||||
CH_INTE_VBAT = 14, // ADC 内部电池检测通道
|
||||
CH_INTE_VTEMP = 15, // ADC 内部温度传感器检测通道
|
||||
|
||||
} ADC_SingleChannelTypeDef;
|
||||
|
||||
/**
|
||||
* @brief adc differential channel define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
CH_DIFF_0_2 = 0, // ADC 差分通道 #0-#2
|
||||
CH_DIFF_1_3, // ADC 差分通道 #1-#3
|
||||
|
||||
} ADC_DiffChannelTypeDef;
|
||||
|
||||
/**
|
||||
* @brief adc sampling clock
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
SampleFreq_3_2 = 0, // 3.2M 采样频率
|
||||
SampleFreq_8, // 8M 采样频率
|
||||
SampleFreq_5_33, // 5.33M 采样频率
|
||||
SampleFreq_4, // 4M 采样频率
|
||||
} ADC_SampClkTypeDef;
|
||||
|
||||
/**
|
||||
* @brief adc signal PGA
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
ADC_PGA_1_4 = 0, // -12dB, 1/4倍
|
||||
ADC_PGA_1_2, // -6dB, 1/2倍
|
||||
ADC_PGA_0, // 0dB, 1倍，无增益
|
||||
ADC_PGA_2, // 6dB, 2倍
|
||||
} ADC_SignalPGATypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration DMA mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
ADC_Mode_Single = 0, // 单次模式
|
||||
ADC_Mode_LOOP, // 循环模式
|
||||
} ADC_DMAModeTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief 设置 ADC 采样通道
|
||||
*
|
||||
* @param d - refer to ADC_SingleChannelTypeDef
|
||||
*/
|
||||
#define ADC_ChannelCfg(d) (R8_ADC_CHANNEL = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 ADC 采样时钟
|
||||
*
|
||||
* @param d - refer to ADC_SampClkTypeDef
|
||||
*/
|
||||
#define ADC_SampClkCfg(d) (R8_ADC_CFG = R8_ADC_CFG & (~RB_ADC_CLK_DIV) | (d << 6))
|
||||
|
||||
/**
|
||||
* @brief 设置 ADC 信号增益
|
||||
*
|
||||
* @param d - refer to ADC_SignalPGATypeDef
|
||||
*/
|
||||
#define ADC_PGACfg(d) (R8_ADC_CFG = R8_ADC_CFG & (~RB_ADC_PGA_GAIN) | (d << 4))
|
||||
|
||||
/**
|
||||
* @brief 设置内部温度传感器校准值
|
||||
*
|
||||
* @param d - 校准值
|
||||
*/
|
||||
#define ADC_TempCalibCfg(d) (R8_TEM_SENSOR = R8_TEM_SENSOR & (~RB_TEM_SEN_CALIB) | d)
|
||||
|
||||
/**
|
||||
* @brief 外部信号单通道采样初始化
|
||||
*
|
||||
* @param sp - refer to ADC_SampClkTypeDef
|
||||
* @param ga - refer to ADC_SignalPGATypeDef
|
||||
*/
|
||||
void ADC_ExtSingleChSampInit(ADC_SampClkTypeDef sp, ADC_SignalPGATypeDef ga);
|
||||
|
||||
/**
|
||||
* @brief 外部信号差分通道采样初始化
|
||||
*
|
||||
* @param sp - refer to ADC_SampClkTypeDef
|
||||
* @param ga - refer to ADC_SignalPGATypeDef
|
||||
*/
|
||||
void ADC_ExtDiffChSampInit(ADC_SampClkTypeDef sp, ADC_SignalPGATypeDef ga);
|
||||
|
||||
/**
|
||||
* @brief 触摸按键通道采样初始化
|
||||
*/
|
||||
void TouchKey_ChSampInit(void);
|
||||
|
||||
/**
|
||||
* @brief 关闭TouchKey电源
|
||||
*/
|
||||
#define TouchKey_DisableTSPower() (R8_TKEY_CFG &= ~RB_TKEY_PWR_ON)
|
||||
|
||||
/**
|
||||
* @brief 内置温度传感器采样初始化
|
||||
*/
|
||||
void ADC_InterTSSampInit(void);
|
||||
|
||||
/**
|
||||
* @brief 关闭温度传感器电源
|
||||
*/
|
||||
#define ADC_DisableTSPower() (R8_TEM_SENSOR = 0)
|
||||
|
||||
/**
|
||||
* @brief 内置电池电压采样初始化
|
||||
*/
|
||||
void ADC_InterBATSampInit(void);
|
||||
|
||||
/**
|
||||
* @brief ADC执行单次转换
|
||||
*
|
||||
* @return ADC转换后的数据
|
||||
*/
|
||||
uint16_t ADC_ExcutSingleConver(void);
|
||||
|
||||
/**
|
||||
* @brief 采样数据粗调,获取偏差值,必须先配置ADC后调用此函数获取校准值
|
||||
*
|
||||
* @return 偏差
|
||||
*/
|
||||
signed short ADC_DataCalib_Rough(void);
|
||||
|
||||
/**
|
||||
* @brief TouchKey转换后数据
|
||||
*
|
||||
* @param charg - Touchkey充电时间,5bits有效, t=charg*Tadc
|
||||
* @param disch - Touchkey放电时间,3bits有效, t=disch*Tadc
|
||||
*
|
||||
* @return 当前TouchKey等效数据
|
||||
*/
|
||||
uint16_t TouchKey_ExcutSingleConver(uint8_t charg, uint8_t disch);
|
||||
|
||||
/**
|
||||
* @brief 设置连续 ADC的周期
|
||||
*
|
||||
* @param cycle - 单位为 16个系统时钟
|
||||
*/
|
||||
void ADC_AutoConverCycle(uint8_t cycle);
|
||||
|
||||
/**
|
||||
* @brief 配置DMA功能
|
||||
*
|
||||
* @param s - 是否打开DMA功能
|
||||
* @param startAddr - DMA 起始地址
|
||||
* @param endAddr - DMA 结束地址
|
||||
* @param m - 配置DMA模式
|
||||
*/
|
||||
void ADC_DMACfg(uint8_t s, uint16_t startAddr, uint16_t endAddr, ADC_DMAModeTypeDef m);
|
||||
|
||||
/**
|
||||
* @brief Convert ADC value to temperature(Celsius)
|
||||
*
|
||||
* @param adc_val - adc value
|
||||
*
|
||||
* @return temperature (Celsius)
|
||||
*/
|
||||
int adc_to_temperature_celsius(uint16_t adc_val);
|
||||
|
||||
/**
|
||||
* @brief 获取ADC转换值
|
||||
*
|
||||
* @return ADC转换值
|
||||
*/
|
||||
#define ADC_ReadConverValue() (R16_ADC_DATA)
|
||||
|
||||
/**
|
||||
* @brief ADC执行单次转换
|
||||
*/
|
||||
#define ADC_StartUp() (R8_ADC_CONVERT = RB_ADC_START)
|
||||
|
||||
/**
|
||||
* @brief 获取ADC中断状态
|
||||
*/
|
||||
#define ADC_GetITStatus() (R8_ADC_INT_FLAG & RB_ADC_IF_EOC)
|
||||
|
||||
/**
|
||||
* @brief 清除ADC中断标志
|
||||
*/
|
||||
#define ADC_ClearITFlag() (R8_ADC_CONVERT = 0)
|
||||
|
||||
/**
|
||||
* @brief 获取ADC DMA完成状态
|
||||
*/
|
||||
#define ADC_GetDMAStatus() (R8_ADC_DMA_IF & RB_ADC_IF_DMA_END)
|
||||
|
||||
/**
|
||||
* @brief 清除ADC DMA完成标志
|
||||
*/
|
||||
#define ADC_ClearDMAFlag() (R8_ADC_DMA_IF |= RB_ADC_IF_DMA_END)
|
||||
|
||||
/**
|
||||
* @brief 开启自动连续 ADC
|
||||
*/
|
||||
#define ADC_StartDMA() (R8_ADC_CTRL_DMA |= RB_ADC_AUTO_EN)
|
||||
|
||||
/**
|
||||
* @brief 停止自动连续 ADC
|
||||
*/
|
||||
#define ADC_StopDMA() (R8_ADC_CTRL_DMA &= ~RB_ADC_AUTO_EN)
|
||||
|
||||
/**
|
||||
* @brief 获取TouchKey中断状态
|
||||
*/
|
||||
#define TouchKey_GetITStatus() (R8_ADC_INT_FLAG & RB_ADC_IF_EOC)
|
||||
|
||||
/**
|
||||
* @brief 清除TouchKey中断标志
|
||||
*/
|
||||
#define TouchKey_ClearITFlag() (R8_TKEY_CTRL |= RB_TKEY_PWR_ON)
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_ADC_H__
|
||||
290
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_clk.h
Normal file
290
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_clk.h
Normal file
@@ -0,0 +1,290 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_clk.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_CLK_H__
|
||||
#define __CH58x_CLK_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief 系统主频定义
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
CLK_SOURCE_LSI = 0x00,
|
||||
CLK_SOURCE_LSE,
|
||||
|
||||
CLK_SOURCE_HSE_16MHz = 0x22,
|
||||
CLK_SOURCE_HSE_8MHz = 0x24,
|
||||
CLK_SOURCE_HSE_6_4MHz = 0x25,
|
||||
CLK_SOURCE_HSE_4MHz = 0x28,
|
||||
CLK_SOURCE_HSE_2MHz = (0x20 | 16),
|
||||
CLK_SOURCE_HSE_1MHz = (0x20 | 0),
|
||||
|
||||
CLK_SOURCE_PLL_80MHz = 0x46,
|
||||
CLK_SOURCE_PLL_60MHz = 0x48,
|
||||
CLK_SOURCE_PLL_48MHz = (0x40 | 10),
|
||||
CLK_SOURCE_PLL_40MHz = (0x40 | 12),
|
||||
CLK_SOURCE_PLL_36_9MHz = (0x40 | 13),
|
||||
CLK_SOURCE_PLL_32MHz = (0x40 | 15),
|
||||
CLK_SOURCE_PLL_30MHz = (0x40 | 16),
|
||||
CLK_SOURCE_PLL_24MHz = (0x40 | 20),
|
||||
CLK_SOURCE_PLL_20MHz = (0x40 | 24),
|
||||
CLK_SOURCE_PLL_15MHz = (0x40 | 0),
|
||||
} SYS_CLKTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32K时钟选择
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Clk32K_LSI = 0,
|
||||
Clk32K_LSE,
|
||||
|
||||
} LClk32KTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32M晶振电流挡位
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HSE_RCur_75 = 0,
|
||||
HSE_RCur_100,
|
||||
HSE_RCur_125,
|
||||
HSE_RCur_150
|
||||
|
||||
} HSECurrentTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32M晶振内部电容挡位
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HSECap_10p = 0,
|
||||
HSECap_12p,
|
||||
HSECap_14p,
|
||||
HSECap_16p,
|
||||
HSECap_18p,
|
||||
HSECap_20p,
|
||||
HSECap_22p,
|
||||
HSECap_24p
|
||||
|
||||
} HSECapTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32K晶振电流挡位
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
LSE_RCur_70 = 0,
|
||||
LSE_RCur_100,
|
||||
LSE_RCur_140,
|
||||
LSE_RCur_200
|
||||
|
||||
} LSECurrentTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32K晶振内部电容挡位
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
LSECap_2p = 0,
|
||||
LSECap_13p,
|
||||
LSECap_14p,
|
||||
LSECap_15p,
|
||||
LSECap_16p,
|
||||
LSECap_17p,
|
||||
LSECap_18p,
|
||||
LSECap_19p,
|
||||
LSECap_20p,
|
||||
LSECap_21p,
|
||||
LSECap_22p,
|
||||
LSECap_23p,
|
||||
LSECap_24p,
|
||||
LSECap_25p,
|
||||
LSECap_26p,
|
||||
LSECap_27p
|
||||
|
||||
} LSECapTypeDef;
|
||||
|
||||
#define MAX_DAY 0x00004000
|
||||
#define MAX_2_SEC 0x0000A8C0
|
||||
//#define MAX_SEC 0x545FFFFF
|
||||
|
||||
#define BEGYEAR 2020
|
||||
#define IsLeapYear(yr) (!((yr) % 400) || (((yr) % 100) && !((yr) % 4)))
|
||||
#define YearLength(yr) (IsLeapYear(yr) ? 366 : 365)
|
||||
#define monthLength(lpyr, mon) (((mon) == 1) ? (28 + (lpyr)) : (((mon) > 6) ? (((mon) & 1) ? 31 : 30) : (((mon) & 1) ? 30 : 31)))
|
||||
|
||||
/**
|
||||
* @brief rtc timer mode period define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Period_0_125_S = 0, // 0.125s 周期
|
||||
Period_0_25_S, // 0.25s 周期
|
||||
Period_0_5_S, // 0.5s 周期
|
||||
Period_1_S, // 1s 周期
|
||||
Period_2_S, // 2s 周期
|
||||
Period_4_S, // 4s 周期
|
||||
Period_8_S, // 8s 周期
|
||||
Period_16_S, // 16s 周期
|
||||
} RTC_TMRCycTypeDef;
|
||||
|
||||
/**
|
||||
* @brief rtc interrupt event define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RTC_TRIG_EVENT = 0, // RTC 触发事件
|
||||
RTC_TMR_EVENT, // RTC 周期定时事件
|
||||
|
||||
} RTC_EVENTTypeDef;
|
||||
|
||||
/**
|
||||
* @brief rtc interrupt event define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RTC_TRIG_MODE = 0, // RTC 触发模式
|
||||
RTC_TMR_MODE, // RTC 周期定时模式
|
||||
|
||||
} RTC_MODETypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
/* 校准精度越高，耗时越长 */
|
||||
Level_32 = 3, // 用时 1.2ms 1000ppm (32M 主频) 1100ppm (60M 主频)
|
||||
Level_64, // 用时 2.2ms 800ppm (32M 主频) 1000ppm (60M 主频)
|
||||
Level_128, // 用时 4.2ms 600ppm (32M 主频) 800ppm (60M 主频)
|
||||
|
||||
} Cali_LevelTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 32K 低频时钟来源
|
||||
*
|
||||
* @param hc - 选择32K使用内部还是外部
|
||||
*/
|
||||
void LClk32K_Select(LClk32KTypeDef hc);
|
||||
|
||||
/**
|
||||
* @brief HSE晶体 偏置电流配置
|
||||
*
|
||||
* @param c - 75%,100%,125%,150%
|
||||
*/
|
||||
void HSECFG_Current(HSECurrentTypeDef c);
|
||||
|
||||
/**
|
||||
* @brief HSE晶体 负载电容配置
|
||||
*
|
||||
* @param c - refer to HSECapTypeDef
|
||||
*/
|
||||
void HSECFG_Capacitance(HSECapTypeDef c);
|
||||
|
||||
/**
|
||||
* @brief LSE晶体 偏置电流配置
|
||||
*
|
||||
* @param c - 70%,100%,140%,200%
|
||||
*/
|
||||
void LSECFG_Current(LSECurrentTypeDef c);
|
||||
|
||||
/**
|
||||
* @brief LSE晶体 负载电容配置
|
||||
*
|
||||
* @param c - refer to LSECapTypeDef
|
||||
*/
|
||||
void LSECFG_Capacitance(LSECapTypeDef c);
|
||||
|
||||
void Calibration_LSI(Cali_LevelTypeDef cali_Lv); /* 用主频校准内部32K时钟 */
|
||||
|
||||
/**
|
||||
* @brief RTC时钟初始化当前时间
|
||||
*
|
||||
* @param y - 配置年，MAX_Y = BEGYEAR + 44
|
||||
* @param mon - 配置月，MAX_MON = 12
|
||||
* @param d - 配置日，MAX_D = 31
|
||||
* @param h - 配置小时，MAX_H = 23
|
||||
* @param m - 配置分钟，MAX_M = 59
|
||||
* @param s - 配置秒，MAX_S = 59
|
||||
*/
|
||||
void RTC_InitTime(uint16_t y, uint16_t mon, uint16_t d, uint16_t h, uint16_t m, uint16_t s);
|
||||
|
||||
/**
|
||||
* @brief 获取当前时间
|
||||
*
|
||||
* @param py - 获取到的年，MAX_Y = BEGYEAR + 44
|
||||
* @param pmon - 获取到的月，MAX_MON = 12
|
||||
* @param pd - 获取到的日，MAX_D = 31
|
||||
* @param ph - 获取到的小时，MAX_H = 23
|
||||
* @param pm - 获取到的分钟，MAX_M = 59
|
||||
* @param ps - 获取到的秒，MAX_S = 59
|
||||
*/
|
||||
void RTC_GetTime(uint16_t *py, uint16_t *pmon, uint16_t *pd, uint16_t *ph, uint16_t *pm, uint16_t *ps);
|
||||
|
||||
/**
|
||||
* @brief 基于LSE/LSI时钟，配置当前RTC 周期数
|
||||
*
|
||||
* @param cyc - 配置周期计数初值，MAX_CYC = 0xA8BFFFFF = 2831155199
|
||||
*/
|
||||
void RTC_SetCycle32k(uint32_t cyc);
|
||||
|
||||
/**
|
||||
* @brief 基于LSE/LSI时钟，获取当前RTC 周期数
|
||||
*
|
||||
* @return 当前周期数，MAX_CYC = 0xA8BFFFFF = 2831155199
|
||||
*/
|
||||
uint32_t RTC_GetCycle32k(void);
|
||||
|
||||
/**
|
||||
* @brief RTC定时模式配置（注意定时基准固定为32768Hz）
|
||||
*
|
||||
* @param t - refer to RTC_TMRCycTypeDef
|
||||
*/
|
||||
void RTC_TRIGFunCfg(uint32_t cyc);
|
||||
|
||||
/**
|
||||
* @brief RTC定时模式配置（注意定时基准固定为32768Hz）
|
||||
*
|
||||
* @param t - refer to RTC_TMRCycTypeDef
|
||||
*/
|
||||
void RTC_TMRFunCfg(RTC_TMRCycTypeDef t);
|
||||
|
||||
/**
|
||||
* @brief RTC 模式功能关闭
|
||||
*
|
||||
* @param m - 需要关闭的当前模式
|
||||
*/
|
||||
void RTC_ModeFunDisable(RTC_MODETypeDef m);
|
||||
|
||||
/**
|
||||
* @brief 获取RTC中断标志
|
||||
*
|
||||
* @param f - refer to RTC_EVENTTypeDef
|
||||
*
|
||||
* @return 中断标志状态
|
||||
*/
|
||||
uint8_t RTC_GetITFlag(RTC_EVENTTypeDef f);
|
||||
|
||||
/**
|
||||
* @brief 清除RTC中断标志
|
||||
*
|
||||
* @param f - refer to RTC_EVENTTypeDef
|
||||
*/
|
||||
void RTC_ClearITFlag(RTC_EVENTTypeDef f);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_CLK_H__
|
||||
@@ -0,0 +1,91 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_common.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
#ifndef __CH58x_COMM_H__
|
||||
#define __CH58x_COMM_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
#ifndef NULL
|
||||
#define NULL 0
|
||||
#endif
|
||||
#define ALL 0xFFFF
|
||||
|
||||
#ifndef __HIGH_CODE
|
||||
#define __HIGH_CODE __attribute__((section(".highcode")))
|
||||
#endif
|
||||
|
||||
#ifndef __INTERRUPT
|
||||
#ifdef INT_SOFT
|
||||
#define __INTERRUPT __attribute__((interrupt()))
|
||||
#else
|
||||
#define __INTERRUPT __attribute__((interrupt("WCH-Interrupt-fast")))
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief 系统主频时钟（Hz）
|
||||
*/
|
||||
#ifndef FREQ_SYS
|
||||
#define FREQ_SYS 60000000
|
||||
#endif
|
||||
|
||||
#ifndef SAFEOPERATE
|
||||
#define SAFEOPERATE __nop();__nop()
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief 32K时钟（Hz）
|
||||
*/
|
||||
#ifdef CLK_OSC32K
|
||||
#if ( CLK_OSC32K == 1 )
|
||||
#define CAB_LSIFQ 32000
|
||||
#else
|
||||
#define CAB_LSIFQ 32768
|
||||
#endif
|
||||
#else
|
||||
#define CAB_LSIFQ 32000
|
||||
#endif
|
||||
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#include "CH583SFR.h"
|
||||
#include "core_riscv.h"
|
||||
#include "CH58x_clk.h"
|
||||
#include "CH58x_uart.h"
|
||||
#include "CH58x_gpio.h"
|
||||
#include "CH58x_i2c.h"
|
||||
#include "CH58x_flash.h"
|
||||
#include "CH58x_pwr.h"
|
||||
#include "CH58x_pwm.h"
|
||||
#include "CH58x_adc.h"
|
||||
#include "CH58x_sys.h"
|
||||
#include "CH58x_timer.h"
|
||||
#include "CH58x_spi.h"
|
||||
#include "CH58x_usbhost.h"
|
||||
#include "ISP583.h"
|
||||
|
||||
|
||||
#define DelayMs(x) mDelaymS(x)
|
||||
#define DelayUs(x) mDelayuS(x)
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_COMM_H__
|
||||
|
||||
42
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_flash.h
Normal file
42
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_flash.h
Normal file
@@ -0,0 +1,42 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_flash.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_FLASH_H__
|
||||
#define __CH58x_FLASH_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief ¶ÁÈ¡Flash-ROM
|
||||
*
|
||||
* @param StartAddr - read address
|
||||
* @param Buffer - read buffer
|
||||
* @param len - read len
|
||||
*/
|
||||
void FLASH_ROM_READ(uint32_t StartAddr, void *Buffer, uint32_t len);
|
||||
|
||||
void FLASH_ROM_READ(UINT32 StartAddr, PVOID Buffer, UINT32 len); /* ¶ÁÈ¡Flash-ROM */
|
||||
|
||||
UINT8 UserOptionByteConfig(FunctionalState RESET_EN, FunctionalState BOOT_PIN, FunctionalState UART_NO_KEY_EN,
|
||||
UINT32 FLASHProt_Size);
|
||||
|
||||
UINT8 UserOptionByteClose_SWD(void);
|
||||
|
||||
void UserOptionByte_Active(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_FLASH_H__
|
||||
274
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h
Normal file
274
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h
Normal file
@@ -0,0 +1,274 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_gpio.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_GPIO_H__
|
||||
#define __CH58x_GPIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief GPIO_pins_define
|
||||
*/
|
||||
#define GPIO_Pin_0 (0x00000001) /*!< Pin 0 selected */
|
||||
#define GPIO_Pin_1 (0x00000002) /*!< Pin 1 selected */
|
||||
#define GPIO_Pin_2 (0x00000004) /*!< Pin 2 selected */
|
||||
#define GPIO_Pin_3 (0x00000008) /*!< Pin 3 selected */
|
||||
#define GPIO_Pin_4 (0x00000010) /*!< Pin 4 selected */
|
||||
#define GPIO_Pin_5 (0x00000020) /*!< Pin 5 selected */
|
||||
#define GPIO_Pin_6 (0x00000040) /*!< Pin 6 selected */
|
||||
#define GPIO_Pin_7 (0x00000080) /*!< Pin 7 selected */
|
||||
#define GPIO_Pin_8 (0x00000100) /*!< Pin 8 selected */
|
||||
#define GPIO_Pin_9 (0x00000200) /*!< Pin 9 selected */
|
||||
#define GPIO_Pin_10 (0x00000400) /*!< Pin 10 selected */
|
||||
#define GPIO_Pin_11 (0x00000800) /*!< Pin 11 selected */
|
||||
#define GPIO_Pin_12 (0x00001000) /*!< Pin 12 selected */
|
||||
#define GPIO_Pin_13 (0x00002000) /*!< Pin 13 selected */
|
||||
#define GPIO_Pin_14 (0x00004000) /*!< Pin 14 selected */
|
||||
#define GPIO_Pin_15 (0x00008000) /*!< Pin 15 selected */
|
||||
#define GPIO_Pin_16 (0x00010000) /*!< Pin 16 selected */
|
||||
#define GPIO_Pin_17 (0x00020000) /*!< Pin 17 selected */
|
||||
#define GPIO_Pin_18 (0x00040000) /*!< Pin 18 selected */
|
||||
#define GPIO_Pin_19 (0x00080000) /*!< Pin 19 selected */
|
||||
#define GPIO_Pin_20 (0x00100000) /*!< Pin 20 selected */
|
||||
#define GPIO_Pin_21 (0x00200000) /*!< Pin 21 selected */
|
||||
#define GPIO_Pin_22 (0x00400000) /*!< Pin 22 selected */
|
||||
#define GPIO_Pin_23 (0x00800000) /*!< Pin 23 selected */
|
||||
#define GPIO_Pin_All (0xFFFFFFFF) /*!< All pins selected */
|
||||
|
||||
/**
|
||||
* @brief Configuration GPIO Mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_ModeIN_Floating, //浮空输入
|
||||
GPIO_ModeIN_PU, //上拉输入
|
||||
GPIO_ModeIN_PD, //下拉输入
|
||||
GPIO_ModeOut_PP_5mA, //推挽输出最大5mA
|
||||
GPIO_ModeOut_PP_20mA, //推挽输出最大20mA
|
||||
|
||||
} GPIOModeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration GPIO IT Mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_ITMode_LowLevel, //低电平触发
|
||||
GPIO_ITMode_HighLevel, //高电平触发
|
||||
GPIO_ITMode_FallEdge, //下降沿触发
|
||||
GPIO_ITMode_RiseEdge, //上升沿触发
|
||||
|
||||
} GPIOITModeTpDef;
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口引脚模式配置
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
* @param mode - 输入输出类型
|
||||
*/
|
||||
void GPIOA_ModeCfg(uint32_t pin, GPIOModeTypeDef mode);
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口引脚模式配置
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
* @param mode - 输入输出类型
|
||||
*/
|
||||
void GPIOB_ModeCfg(uint32_t pin, GPIOModeTypeDef mode);
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口引脚输出置低
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*/
|
||||
#define GPIOA_ResetBits(pin) (R32_PA_CLR |= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口引脚输出置高
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*/
|
||||
#define GPIOA_SetBits(pin) (R32_PA_OUT |= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口引脚输出置低
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*/
|
||||
#define GPIOB_ResetBits(pin) (R32_PB_CLR |= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口引脚输出置高
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*/
|
||||
#define GPIOB_SetBits(pin) (R32_PB_OUT |= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口引脚输出电平翻转
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*/
|
||||
#define GPIOA_InverseBits(pin) (R32_PA_OUT ^= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口引脚输出电平翻转
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*/
|
||||
#define GPIOB_InverseBits(pin) (R32_PB_OUT ^= pin)
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口32位数据返回，低16位有效
|
||||
*
|
||||
* @return GPIOA端口32位数据
|
||||
*/
|
||||
#define GPIOA_ReadPort() (R32_PA_PIN)
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口32位数据返回，低24位有效
|
||||
*
|
||||
* @return GPIOB端口32位数据
|
||||
*/
|
||||
#define GPIOB_ReadPort() (R32_PB_PIN)
|
||||
|
||||
/**
|
||||
* @brief GPIOA端口引脚状态，0-引脚低电平，(!0)-引脚高电平
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*
|
||||
* @return GPIOA端口引脚状态
|
||||
*/
|
||||
#define GPIOA_ReadPortPin(pin) (R32_PA_PIN & (pin))
|
||||
|
||||
/**
|
||||
* @brief GPIOB端口引脚状态，0-引脚低电平，(!0)-引脚高电平
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*
|
||||
* @return GPIOB端口引脚状态
|
||||
*/
|
||||
#define GPIOB_ReadPortPin(pin) (R32_PB_PIN & (pin))
|
||||
|
||||
/**
|
||||
* @brief GPIOA引脚中断模式配置
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
* @param mode - 触发类型
|
||||
*/
|
||||
void GPIOA_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode);
|
||||
|
||||
/**
|
||||
* @brief GPIOB引脚中断模式配置
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
* @param mode - 触发类型
|
||||
*/
|
||||
void GPIOB_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode);
|
||||
|
||||
/**
|
||||
* @brief 读取GPIOA端口中断标志状态
|
||||
*
|
||||
* @return GPIOA端口中断标志状态
|
||||
*/
|
||||
#define GPIOA_ReadITFlagPort() (R16_PA_INT_IF)
|
||||
|
||||
/**
|
||||
* @brief 读取GPIOB端口中断标志状态
|
||||
*
|
||||
* @return GPIOB端口中断标志状态
|
||||
*/
|
||||
#define GPIOB_ReadITFlagPort() ((R16_PB_INT_IF & (~((GPIO_Pin_22 | GPIO_Pin_23) >> 14))) | ((R16_PB_INT_IF << 14) & (GPIO_Pin_22 | GPIO_Pin_23)))
|
||||
|
||||
/**
|
||||
* @brief 读取GPIOA端口引脚中断标志状态
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*
|
||||
* @return GPIOA端口引脚中断标志状态
|
||||
*/
|
||||
#define GPIOA_ReadITFlagBit(pin) (R16_PA_INT_IF & (pin))
|
||||
|
||||
/**
|
||||
* @brief 读取GPIOB端口引脚中断标志状态
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*
|
||||
* @return GPIOB端口引脚中断标志状态
|
||||
*/
|
||||
#define GPIOB_ReadITFlagBit(pin) (R16_PB_INT_IF & ((pin) | (((pin) & (GPIO_Pin_22 | GPIO_Pin_23)) >> 14)))
|
||||
|
||||
/**
|
||||
* @brief 清除GPIOA端口引脚中断标志状态
|
||||
*
|
||||
* @param pin - PA0-PA15
|
||||
*/
|
||||
#define GPIOA_ClearITFlagBit(pin) (R16_PA_INT_IF = pin)
|
||||
|
||||
/**
|
||||
* @brief 清除GPIOB端口引脚中断标志状态
|
||||
*
|
||||
* @param pin - PB0-PB23
|
||||
*/
|
||||
#define GPIOB_ClearITFlagBit(pin) (R16_PB_INT_IF = ((pin) | (((pin) & (GPIO_Pin_22 | GPIO_Pin_23)) >> 14)))
|
||||
|
||||
/**
|
||||
* @brief 外设功能引脚映射
|
||||
*
|
||||
* @param s - 是否使能映射
|
||||
* @param perph - RB_RF_ANT_SW_EN - RF antenna switch control output on PB16/PB17/PB18/PB19/PB20/PB21
|
||||
* RB_PIN_U0_INV - RXD0/RXD0_/TXD0/TXD0_ invert input/output
|
||||
* RB_PIN_INTX - INTX: INT24/INT25 PB8/PB9 -> INT24_/INT25_ PB22/PB23
|
||||
* RB_PIN_MODEM - MODEM: PB1/PB5 -> PB14/PB15
|
||||
* RB_PIN_I2C - I2C: PB13/PB12 -> PB21/PB20
|
||||
* RB_PIN_PWMX - PWMX: PA12/PA13/PB4/PB6/PB7 -> PA6/PA7/PB1/PB2/PB3
|
||||
* RB_PIN_SPI0 - SPI0: PA12/PA13/PA14/PA15 -> PB12/PB13/PB14/PB15
|
||||
* RB_PIN_UART3 - UART3: PA4/PA5 -> PB20/PB21
|
||||
* RB_PIN_UART2 - UART2: PA6/PA7 -> PB22/PB23
|
||||
* RB_PIN_UART1 - UART1: PA8/PA9 -> PB12/PB13
|
||||
* RB_PIN_UART0 - UART0: PB4/PB7 -> PA15/PA14
|
||||
* RB_PIN_TMR3 - TMR2: PA9 -> PB23
|
||||
* RB_PIN_TMR2 - TMR2: PA11 -> PB11
|
||||
* RB_PIN_TMR1 - TMR1: PA10 -> PB10
|
||||
* RB_PIN_TMR0 - TMR0: PA9 -> PB23
|
||||
*/
|
||||
void GPIOPinRemap(FunctionalState s, uint16_t perph);
|
||||
|
||||
/**
|
||||
* @brief 模拟外设GPIO引脚功能控制
|
||||
*
|
||||
* @param s - 是否启用模拟外设功能
|
||||
* @param perph - RB_PIN_ADC8_9_IE - ADC/TKEY 9/8通道
|
||||
* RB_PIN_ADC6_7_IE - ADC/TKEY 7/6通道
|
||||
* RB_PIN_ADC10_IE - ADC/TKEY 10通道
|
||||
* RB_PIN_ADC11_IE - ADC/TKEY 11 通道
|
||||
* RB_PIN_USB2_DP_PU - USB2 U2D+引脚内部上拉电阻
|
||||
* RB_PIN_USB2_IE - USB2引脚
|
||||
* RB_PIN_USB_DP_PU - USB UD+引脚内部上拉电阻
|
||||
* RB_PIN_USB_IE - USB 引脚
|
||||
* RB_PIN_ADC0_IE - ADC/TKEY 0 通道
|
||||
* RB_PIN_ADC1_IE - ADC/TKEY 1 通道
|
||||
* RB_PIN_ADC12_IE - ADC/TKEY 12 通道
|
||||
* RB_PIN_ADC13_IE - ADC/TKEY 13 通道
|
||||
* RB_PIN_XT32K_IE - 32KHz晶振LSE引脚
|
||||
* RB_PIN_ADC2_3_IE - ADC/TKEY 2/3 通道
|
||||
* RB_PIN_ADC4_5_IE - ADC/TKEY 4/5 通道
|
||||
*/
|
||||
void GPIOAGPPCfg(FunctionalState s, uint16_t perph);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_GPIO_H__
|
||||
180
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_i2c.h
Normal file
180
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_i2c.h
Normal file
@@ -0,0 +1,180 @@
|
||||
|
||||
|
||||
#ifndef __CH58x_I2C_H__
|
||||
#define __CH58x_I2C_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* I2C_transfer_direction */
|
||||
#define I2C_Direction_Transmitter ((uint8_t)0x00)
|
||||
#define I2C_Direction_Receiver ((uint8_t)0x01)
|
||||
|
||||
/* I2C ADD0 mask */
|
||||
#define OADDR1_ADD0_Set ((uint16_t)0x0001)
|
||||
#define OADDR1_ADD0_Reset ((uint16_t)0xFFFE)
|
||||
|
||||
/* I2C_NACK_position */
|
||||
#define I2C_NACKPosition_Next ((uint16_t)RB_I2C_POS)
|
||||
#define I2C_NACKPosition_Current ((uint16_t)~RB_I2C_POS)
|
||||
|
||||
/* I2C_PEC_position */
|
||||
#define I2C_PECPosition_Next ((uint16_t)RB_I2C_POS)
|
||||
#define I2C_PECPosition_Current ((uint16_t)~RB_I2C_POS)
|
||||
|
||||
/* I2C_SMBus_alert_pin_level */
|
||||
#define I2C_SMBusAlert_Low ((uint16_t)RB_I2C_ALERT)
|
||||
#define I2C_SMBusAlert_High ((uint16_t)~RB_I2C_ALERT)
|
||||
|
||||
/* I2C FLAG mask */
|
||||
#define FLAG_Mask ((uint32_t)0x00FFFFFF)
|
||||
|
||||
/* I2C Interrupt Enable mask */
|
||||
#define ITEN_Mask ((uint32_t)0x07000000)
|
||||
|
||||
/* I2C_mode */
|
||||
typedef enum
|
||||
{
|
||||
I2C_Mode_I2C = 0x0000,
|
||||
I2C_Mode_SMBusDevice = 0x0002,
|
||||
I2C_Mode_SMBusHost = 0x000A,
|
||||
} I2C_ModeTypeDef;
|
||||
|
||||
/* I2C_duty_cycle_in_fast_mode */
|
||||
typedef enum
|
||||
{
|
||||
I2C_DutyCycle_16_9 = RB_I2C_DUTY, /* I2C fast mode Tlow/Thigh = 16/9 */
|
||||
I2C_DutyCycle_2 = 0x0000, /* I2C fast mode Tlow/Thigh = 2 */
|
||||
} I2C_DutyTypeDef;
|
||||
|
||||
/* I2C_acknowledgement - Enables or disables the acknowledgement.*/
|
||||
typedef enum
|
||||
{
|
||||
I2C_Ack_Enable = RB_I2C_ACK,
|
||||
I2C_Ack_Disable = 0x0000,
|
||||
} I2C_AckTypeDef;
|
||||
|
||||
/* I2C_acknowledged_address - Specifies if 7-bit or 10-bit address is acknowledged. */
|
||||
typedef enum
|
||||
{
|
||||
I2C_AckAddr_7bit = 0x4000,
|
||||
I2C_AckAddr_10bit = 0xC000,
|
||||
} I2C_AckAddrTypeDef;
|
||||
|
||||
/* I2C_interrupts_definition */
|
||||
typedef enum
|
||||
{
|
||||
I2C_IT_BUF = 0x0400, /* Buffer interrupt mask. */
|
||||
I2C_IT_EVT = 0x0200, /* Event interrupt mask. */
|
||||
I2C_IT_ERR = 0x0100, /* Error interrupt mask. */
|
||||
} I2C_ITTypeDef;
|
||||
|
||||
/* I2C_interrupts_definition */
|
||||
#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
|
||||
#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
|
||||
#define I2C_IT_PECERR ((uint32_t)0x01001000)
|
||||
#define I2C_IT_OVR ((uint32_t)0x01000800)
|
||||
#define I2C_IT_AF ((uint32_t)0x01000400)
|
||||
#define I2C_IT_ARLO ((uint32_t)0x01000200)
|
||||
#define I2C_IT_BERR ((uint32_t)0x01000100)
|
||||
#define I2C_IT_TXE ((uint32_t)0x06000080)
|
||||
#define I2C_IT_RXNE ((uint32_t)0x06000040)
|
||||
#define I2C_IT_STOPF ((uint32_t)0x02000010)
|
||||
#define I2C_IT_ADD10 ((uint32_t)0x02000008)
|
||||
#define I2C_IT_BTF ((uint32_t)0x02000004)
|
||||
#define I2C_IT_ADDR ((uint32_t)0x02000002)
|
||||
#define I2C_IT_SB ((uint32_t)0x02000001)
|
||||
|
||||
/* SR2 register flags */
|
||||
#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
|
||||
#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
|
||||
#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
|
||||
#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
|
||||
#define I2C_FLAG_TRA ((uint32_t)0x00040000)
|
||||
#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
|
||||
#define I2C_FLAG_MSL ((uint32_t)0x00010000)
|
||||
|
||||
/* SR1 register flags */
|
||||
#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
|
||||
#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
|
||||
#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
|
||||
#define I2C_FLAG_OVR ((uint32_t)0x10000800)
|
||||
#define I2C_FLAG_AF ((uint32_t)0x10000400)
|
||||
#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
|
||||
#define I2C_FLAG_BERR ((uint32_t)0x10000100)
|
||||
#define I2C_FLAG_TXE ((uint32_t)0x10000080)
|
||||
#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
|
||||
#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
|
||||
#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
|
||||
#define I2C_FLAG_BTF ((uint32_t)0x10000004)
|
||||
#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
|
||||
#define I2C_FLAG_SB ((uint32_t)0x10000001)
|
||||
|
||||
/****************I2C Master Events (Events grouped in order of communication)********************/
|
||||
|
||||
#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
|
||||
#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
|
||||
#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
|
||||
#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
|
||||
#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
|
||||
#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
|
||||
#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
|
||||
|
||||
/******************I2C Slave Events (Events grouped in order of communication)******************/
|
||||
|
||||
#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
|
||||
#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
|
||||
#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
|
||||
#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
|
||||
#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
|
||||
#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
|
||||
#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
|
||||
#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
|
||||
#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
|
||||
#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
|
||||
|
||||
void I2C_Init(I2C_ModeTypeDef I2C_Mode, UINT32 I2C_ClockSpeed, I2C_DutyTypeDef I2C_DutyCycle,
|
||||
I2C_AckTypeDef I2C_Ack, I2C_AckAddrTypeDef I2C_AckAddr, UINT16 I2C_OwnAddress1);
|
||||
void I2C_Cmd(FunctionalState NewState);
|
||||
void I2C_GenerateSTART(FunctionalState NewState);
|
||||
void I2C_GenerateSTOP(FunctionalState NewState);
|
||||
void I2C_AcknowledgeConfig(FunctionalState NewState);
|
||||
void I2C_OwnAddress2Config(uint8_t Address);
|
||||
void I2C_DualAddressCmd(FunctionalState NewState);
|
||||
void I2C_GeneralCallCmd(FunctionalState NewState);
|
||||
void I2C_ITConfig(I2C_ITTypeDef I2C_IT, FunctionalState NewState);
|
||||
void I2C_SendData(uint8_t Data);
|
||||
|
||||
uint8_t I2C_ReceiveData(void);
|
||||
|
||||
void I2C_Send7bitAddress(uint8_t Address, uint8_t I2C_Direction);
|
||||
void I2C_SoftwareResetCmd(FunctionalState NewState);
|
||||
void I2C_NACKPositionConfig(uint16_t I2C_NACKPosition);
|
||||
void I2C_SMBusAlertConfig(uint16_t I2C_SMBusAlert);
|
||||
void I2C_TransmitPEC(FunctionalState NewState);
|
||||
void I2C_PECPositionConfig(uint16_t I2C_PECPosition);
|
||||
void I2C_CalculatePEC(FunctionalState NewState);
|
||||
|
||||
uint8_t I2C_GetPEC(void);
|
||||
|
||||
void I2C_ARPCmd(FunctionalState NewState);
|
||||
void I2C_StretchClockCmd(FunctionalState NewState);
|
||||
void I2C_FastModeDutyCycleConfig(uint16_t I2C_DutyCycle);
|
||||
|
||||
/****************************************************************************************
|
||||
* I2C State Monitoring Functions
|
||||
****************************************************************************************/
|
||||
uint8_t I2C_CheckEvent(uint32_t I2C_EVENT);
|
||||
uint32_t I2C_GetLastEvent(void);
|
||||
FlagStatus I2C_GetFlagStatus(uint32_t I2C_FLAG);
|
||||
|
||||
void I2C_ClearFlag(uint32_t I2C_FLAG);
|
||||
ITStatus I2C_GetITStatus(uint32_t I2C_IT);
|
||||
void I2C_ClearITPendingBit(uint32_t I2C_IT);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_I2C_H__
|
||||
152
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwm.h
Normal file
152
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwm.h
Normal file
@@ -0,0 +1,152 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_pwm.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_PWM_H__
|
||||
#define __CH58x_PWM_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief channel of PWM define
|
||||
*/
|
||||
#define CH_PWM4 0x01 // PWM4 通道
|
||||
#define CH_PWM5 0x02 // PWM5 通道
|
||||
#define CH_PWM6 0x04 // PWM6 通道
|
||||
#define CH_PWM7 0x08 // PWM7 通道
|
||||
#define CH_PWM8 0x10 // PWM8 通道
|
||||
#define CH_PWM9 0x20 // PWM9 通道
|
||||
#define CH_PWM10 0x40 // PWM10 通道
|
||||
#define CH_PWM11 0x80 // PWM11 通道
|
||||
|
||||
/**
|
||||
* @brief channel of PWM define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
High_Level = 0, // 默认低电平，高电平有效
|
||||
Low_Level, // 默认高电平，低电平有效
|
||||
} PWMX_PolarTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration PWM4_11 Cycle size
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
PWMX_Cycle_256 = 0, // 256 个PWMX周期
|
||||
PWMX_Cycle_255, // 255 个PWMX周期
|
||||
PWMX_Cycle_128, // 128 个PWMX周期
|
||||
PWMX_Cycle_127, // 127 个PWMX周期
|
||||
PWMX_Cycle_64, // 64 个PWMX周期
|
||||
PWMX_Cycle_63, // 63 个PWMX周期
|
||||
PWMX_Cycle_32, // 32 个PWMX周期
|
||||
PWMX_Cycle_31, // 31 个PWMX周期
|
||||
} PWMX_CycleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief PWM4-PWM11 通道基准时钟配置
|
||||
*
|
||||
* @param d - 通道基准时钟 = d*Tsys
|
||||
*/
|
||||
#define PWMX_CLKCfg(d) (R8_PWM_CLOCK_DIV = d)
|
||||
|
||||
/**
|
||||
* @brief PWM4-PWM11基准时钟配置
|
||||
*
|
||||
* @param cyc - refer to PWMX_CycleTypeDef
|
||||
*/
|
||||
void PWMX_CycleCfg(PWMX_CycleTypeDef cyc);
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM4 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM4_ActDataWidth(d) (R8_PWM4_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM5 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM5_ActDataWidth(d) (R8_PWM5_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM6 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM6_ActDataWidth(d) (R8_PWM6_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM7 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM7_ActDataWidth(d) (R8_PWM7_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM8 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM8_ActDataWidth(d) (R8_PWM8_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM9 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM9_ActDataWidth(d) (R8_PWM9_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM10 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM10_ActDataWidth(d) (R8_PWM10_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief 设置 PWM11 有效数据脉宽
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define PWM11_ActDataWidth(d) (R8_PWM11_DATA = d)
|
||||
|
||||
/**
|
||||
* @brief PWM4-PWM11通道输出波形配置
|
||||
*
|
||||
* @param ch - select channel of pwm, refer to channel of PWM define
|
||||
* @param da - effective pulse width
|
||||
* @param pr - select wave polar, refer to PWMX_PolarTypeDef
|
||||
* @param s - control pwmx function, ENABLE or DISABLE
|
||||
*/
|
||||
void PWMX_ACTOUT(uint8_t ch, uint8_t da, PWMX_PolarTypeDef pr, FunctionalState s);
|
||||
|
||||
/**
|
||||
* @brief PWM 交替输出模式配置
|
||||
*
|
||||
* @param ch - select group of PWM alternate output
|
||||
* RB_PWM4_5_STAG_EN - PWM4 和 PWM5 通道交替输出
|
||||
* RB_PWM6_7_STAG_EN - PWM6 和 PWM7 通道交替输出
|
||||
* RB_PWM8_9_STAG_EN - PWM8 和 PWM9 通道交替输出
|
||||
* RB_PWM10_11_STAG_EN - PWM10 和 PWM11 通道交替输出
|
||||
* @param s - control pwmx function, ENABLE or DISABLE
|
||||
*/
|
||||
void PWMX_AlterOutCfg(uint8_t ch, FunctionalState s);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_PWM_H__
|
||||
167
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h
Normal file
167
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h
Normal file
@@ -0,0 +1,167 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_pwr.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_PWR_H__
|
||||
#define __CH58x_PWR_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Peripher CLK control bit define
|
||||
*/
|
||||
#define BIT_SLP_CLK_TMR0 (0x00000001) /*!< TMR0 peripher clk bit */
|
||||
#define BIT_SLP_CLK_TMR1 (0x00000002) /*!< TMR1 peripher clk bit */
|
||||
#define BIT_SLP_CLK_TMR2 (0x00000004) /*!< TMR2 peripher clk bit */
|
||||
#define BIT_SLP_CLK_TMR3 (0x00000008) /*!< TMR3 peripher clk bit */
|
||||
#define BIT_SLP_CLK_UART0 (0x00000010) /*!< UART0 peripher clk bit */
|
||||
#define BIT_SLP_CLK_UART1 (0x00000020) /*!< UART1 peripher clk bit */
|
||||
#define BIT_SLP_CLK_UART2 (0x00000040) /*!< UART2 peripher clk bit */
|
||||
#define BIT_SLP_CLK_UART3 (0x00000080) /*!< UART3 peripher clk bit */
|
||||
#define BIT_SLP_CLK_SPI0 (0x00000100) /*!< SPI0 peripher clk bit */
|
||||
//#define BIT_SLP_CLK_SPI1 (0x00000200) /*!< SPI1 peripher clk bit */
|
||||
#define BIT_SLP_CLK_PWMX (0x00000400) /*!< PWMX peripher clk bit */
|
||||
//#define BIT_SLP_CLK_LCD (0x00000800) /*!< LCD peripher clk bit */
|
||||
#define BIT_SLP_CLK_USB (0x00001000) /*!< USB peripher clk bit */
|
||||
//#define BIT_SLP_CLK_ETH (0x00002000) /*!< ETH peripher clk bit */
|
||||
//#define BIT_SLP_CLK_LED (0x00004000) /*!< LED peripher clk bit */
|
||||
#define BIT_SLP_CLK_BLE (0x00008000) /*!< BLE peripher clk bit */
|
||||
|
||||
#define BIT_SLP_CLK_RAMX (0x10000000) /*!< main SRAM RAM16K peripher clk bit */
|
||||
#define BIT_SLP_CLK_RAM2K (0x20000000) /*!< RAM2K peripher clk bit */
|
||||
#define BIT_SLP_CLK_ALL (0x3000FFFF) /*!< All peripher clk bit */
|
||||
|
||||
/**
|
||||
* @brief unit of controllable power supply
|
||||
*/
|
||||
#define UNIT_SYS_LSE RB_CLK_XT32K_PON // 外部32K 时钟振荡
|
||||
#define UNIT_SYS_LSI RB_CLK_INT32K_PON // 内部32K 时钟振荡
|
||||
#define UNIT_SYS_HSE RB_CLK_XT32M_PON // 外部32M 时钟振荡
|
||||
#define UNIT_SYS_PLL RB_CLK_PLL_PON // PLL 时钟振荡
|
||||
|
||||
/**
|
||||
* @brief wakeup mode define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Short_Delay = 0,
|
||||
Long_Delay,
|
||||
|
||||
} WakeUP_ModeypeDef;
|
||||
|
||||
/**
|
||||
* @brief wakeup mode define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
/* 下面等级将使用高精度监控，210uA消耗 */
|
||||
HALevel_1V9 = 0, // 1.7-1.9
|
||||
HALevel_2V1, // 1.9-2.1
|
||||
HALevel_2V3, // 2.1-2.3
|
||||
HALevel_2V5, // 2.3-2.5
|
||||
|
||||
/* 下面等级将使用低功耗监控，1uA消耗 */
|
||||
LPLevel_1V8 = 0x80,
|
||||
LPLevel_1V9,
|
||||
LPLevel_2V0,
|
||||
LPLevel_2V1,
|
||||
LPLevel_2V2,
|
||||
LPLevel_2V3,
|
||||
LPLevel_2V4,
|
||||
LPLevel_2V5,
|
||||
|
||||
} VolM_LevelypeDef;
|
||||
|
||||
/**
|
||||
* @brief 启用内部DC/DC电源，用于节约系统功耗
|
||||
*
|
||||
* @param s - 是否打开DCDC电源
|
||||
*/
|
||||
void PWR_DCDCCfg(FunctionalState s);
|
||||
|
||||
/**
|
||||
* @brief 可控单元模块的电源控制
|
||||
*
|
||||
* @param s - 是否打开电源
|
||||
* @param unit - please refer to unit of controllable power supply
|
||||
*/
|
||||
void PWR_UnitModCfg(FunctionalState s, uint8_t unit);
|
||||
|
||||
/**
|
||||
* @brief 外设时钟控制位
|
||||
*
|
||||
* @param s - 是否打开对应外设时钟
|
||||
* @param perph - please refer to Peripher CLK control bit define
|
||||
*/
|
||||
void PWR_PeriphClkCfg(FunctionalState s, uint16_t perph);
|
||||
|
||||
/**
|
||||
* @brief 睡眠唤醒源配置
|
||||
*
|
||||
* @param s - 是否打开此外设睡眠唤醒功能
|
||||
* @param perph - 需要设置的唤醒源
|
||||
* RB_SLP_USB_WAKE - USB 为唤醒源
|
||||
* RB_SLP_RTC_WAKE - RTC 为唤醒源
|
||||
* RB_SLP_GPIO_WAKE - GPIO 为唤醒源
|
||||
* RB_SLP_BAT_WAKE - BAT 为唤醒源
|
||||
* @param mode - refer to WakeUP_ModeypeDef
|
||||
*/
|
||||
void PWR_PeriphWakeUpCfg(FunctionalState s, uint8_t perph, WakeUP_ModeypeDef mode);
|
||||
|
||||
/**
|
||||
* @brief 电源监控
|
||||
*
|
||||
* @param s - 是否打开此功能
|
||||
* @param vl - refer to VolM_LevelypeDef
|
||||
*/
|
||||
void PowerMonitor(FunctionalState s, VolM_LevelypeDef vl);
|
||||
|
||||
/**
|
||||
* @brief 低功耗-Idle模式
|
||||
*/
|
||||
void LowPower_Idle(void);
|
||||
|
||||
/**
|
||||
* @brief 低功耗-Halt模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||||
*/
|
||||
void LowPower_Halt(void);
|
||||
|
||||
/**
|
||||
* @brief 低功耗-Sleep模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||||
* @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开
|
||||
*
|
||||
* @param rm - 供电模块选择
|
||||
* RB_PWR_RAM2K - 2K retention SRAM 供电
|
||||
* RB_PWR_RAM16K - 16K main SRAM 供电
|
||||
* RB_PWR_EXTEND - USB 和 BLE 单元保留区域供电
|
||||
* RB_PWR_XROM - FlashROM 供电
|
||||
* NULL - 以上单元都断电
|
||||
*/
|
||||
void LowPower_Sleep(uint8_t rm);
|
||||
|
||||
/**
|
||||
* @brief 低功耗-Shutdown模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||||
* @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开
|
||||
*
|
||||
* @param rm - 供电模块选择
|
||||
* RB_PWR_RAM2K - 2K retention SRAM 供电
|
||||
* RB_PWR_RAM16K - 16K main SRAM 供电
|
||||
* NULL - 以上单元都断电
|
||||
*/
|
||||
void LowPower_Shutdown(uint8_t rm);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_PWR_H__
|
||||
209
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_spi.h
Normal file
209
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_spi.h
Normal file
@@ -0,0 +1,209 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_SPI.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_SPI_H__
|
||||
#define __CH58x_SPI_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief SPI0 interrupt bit define
|
||||
*/
|
||||
#define SPI0_IT_FST_BYTE RB_SPI_IE_FST_BYTE // 从机模式的首字节命令模式下，接收到首字节中断
|
||||
#define SPI0_IT_FIFO_OV RB_SPI_IE_FIFO_OV // FIFO 溢出
|
||||
#define SPI0_IT_DMA_END RB_SPI_IE_DMA_END // DMA 传输结束
|
||||
#define SPI0_IT_FIFO_HF RB_SPI_IE_FIFO_HF // FIFO 使用过半
|
||||
#define SPI0_IT_BYTE_END RB_SPI_IE_BYTE_END // 单字节传输完成
|
||||
#define SPI0_IT_CNT_END RB_SPI_IE_CNT_END // 全部字节传输完成
|
||||
|
||||
/**
|
||||
* @brief Configuration data mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Mode0_LowBitINFront = 0, // 模式0，低位在前
|
||||
Mode0_HighBitINFront, // 模式0，高位在前
|
||||
Mode3_LowBitINFront, // 模式3，低位在前
|
||||
Mode3_HighBitINFront, // 模式3，高位在前
|
||||
} ModeBitOrderTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration SPI0 slave mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Mode_DataStream = 0, // 数据流模式
|
||||
Mose_FirstCmd, // 首字节命令模式
|
||||
} Slave_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 主机模式默认初始化：模式0+3线全双工+8MHz
|
||||
*/
|
||||
void SPI0_MasterDefInit(void);
|
||||
|
||||
/**
|
||||
* @brief SPI0 基准时钟配置，= d*Tsys
|
||||
*
|
||||
* @param c - 时钟分频系数
|
||||
*/
|
||||
void SPI0_CLKCfg(uint8_t c);
|
||||
|
||||
/**
|
||||
* @brief 设置数据流模式
|
||||
*
|
||||
* @param m - 数据流模式 refer to ModeBitOrderTypeDef
|
||||
*/
|
||||
void SPI0_DataMode(ModeBitOrderTypeDef m);
|
||||
|
||||
/**
|
||||
* @brief 发送单字节 (buffer)
|
||||
*
|
||||
* @param d - 发送字节
|
||||
*/
|
||||
void SPI0_MasterSendByte(uint8_t d);
|
||||
|
||||
/**
|
||||
* @brief 接收单字节 (buffer)
|
||||
*
|
||||
* @param none
|
||||
*/
|
||||
uint8_t SPI0_MasterRecvByte(void);
|
||||
|
||||
/**
|
||||
* @brief 使用FIFO连续发送多字节
|
||||
*
|
||||
* @param pbuf - 待发送的数据内容首地址
|
||||
* @param len - 请求发送的数据长度，最大4095
|
||||
*/
|
||||
void SPI0_MasterTrans(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief 使用FIFO连续接收多字节
|
||||
*
|
||||
* @param pbuf - 待接收的数据首地址
|
||||
* @param len - 待接收的数据长度，最大4095
|
||||
*/
|
||||
void SPI0_MasterRecv(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief DMA方式连续发送数据
|
||||
*
|
||||
* @param pbuf - 待发送数据起始地址,需要四字节对其
|
||||
* @param len - 待发送数据长度
|
||||
*/
|
||||
void SPI0_MasterDMATrans(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief DMA方式连续接收数据
|
||||
*
|
||||
* @param pbuf - 待接收数据存放起始地址,需要四字节对其
|
||||
* @param len - 待接收数据长度
|
||||
*/
|
||||
void SPI0_MasterDMARecv(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
void SPI1_MasterDefInit(void); /* 主机模式默认初始化：模式0+3线全双工+8MHz */
|
||||
void SPI1_CLKCfg(UINT8 c); /* SPI1 基准时钟配置，= d*Tsys */
|
||||
void SPI1_DataMode(ModeBitOrderTypeDef m); /* 设置数据流模式 */
|
||||
|
||||
void SPI1_MasterSendByte(UINT8 d); /* 发送单字节 (buffer) */
|
||||
UINT8 SPI1_MasterRecvByte(void); /* 接收单字节 (buffer) */
|
||||
|
||||
void SPI1_MasterTrans(UINT8 *pbuf, UINT16 len); /* 使用FIFO连续发送多字节 */
|
||||
void SPI1_MasterRecv(UINT8 *pbuf, UINT16 len); /* 使用FIFO连续接收多字节 */
|
||||
|
||||
/**
|
||||
* @brief 设备模式默认初始化，建议设置MISO的GPIO对应为输入模式
|
||||
*/
|
||||
void SPI0_SlaveInit(void);
|
||||
|
||||
/**
|
||||
* @brief 加载首字节数据内容
|
||||
*
|
||||
* @param d - 首字节数据内容
|
||||
*/
|
||||
#define SetFirstData(d) (R8_SPI0_SLAVE_PRE = d)
|
||||
|
||||
/**
|
||||
* @brief 从机模式，发送一字节数据
|
||||
*
|
||||
* @param d - 待发送数据
|
||||
*/
|
||||
void SPI0_SlaveSendByte(uint8_t d);
|
||||
|
||||
/**
|
||||
* @brief 从机模式，接收一字节数据
|
||||
*
|
||||
* @return 接收到数据
|
||||
*/
|
||||
uint8_t SPI0_SlaveRecvByte(void);
|
||||
|
||||
/**
|
||||
* @brief 从机模式，发送多字节数据
|
||||
*
|
||||
* @param pbuf - 待发送的数据内容首地址
|
||||
* @param len - 请求发送的数据长度，最大4095
|
||||
*/
|
||||
void SPI0_SlaveTrans(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief 从机模式，接收多字节数据
|
||||
*
|
||||
* @param pbuf - 接收收数据存放起始地址
|
||||
* @param len - 请求接收数据长度
|
||||
*/
|
||||
void SPI0_SlaveRecv(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief DMA方式连续发送数据
|
||||
*
|
||||
* @param pbuf - 待发送数据起始地址,需要四字节对其
|
||||
* @param len - 待发送数据长度
|
||||
*/
|
||||
void SPI0_SlaveDMATrans(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief DMA方式连续接收数据
|
||||
*
|
||||
* @param pbuf - 待接收数据存放起始地址,需要四字节对其
|
||||
* @param len - 待接收数据长度
|
||||
*/
|
||||
void SPI0_SlaveDMARecv(uint8_t *pbuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @brief 配置SPI0中断
|
||||
*
|
||||
* @param s - 使能/关闭
|
||||
* @param f - refer to SPI0 interrupt bit define
|
||||
*/
|
||||
#define SPI0_ITCfg(s, f) ((s) ? (R8_SPI0_INTER_EN |= f) : (R8_SPI0_INTER_EN &= ~f))
|
||||
|
||||
/**
|
||||
* @brief 获取中断标志状态，0-未置位，(!0)-触发
|
||||
*
|
||||
* @param f - refer to SPI0 interrupt bit define
|
||||
*/
|
||||
#define SPI0_GetITFlag(f) (R8_SPI0_INT_FLAG & f)
|
||||
|
||||
/**
|
||||
* @brief 清除当前中断标志
|
||||
*
|
||||
* @param f - refer to SPI0 interrupt bit define
|
||||
*/
|
||||
#define SPI0_ClearITFlag(f) (R8_SPI0_INT_FLAG = f)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_SPI_H__
|
||||
194
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_sys.h
Normal file
194
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_sys.h
Normal file
@@ -0,0 +1,194 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_SYS.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_SYS_H__
|
||||
#define __CH58x_SYS_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief rtc interrupt event define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RST_STATUS_SW = 0, // 软件复位
|
||||
RST_STATUS_RPOR, // 上电复位
|
||||
RST_STATUS_WTR, // 看门狗超时复位
|
||||
RST_STATUS_MR, // 外部手动复位
|
||||
RST_STATUS_LRM0, // 唤醒复位-软复位引起
|
||||
RST_STATUS_GPWSM, // 下电模式唤醒复位
|
||||
RST_STATUS_LRM1, // 唤醒复位-看门狗引起
|
||||
RST_STATUS_LRM2, // 唤醒复位-手动复位引起
|
||||
|
||||
} SYS_ResetStaTypeDef;
|
||||
|
||||
/**
|
||||
* @brief rtc interrupt event define
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
INFO_ROM_READ = 0, // FlashROM 代码和数据区 是否可读
|
||||
INFO_RESET_EN = 2, // RST#外部手动复位输入功能是否开启
|
||||
INFO_BOOT_EN, // 系统引导程序 BootLoader 是否开启
|
||||
INFO_DEBUG_EN, // 系统仿真调试接口是否开启
|
||||
INFO_LOADER, // 当前系统是否处于Bootloader 区
|
||||
STA_SAFEACC_ACT, // 当前系统是否处于安全访问状态，否则RWA属性区域不可访问
|
||||
|
||||
} SYS_InfoStaTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 获取芯片ID类，一般为固定值
|
||||
*/
|
||||
#define SYS_GetChipID() R8_CHIP_ID
|
||||
|
||||
/**
|
||||
* @brief 获取安全访问ID，一般为固定值
|
||||
*/
|
||||
#define SYS_GetAccessID() R8_SAFE_ACCESS_ID
|
||||
|
||||
/**
|
||||
* @brief 配置系统运行时钟
|
||||
*
|
||||
* @param sc - 系统时钟源选择 refer to SYS_CLKTypeDef
|
||||
*/
|
||||
void SetSysClock(SYS_CLKTypeDef sc);
|
||||
|
||||
/**
|
||||
* @brief 获取当前系统时钟
|
||||
*
|
||||
* @return Hz
|
||||
*/
|
||||
uint32_t GetSysClock(void);
|
||||
|
||||
/**
|
||||
* @brief 获取当前系统信息状态
|
||||
*
|
||||
* @param i - refer to SYS_InfoStaTypeDef
|
||||
*
|
||||
* @return 是否开启
|
||||
*/
|
||||
uint8_t SYS_GetInfoSta(SYS_InfoStaTypeDef i);
|
||||
|
||||
/**
|
||||
* @brief 获取系统上次复位状态
|
||||
*
|
||||
* @return refer to SYS_ResetStaTypeDef
|
||||
*/
|
||||
#define SYS_GetLastResetSta() (R8_RESET_STATUS & RB_RESET_FLAG)
|
||||
|
||||
/**
|
||||
* @brief 执行系统软件复位
|
||||
*/
|
||||
void SYS_ResetExecute(void);
|
||||
|
||||
/**
|
||||
* @brief 设置复位保存寄存器的值，不受手动复位、 软件复位、 看门狗复位或者普通唤醒复位的影响
|
||||
*
|
||||
* @param i - refer to SYS_InfoStaTypeDef
|
||||
*/
|
||||
#define SYS_ResetKeepBuf(d) (R8_GLOB_RESET_KEEP = d)
|
||||
|
||||
/**
|
||||
* @brief 关闭所有中断，并保留当前中断值
|
||||
*
|
||||
* @param pirqv - 当前保留中断值
|
||||
*/
|
||||
void SYS_DisableAllIrq(uint32_t *pirqv);
|
||||
|
||||
/**
|
||||
* @brief 恢复之前关闭的中断值
|
||||
*
|
||||
* @param irq_status - 当前保留中断值
|
||||
*/
|
||||
void SYS_RecoverIrq(uint32_t irq_status);
|
||||
|
||||
/**
|
||||
* @brief 获取当前系统(SYSTICK)计数值
|
||||
*
|
||||
* @return 当前计数值
|
||||
*/
|
||||
uint32_t SYS_GetSysTickCnt(void);
|
||||
|
||||
/**
|
||||
* @brief 加载看门狗计数初值，递增型
|
||||
*
|
||||
* @param c - 看门狗计数初值
|
||||
*/
|
||||
#define WWDG_SetCounter(c) (R8_WDOG_COUNT = c)
|
||||
|
||||
/**
|
||||
* @brief 看门狗定时器溢出中断使能
|
||||
*
|
||||
* @param s - 溢出是否中断
|
||||
*/
|
||||
void WWDG_ITCfg(FunctionalState s);
|
||||
|
||||
/**
|
||||
* @brief 看门狗定时器复位功能
|
||||
*
|
||||
* @param s - 溢出是否复位
|
||||
*/
|
||||
void WWDG_ResetCfg(FunctionalState s);
|
||||
|
||||
/**
|
||||
* @brief 获取当前看门狗定时器溢出标志
|
||||
*
|
||||
* @return 看门狗定时器溢出标志
|
||||
*/
|
||||
#define WWDG_GetFlowFlag() (R8_RST_WDOG_CTRL & RB_WDOG_INT_FLAG)
|
||||
|
||||
/**
|
||||
* @brief 清除看门狗中断标志，重新加载计数值也可清除
|
||||
*/
|
||||
void WWDG_ClearFlag(void);
|
||||
|
||||
/**
|
||||
* @brief uS 延时
|
||||
*
|
||||
* @param t - 时间参数
|
||||
*/
|
||||
void mDelayuS(uint16_t t);
|
||||
|
||||
/**
|
||||
* @brief mS 延时
|
||||
*
|
||||
* @param t - 时间参数
|
||||
*/
|
||||
void mDelaymS(uint16_t t);
|
||||
|
||||
/**
|
||||
* @brief Enter safe access mode.
|
||||
*
|
||||
* @NOTE: After enter safe access mode, about 16 system frequency cycles
|
||||
* are in safe mode, and one or more secure registers can be rewritten
|
||||
* within the valid period. The safe mode will be automatically
|
||||
* terminated after the above validity period is exceeded.
|
||||
*/
|
||||
__attribute__((always_inline)) static inline void sys_safe_access_enable(void)
|
||||
{
|
||||
R8_SAFE_ACCESS_SIG = SAFE_ACCESS_SIG1;
|
||||
R8_SAFE_ACCESS_SIG = SAFE_ACCESS_SIG2;
|
||||
SAFEOPERATE;
|
||||
}
|
||||
|
||||
__attribute__((always_inline)) static inline void sys_safe_access_disable(void)
|
||||
{
|
||||
R8_SAFE_ACCESS_SIG = 0;
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_SYS_H__
|
||||
555
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_timer.h
Normal file
555
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_timer.h
Normal file
@@ -0,0 +1,555 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_timer.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_TIMER_H__
|
||||
#define __CH58x_TIMER_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define DataBit_25 (1 << 25)
|
||||
|
||||
/**
|
||||
* @brief TMR0 interrupt bit define
|
||||
*/
|
||||
|
||||
#define TMR0_3_IT_CYC_END 0x01 // 周期结束标志：捕捉-超时，定时-周期结束，PWM-周期结束
|
||||
#define TMR0_3_IT_DATA_ACT 0x02 // 数据有效标志：捕捉-新数据，PWM-有效电平结束
|
||||
#define TMR0_3_IT_FIFO_HF 0x04 // FIFO 使用过半：捕捉- FIFO>=4， PWM- FIFO<4
|
||||
#define TMR1_2_IT_DMA_END 0x08 // DMA 结束，支持TMR1和TMR2
|
||||
#define TMR0_3_IT_FIFO_OV 0x10 // FIFO 溢出：捕捉- FIFO满， PWM- FIFO空
|
||||
|
||||
/**
|
||||
* @brief Configuration PWM effective level repeat times
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
PWM_Times_1 = 0, // PWM 有效输出重复1次数
|
||||
PWM_Times_4, // PWM 有效输出重复4次数
|
||||
PWM_Times_8, // PWM 有效输出重复8次数
|
||||
PWM_Times_16, // PWM 有效输出重复16次数
|
||||
} PWM_RepeatTsTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration Cap mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
CAP_NULL = 0, // 不捕捉 & 不计数
|
||||
Edge_To_Edge, // 任意边沿之间 & 计数任意边沿
|
||||
FallEdge_To_FallEdge, // 下降沿到下降沿 & 计数下降沿
|
||||
RiseEdge_To_RiseEdge, // 上升沿到上升沿 & 计数上升沿
|
||||
} CapModeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Configuration DMA mode
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Mode_Single = 0, // 单次模式
|
||||
Mode_LOOP, // 循环模式
|
||||
} DMAModeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 定时功能初始化
|
||||
*
|
||||
* @param t - 定时时间，基于当前系统时钟Tsys, 最长定时周期 67108864
|
||||
*/
|
||||
void TMR0_TimerInit(uint32_t t);
|
||||
|
||||
/**
|
||||
* @brief 获取当前定时器值，最大67108864
|
||||
*
|
||||
* @return 当前定时器值
|
||||
*/
|
||||
#define TMR0_GetCurrentTimer() R32_TMR0_COUNT
|
||||
|
||||
/**
|
||||
* @brief 边沿计数功能初始化
|
||||
*
|
||||
* @param cap - 采集计数类型
|
||||
*/
|
||||
void TMR0_EXTSingleCounterInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 设置计数统计溢出大小，最大67108862
|
||||
*
|
||||
* @param cyc - 计数统计溢出大小
|
||||
*/
|
||||
#define TMR0_CountOverflowCfg(cyc) (R32_TMR0_CNT_END = (cyc + 2))
|
||||
|
||||
/**
|
||||
* @brief 获取当前计数值，最大67108862
|
||||
*
|
||||
* @return 当前计数值
|
||||
*/
|
||||
#define TMR0_GetCurrentCount() R32_TMR0_COUNT
|
||||
|
||||
/**
|
||||
* @brief PWM0 通道输出波形周期配置, 最大67108864
|
||||
*
|
||||
* @param cyc - 输出波形周期
|
||||
*/
|
||||
#define TMR0_PWMCycleCfg(cyc) (R32_TMR0_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief PWM 输出初始化
|
||||
*
|
||||
* @param pr - select wave polar, refer to PWMX_PolarTypeDef
|
||||
* @param ts - set pwm repeat times, refer to PWM_RepeatTsTypeDef
|
||||
*/
|
||||
void TMR0_PWMInit(PWMX_PolarTypeDef pr, PWM_RepeatTsTypeDef ts);
|
||||
|
||||
/**
|
||||
* @brief PWM0 有效数据脉宽, 最大67108864
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define TMR0_PWMActDataWidth(d) (R32_TMR0_FIFO = d)
|
||||
|
||||
/**
|
||||
* @brief CAP0 捕捉电平超时配置, 最大33554432
|
||||
*
|
||||
* @param cyc - 捕捉电平超时
|
||||
*/
|
||||
#define TMR0_CAPTimeoutCfg(cyc) (R32_TMR0_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief 外部信号捕捉功能初始化
|
||||
*
|
||||
* @param cap - select capture mode, refer to CapModeTypeDef
|
||||
*/
|
||||
void TMR0_CapInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 获取脉冲数据
|
||||
*
|
||||
* @return 脉冲数据
|
||||
*/
|
||||
#define TMR0_CAPGetData() R32_TMR0_FIFO
|
||||
|
||||
/**
|
||||
* @brief 获取当前已捕获数据个数
|
||||
*
|
||||
* @return 当前已捕获数据个数
|
||||
*/
|
||||
#define TMR0_CAPDataCounter() R8_TMR0_FIFO_COUNT
|
||||
|
||||
/**
|
||||
* @brief 关闭 TMR0
|
||||
*/
|
||||
#define TMR0_Disable() (R8_TMR0_CTRL_MOD &= ~RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 开启 TMR0
|
||||
*/
|
||||
#define TMR0_Enable() (R8_TMR0_CTRL_MOD |= RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 中断配置
|
||||
*
|
||||
* @param s - 使能/关闭
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR0_ITCfg(s, f) ((s) ? (R8_TMR0_INTER_EN |= f) : (R8_TMR0_INTER_EN &= ~f))
|
||||
|
||||
/**
|
||||
* @brief 清除中断标志
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR0_ClearITFlag(f) (R8_TMR0_INT_FLAG = f)
|
||||
|
||||
/**
|
||||
* @brief 查询中断标志状态
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR0_GetITFlag(f) (R8_TMR0_INT_FLAG & f)
|
||||
|
||||
/**
|
||||
* @brief 定时功能初始化
|
||||
*
|
||||
* @param t - 定时时间，基于当前系统时钟Tsys, 最长定时周期 67108864
|
||||
*/
|
||||
void TMR1_TimerInit(uint32_t t);
|
||||
|
||||
/**
|
||||
* @brief 获取当前定时器值，最大67108864
|
||||
*
|
||||
* @return 当前定时器值
|
||||
*/
|
||||
#define TMR1_GetCurrentTimer() R32_TMR1_COUNT
|
||||
|
||||
/**
|
||||
* @brief 边沿计数功能初始化
|
||||
*
|
||||
* @param cap - 采集计数类型
|
||||
*/
|
||||
void TMR1_EXTSingleCounterInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 设置计数统计溢出大小，最大67108862
|
||||
*
|
||||
* @param cyc - 计数统计溢出大小
|
||||
*/
|
||||
#define TMR1_CountOverflowCfg(cyc) (R32_TMR1_CNT_END = (cyc + 2))
|
||||
|
||||
/**
|
||||
* @brief 获取当前计数值，最大67108862
|
||||
*
|
||||
* @return 当前计数值
|
||||
*/
|
||||
#define TMR1_GetCurrentCount() R32_TMR1_COUNT
|
||||
|
||||
/**
|
||||
* @brief PWM1 通道输出波形周期配置, 最大67108864
|
||||
*
|
||||
* @param cyc - 输出波形周期
|
||||
*/
|
||||
#define TMR1_PWMCycleCfg(cyc) (R32_TMR1_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief PWM 输出初始化
|
||||
*
|
||||
* @param pr - select wave polar, refer to PWMX_PolarTypeDef
|
||||
* @param ts - set pwm repeat times, refer to PWM_RepeatTsTypeDef
|
||||
*/
|
||||
void TMR1_PWMInit(PWMX_PolarTypeDef pr, PWM_RepeatTsTypeDef ts);
|
||||
|
||||
/**
|
||||
* @brief PWM1 有效数据脉宽, 最大67108864
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define TMR1_PWMActDataWidth(d) (R32_TMR1_FIFO = d)
|
||||
|
||||
/**
|
||||
* @brief CAP1 捕捉电平超时配置, 最大33554432
|
||||
*
|
||||
* @param cyc - 捕捉电平超时
|
||||
*/
|
||||
#define TMR1_CAPTimeoutCfg(cyc) (R32_TMR1_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief 外部信号捕捉功能初始化
|
||||
*
|
||||
* @param cap - select capture mode, refer to CapModeTypeDef
|
||||
*/
|
||||
void TMR1_CapInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 获取脉冲数据
|
||||
*
|
||||
* @return 脉冲数据
|
||||
*/
|
||||
#define TMR1_CAPGetData() R32_TMR1_FIFO
|
||||
|
||||
/**
|
||||
* @brief 获取当前已捕获数据个数
|
||||
*
|
||||
* @return 当前已捕获数据个数
|
||||
*/
|
||||
#define TMR1_CAPDataCounter() R8_TMR1_FIFO_COUNT
|
||||
|
||||
/**
|
||||
* @brief 配置DMA功能
|
||||
*
|
||||
* @param s - 是否打开DMA功能
|
||||
* @param startAddr - DMA 起始地址
|
||||
* @param endAddr - DMA 结束地址
|
||||
* @param m - 配置DMA模式
|
||||
*/
|
||||
void TMR1_DMACfg(uint8_t s, uint16_t startAddr, uint16_t endAddr, DMAModeTypeDef m);
|
||||
|
||||
/**
|
||||
* @brief 关闭 TMR1
|
||||
*/
|
||||
#define TMR1_Disable() (R8_TMR1_CTRL_MOD &= ~RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 开启 TMR1
|
||||
*/
|
||||
#define TMR1_Enable() (R8_TMR1_CTRL_MOD |= RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 中断配置
|
||||
*
|
||||
* @param s - 使能/关闭
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR1_ITCfg(s, f) ((s) ? (R8_TMR1_INTER_EN |= f) : (R8_TMR1_INTER_EN &= ~f))
|
||||
|
||||
/**
|
||||
* @brief 清除中断标志
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR1_ClearITFlag(f) (R8_TMR1_INT_FLAG = f)
|
||||
|
||||
/**
|
||||
* @brief 查询中断标志状态
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR1_GetITFlag(f) (R8_TMR1_INT_FLAG & f)
|
||||
|
||||
/**
|
||||
* @brief 定时功能初始化
|
||||
*
|
||||
* @param t - 定时时间，基于当前系统时钟Tsys, 最长定时周期 67108864
|
||||
*/
|
||||
void TMR2_TimerInit(uint32_t t);
|
||||
|
||||
/**
|
||||
* @brief 获取当前定时器值，最大67108864
|
||||
*
|
||||
* @return 当前定时器值
|
||||
*/
|
||||
#define TMR2_GetCurrentTimer() R32_TMR2_COUNT
|
||||
|
||||
/**
|
||||
* @brief 边沿计数功能初始化
|
||||
*
|
||||
* @param cap - 采集计数类型
|
||||
*/
|
||||
void TMR2_EXTSingleCounterInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 设置计数统计溢出大小，最大67108862
|
||||
*
|
||||
* @param cyc - 计数统计溢出大小
|
||||
*/
|
||||
#define TMR2_CountOverflowCfg(cyc) (R32_TMR2_CNT_END = (cyc + 2))
|
||||
|
||||
/**
|
||||
* @brief 获取当前计数值，最大67108862
|
||||
*
|
||||
* @return 当前计数值
|
||||
*/
|
||||
#define TMR2_GetCurrentCount() R32_TMR2_COUNT
|
||||
|
||||
/**
|
||||
* @brief PWM2 通道输出波形周期配置, 最大67108864
|
||||
*
|
||||
* @param cyc - 输出波形周期
|
||||
*/
|
||||
#define TMR2_PWMCycleCfg(cyc) (R32_TMR2_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief PWM 输出初始化
|
||||
*
|
||||
* @param pr - select wave polar, refer to PWMX_PolarTypeDef
|
||||
* @param ts - set pwm repeat times, refer to PWM_RepeatTsTypeDef
|
||||
*/
|
||||
void TMR2_PWMInit(PWMX_PolarTypeDef pr, PWM_RepeatTsTypeDef ts);
|
||||
|
||||
/**
|
||||
* @brief PWM2 有效数据脉宽, 最大67108864
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define TMR2_PWMActDataWidth(d) (R32_TMR2_FIFO = d)
|
||||
|
||||
/**
|
||||
* @brief CAP2 捕捉电平超时配置, 最大33554432
|
||||
*
|
||||
* @param cyc - 捕捉电平超时
|
||||
*/
|
||||
#define TMR2_CAPTimeoutCfg(cyc) (R32_TMR2_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief 外部信号捕捉功能初始化
|
||||
*
|
||||
* @param cap - select capture mode, refer to CapModeTypeDef
|
||||
*/
|
||||
void TMR2_CapInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 获取脉冲数据
|
||||
*
|
||||
* @return 脉冲数据
|
||||
*/
|
||||
#define TMR2_CAPGetData() R32_TMR2_FIFO
|
||||
|
||||
/**
|
||||
* @brief 获取当前已捕获数据个数
|
||||
*
|
||||
* @return 当前已捕获数据个数
|
||||
*/
|
||||
#define TMR2_CAPDataCounter() R8_TMR2_FIFO_COUNT
|
||||
|
||||
/**
|
||||
* @brief 配置DMA功能
|
||||
*
|
||||
* @param s - 是否打开DMA功能
|
||||
* @param startAddr - DMA 起始地址
|
||||
* @param endAddr - DMA 结束地址
|
||||
* @param m - 配置DMA模式
|
||||
*/
|
||||
void TMR2_DMACfg(uint8_t s, uint16_t startAddr, uint16_t endAddr, DMAModeTypeDef m);
|
||||
|
||||
/**
|
||||
* @brief 关闭 TMR2
|
||||
*/
|
||||
#define TMR2_Disable() (R8_TMR2_CTRL_MOD &= ~RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 开启 TMR2
|
||||
*/
|
||||
#define TMR2_Enable() (R8_TMR2_CTRL_MOD |= RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 中断配置
|
||||
*
|
||||
* @param s - 使能/关闭
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR2_ITCfg(s, f) ((s) ? (R8_TMR2_INTER_EN |= f) : (R8_TMR2_INTER_EN &= ~f))
|
||||
|
||||
/**
|
||||
* @brief 清除中断标志
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR2_ClearITFlag(f) (R8_TMR2_INT_FLAG = f)
|
||||
|
||||
/**
|
||||
* @brief 查询中断标志状态
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR2_GetITFlag(f) (R8_TMR2_INT_FLAG & f)
|
||||
|
||||
/**
|
||||
* @brief 定时功能初始化
|
||||
*
|
||||
* @param t - 定时时间，基于当前系统时钟Tsys, 最长定时周期 67108864
|
||||
*/
|
||||
void TMR3_TimerInit(uint32_t t);
|
||||
|
||||
/**
|
||||
* @brief 获取当前定时器值，最大67108864
|
||||
*
|
||||
* @return 当前定时器值
|
||||
*/
|
||||
#define TMR3_GetCurrentTimer() R32_TMR3_COUNT
|
||||
|
||||
/**
|
||||
* @brief 边沿计数功能初始化
|
||||
*
|
||||
* @param cap - 采集计数类型
|
||||
*/
|
||||
void TMR3_EXTSingleCounterInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 设置计数统计溢出大小，最大67108862
|
||||
*
|
||||
* @param cyc - 计数统计溢出大小
|
||||
*/
|
||||
#define TMR3_CountOverflowCfg(cyc) (R32_TMR3_CNT_END = (cyc + 2))
|
||||
|
||||
/**
|
||||
* @brief 获取当前计数值，最大67108862
|
||||
*
|
||||
* @return 当前计数值
|
||||
*/
|
||||
#define TMR3_GetCurrentCount() R32_TMR3_COUNT
|
||||
|
||||
/**
|
||||
* @brief PWM3 通道输出波形周期配置, 最大67108864
|
||||
*
|
||||
* @param cyc - 输出波形周期
|
||||
*/
|
||||
#define TMR3_PWMCycleCfg(cyc) (R32_TMR3_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief PWM 输出初始化
|
||||
*
|
||||
* @param pr - select wave polar, refer to PWMX_PolarTypeDef
|
||||
* @param ts - set pwm repeat times, refer to PWM_RepeatTsTypeDef
|
||||
*/
|
||||
void TMR3_PWMInit(PWMX_PolarTypeDef pr, PWM_RepeatTsTypeDef ts);
|
||||
|
||||
/**
|
||||
* @brief PWM3 有效数据脉宽, 最大67108864
|
||||
*
|
||||
* @param d - 有效数据脉宽
|
||||
*/
|
||||
#define TMR3_PWMActDataWidth(d) (R32_TMR3_FIFO = d)
|
||||
|
||||
/**
|
||||
* @brief CAP3 捕捉电平超时配置, 最大33554432
|
||||
*
|
||||
* @param cyc - 捕捉电平超时
|
||||
*/
|
||||
#define TMR3_CAPTimeoutCfg(cyc) (R32_TMR3_CNT_END = cyc)
|
||||
|
||||
/**
|
||||
* @brief 外部信号捕捉功能初始化
|
||||
*
|
||||
* @param cap - select capture mode, refer to CapModeTypeDef
|
||||
*/
|
||||
void TMR3_CapInit(CapModeTypeDef cap);
|
||||
|
||||
/**
|
||||
* @brief 获取脉冲数据
|
||||
*
|
||||
* @return 脉冲数据
|
||||
*/
|
||||
#define TMR3_CAPGetData() R32_TMR3_FIFO
|
||||
|
||||
/**
|
||||
* @brief 获取当前已捕获数据个数
|
||||
*
|
||||
* @return 当前已捕获数据个数
|
||||
*/
|
||||
#define TMR3_CAPDataCounter() R8_TMR3_FIFO_COUNT
|
||||
|
||||
/**
|
||||
* @brief 关闭 TMR3
|
||||
*/
|
||||
#define TMR3_Disable() (R8_TMR3_CTRL_MOD &= ~RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 开启 TMR3
|
||||
*/
|
||||
#define TMR3_Enable() (R8_TMR3_CTRL_MOD |= RB_TMR_COUNT_EN)
|
||||
|
||||
/**
|
||||
* @brief 中断配置
|
||||
*
|
||||
* @param s - 使能/关闭
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR3_ITCfg(s, f) ((s) ? (R8_TMR3_INTER_EN |= f) : (R8_TMR3_INTER_EN &= ~f))
|
||||
|
||||
/**
|
||||
* @brief 清除中断标志
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR3_ClearITFlag(f) (R8_TMR3_INT_FLAG = f)
|
||||
|
||||
/**
|
||||
* @brief 查询中断标志状态
|
||||
*
|
||||
* @param f - refer to TMR interrupt bit define
|
||||
*/
|
||||
#define TMR3_GetITFlag(f) (R8_TMR3_INT_FLAG & f)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_TIMER_H__
|
||||
412
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_uart.h
Normal file
412
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_uart.h
Normal file
@@ -0,0 +1,412 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_uart.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_UART_H__
|
||||
#define __CH58x_UART_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief LINE error and status define
|
||||
*/
|
||||
#define STA_ERR_BREAK RB_LSR_BREAK_ERR // 数据间隔错误
|
||||
#define STA_ERR_FRAME RB_LSR_FRAME_ERR // 数据帧错误
|
||||
#define STA_ERR_PAR RB_LSR_PAR_ERR // 奇偶校验位出错
|
||||
#define STA_ERR_FIFOOV RB_LSR_OVER_ERR // 接收数据溢出
|
||||
|
||||
#define STA_TXFIFO_EMP RB_LSR_TX_FIFO_EMP // 当前发送FIFO空，可以继续填充发送数据
|
||||
#define STA_TXALL_EMP RB_LSR_TX_ALL_EMP // 当前所有发送数据都发送完成
|
||||
#define STA_RECV_DATA RB_LSR_DATA_RDY // 当前有接收到数据
|
||||
|
||||
/**
|
||||
* @brief Configuration UART TrigByte num
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
UART_1BYTE_TRIG = 0, // 1字节触发
|
||||
UART_2BYTE_TRIG, // 2字节触发
|
||||
UART_4BYTE_TRIG, // 4字节触发
|
||||
UART_7BYTE_TRIG, // 7字节触发
|
||||
|
||||
} UARTByteTRIGTypeDef;
|
||||
|
||||
/**
|
||||
* @brief 串口默认初始化配置
|
||||
*/
|
||||
void UART0_DefInit(void);
|
||||
|
||||
/**
|
||||
* @brief 串口波特率配置
|
||||
*
|
||||
* @param baudrate - 波特率
|
||||
*/
|
||||
void UART0_BaudRateCfg(uint32_t baudrate);
|
||||
|
||||
/**
|
||||
* @brief 串口字节触发中断配置
|
||||
*
|
||||
* @param b - 触发字节数 refer to UARTByteTRIGTypeDef
|
||||
*/
|
||||
void UART0_ByteTrigCfg(UARTByteTRIGTypeDef b);
|
||||
|
||||
/**
|
||||
* @brief 串口中断配置
|
||||
*
|
||||
* @param s - 中断控制状态，是否使能相应中断
|
||||
* @param i - 中断类型
|
||||
* RB_IER_MODEM_CHG - 调制解调器输入状态变化中断使能位（仅 UART0 支持）
|
||||
* RB_IER_LINE_STAT - 接收线路状态中断
|
||||
* RB_IER_THR_EMPTY - 发送保持寄存器空中断
|
||||
* RB_IER_RECV_RDY - 接收数据中断
|
||||
*/
|
||||
void UART0_INTCfg(FunctionalState s, uint8_t i);
|
||||
|
||||
/**
|
||||
* @brief 串口软件复位
|
||||
*/
|
||||
void UART0_Reset(void);
|
||||
|
||||
/**
|
||||
* @brief 清除当前接收FIFO
|
||||
*/
|
||||
#define UART0_CLR_RXFIFO() (R8_UART0_FCR |= RB_FCR_RX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 清除当前发送FIFO
|
||||
*/
|
||||
#define UART0_CLR_TXFIFO() (R8_UART0_FCR |= RB_FCR_TX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 获取当前中断标志
|
||||
*
|
||||
* @return 当前中断标志
|
||||
*/
|
||||
#define UART0_GetITFlag() (R8_UART0_IIR & RB_IIR_INT_MASK)
|
||||
|
||||
/**
|
||||
* @brief 获取当前通讯状态
|
||||
*
|
||||
* @return refer to LINE error and status define
|
||||
*/
|
||||
#define UART0_GetLinSTA() (R8_UART0_LSR)
|
||||
|
||||
/**
|
||||
* @brief 串口单字节发送
|
||||
*
|
||||
* @param b 待发送的字节
|
||||
*/
|
||||
#define UART0_SendByte(b) (R8_UART0_THR = b)
|
||||
|
||||
/**
|
||||
* @brief 串口多字节发送
|
||||
*
|
||||
* @param buf - 待发送的数据内容首地址
|
||||
* @param l - 待发送的数据长度
|
||||
*/
|
||||
void UART0_SendString(uint8_t *buf, uint16_t l);
|
||||
|
||||
/**
|
||||
* @brief 串口读取单字节
|
||||
*
|
||||
* @return 读取到的单字节
|
||||
*/
|
||||
#define UART0_RecvByte() (R8_UART0_RBR)
|
||||
|
||||
/**
|
||||
* @brief 串口读取多字节
|
||||
*
|
||||
* @param buf - 读取数据存放缓存区首地址
|
||||
*
|
||||
* @return 读取数据长度
|
||||
*/
|
||||
uint16_t UART0_RecvString(uint8_t *buf);
|
||||
|
||||
/**
|
||||
* @brief 串口默认初始化配置
|
||||
*/
|
||||
void UART1_DefInit(void);
|
||||
|
||||
/**
|
||||
* @brief 串口波特率配置
|
||||
*
|
||||
* @param baudrate - 波特率
|
||||
*/
|
||||
void UART1_BaudRateCfg(uint32_t baudrate);
|
||||
|
||||
/**
|
||||
* @brief 串口字节触发中断配置
|
||||
*
|
||||
* @param b - 触发字节数 refer to UARTByteTRIGTypeDef
|
||||
*/
|
||||
void UART1_ByteTrigCfg(UARTByteTRIGTypeDef b);
|
||||
|
||||
/**
|
||||
* @brief 串口中断配置
|
||||
*
|
||||
* @param s - 中断控制状态，是否使能相应中断
|
||||
* @param i - 中断类型
|
||||
* RB_IER_MODEM_CHG - 调制解调器输入状态变化中断使能位（仅 UART0 支持）
|
||||
* RB_IER_LINE_STAT - 接收线路状态中断
|
||||
* RB_IER_THR_EMPTY - 发送保持寄存器空中断
|
||||
* RB_IER_RECV_RDY - 接收数据中断
|
||||
*/
|
||||
void UART1_INTCfg(FunctionalState s, uint8_t i);
|
||||
|
||||
/**
|
||||
* @brief 串口软件复位
|
||||
*/
|
||||
void UART1_Reset(void);
|
||||
|
||||
/**
|
||||
* @brief 清除当前接收FIFO
|
||||
*/
|
||||
#define UART1_CLR_RXFIFO() (R8_UART1_FCR |= RB_FCR_RX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 清除当前发送FIFO
|
||||
*/
|
||||
#define UART1_CLR_TXFIFO() (R8_UART1_FCR |= RB_FCR_TX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 获取当前中断标志
|
||||
*
|
||||
* @return 当前中断标志
|
||||
*/
|
||||
#define UART1_GetITFlag() (R8_UART1_IIR & RB_IIR_INT_MASK)
|
||||
|
||||
/**
|
||||
* @brief 获取当前通讯状态
|
||||
*
|
||||
* @return refer to LINE error and status define
|
||||
*/
|
||||
#define UART1_GetLinSTA() (R8_UART1_LSR)
|
||||
|
||||
/**
|
||||
* @brief 串口单字节发送
|
||||
*
|
||||
* @param b 待发送的字节
|
||||
*/
|
||||
#define UART1_SendByte(b) (R8_UART1_THR = b)
|
||||
|
||||
/**
|
||||
* @brief 串口多字节发送
|
||||
*
|
||||
* @param buf - 待发送的数据内容首地址
|
||||
* @param l - 待发送的数据长度
|
||||
*/
|
||||
void UART1_SendString(uint8_t *buf, uint16_t l);
|
||||
|
||||
/**
|
||||
* @brief 串口读取单字节
|
||||
*
|
||||
* @return 读取到的单字节
|
||||
*/
|
||||
#define UART1_RecvByte() (R8_UART1_RBR)
|
||||
|
||||
/**
|
||||
* @brief 串口读取多字节
|
||||
*
|
||||
* @param buf - 读取数据存放缓存区首地址
|
||||
*
|
||||
* @return 读取数据长度
|
||||
*/
|
||||
uint16_t UART1_RecvString(uint8_t *buf);
|
||||
|
||||
/**
|
||||
* @brief 串口默认初始化配置
|
||||
*/
|
||||
void UART2_DefInit(void);
|
||||
|
||||
/**
|
||||
* @brief 串口波特率配置
|
||||
*
|
||||
* @param baudrate - 波特率
|
||||
*/
|
||||
void UART2_BaudRateCfg(uint32_t baudrate);
|
||||
|
||||
/**
|
||||
* @brief 串口字节触发中断配置
|
||||
*
|
||||
* @param b - 触发字节数 refer to UARTByteTRIGTypeDef
|
||||
*/
|
||||
void UART2_ByteTrigCfg(UARTByteTRIGTypeDef b);
|
||||
|
||||
/**
|
||||
* @brief 串口中断配置
|
||||
*
|
||||
* @param s - 中断控制状态，是否使能相应中断
|
||||
* @param i - 中断类型
|
||||
* RB_IER_MODEM_CHG - 调制解调器输入状态变化中断使能位（仅 UART0 支持）
|
||||
* RB_IER_LINE_STAT - 接收线路状态中断
|
||||
* RB_IER_THR_EMPTY - 发送保持寄存器空中断
|
||||
* RB_IER_RECV_RDY - 接收数据中断
|
||||
*/
|
||||
void UART2_INTCfg(FunctionalState s, uint8_t i);
|
||||
|
||||
/**
|
||||
* @brief 串口软件复位
|
||||
*/
|
||||
void UART2_Reset(void);
|
||||
|
||||
/**
|
||||
* @brief 清除当前接收FIFO
|
||||
*/
|
||||
#define UART2_CLR_RXFIFO() (R8_UART2_FCR |= RB_FCR_RX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 清除当前发送FIFO
|
||||
*/
|
||||
#define UART2_CLR_TXFIFO() (R8_UART2_FCR |= RB_FCR_TX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 获取当前中断标志
|
||||
*
|
||||
* @return 当前中断标志
|
||||
*/
|
||||
#define UART2_GetITFlag() (R8_UART2_IIR & RB_IIR_INT_MASK)
|
||||
|
||||
/**
|
||||
* @brief 获取当前通讯状态
|
||||
*
|
||||
* @return refer to LINE error and status define
|
||||
*/
|
||||
#define UART2_GetLinSTA() (R8_UART2_LSR)
|
||||
|
||||
/**
|
||||
* @brief 串口单字节发送
|
||||
*
|
||||
* @param b 待发送的字节
|
||||
*/
|
||||
#define UART2_SendByte(b) (R8_UART2_THR = b)
|
||||
|
||||
/**
|
||||
* @brief 串口多字节发送
|
||||
*
|
||||
* @param buf - 待发送的数据内容首地址
|
||||
* @param l - 待发送的数据长度
|
||||
*/
|
||||
void UART2_SendString(uint8_t *buf, uint16_t l);
|
||||
|
||||
/**
|
||||
* @brief 串口读取单字节
|
||||
*
|
||||
* @return 读取到的单字节
|
||||
*/
|
||||
#define UART2_RecvByte() (R8_UART2_RBR)
|
||||
|
||||
/**
|
||||
* @brief 串口读取多字节
|
||||
*
|
||||
* @param buf - 读取数据存放缓存区首地址
|
||||
*
|
||||
* @return 读取数据长度
|
||||
*/
|
||||
uint16_t UART2_RecvString(uint8_t *buf);
|
||||
|
||||
/**
|
||||
* @brief 串口默认初始化配置
|
||||
*/
|
||||
void UART3_DefInit(void);
|
||||
|
||||
/**
|
||||
* @brief 串口波特率配置
|
||||
*
|
||||
* @param baudrate - 波特率
|
||||
*/
|
||||
void UART3_BaudRateCfg(uint32_t baudrate);
|
||||
|
||||
/**
|
||||
* @brief 串口字节触发中断配置
|
||||
*
|
||||
* @param b - 触发字节数 refer to UARTByteTRIGTypeDef
|
||||
*/
|
||||
void UART3_ByteTrigCfg(UARTByteTRIGTypeDef b);
|
||||
|
||||
/**
|
||||
* @brief 串口中断配置
|
||||
*
|
||||
* @param s - 中断控制状态，是否使能相应中断
|
||||
* @param i - 中断类型
|
||||
* RB_IER_MODEM_CHG - 调制解调器输入状态变化中断使能位（仅 UART0 支持）
|
||||
* RB_IER_LINE_STAT - 接收线路状态中断
|
||||
* RB_IER_THR_EMPTY - 发送保持寄存器空中断
|
||||
* RB_IER_RECV_RDY - 接收数据中断
|
||||
*/
|
||||
void UART3_INTCfg(FunctionalState s, uint8_t i);
|
||||
|
||||
/**
|
||||
* @brief 串口软件复位
|
||||
*/
|
||||
void UART3_Reset(void);
|
||||
|
||||
/**
|
||||
* @brief 清除当前接收FIFO
|
||||
*/
|
||||
#define UART3_CLR_RXFIFO() (R8_UART3_FCR |= RB_FCR_RX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 清除当前发送FIFO
|
||||
*/
|
||||
#define UART3_CLR_TXFIFO() (R8_UART3_FCR |= RB_FCR_TX_FIFO_CLR)
|
||||
|
||||
/**
|
||||
* @brief 获取当前中断标志
|
||||
*
|
||||
* @return 当前中断标志
|
||||
*/
|
||||
#define UART3_GetITFlag() (R8_UART3_IIR & RB_IIR_INT_MASK)
|
||||
|
||||
/**
|
||||
* @brief 获取当前通讯状态
|
||||
*
|
||||
* @return refer to LINE error and status define
|
||||
*/
|
||||
#define UART3_GetLinSTA() (R8_UART3_LSR)
|
||||
|
||||
/**
|
||||
* @brief 串口单字节发送
|
||||
*
|
||||
* @param b 待发送的字节
|
||||
*/
|
||||
#define UART3_SendByte(b) (R8_UART3_THR = b)
|
||||
|
||||
/**
|
||||
* @brief 串口多字节发送
|
||||
*
|
||||
* @param buf - 待发送的数据内容首地址
|
||||
* @param l - 待发送的数据长度
|
||||
*/
|
||||
void UART3_SendString(uint8_t *buf, uint16_t l);
|
||||
|
||||
/**
|
||||
* @brief 串口读取单字节
|
||||
*
|
||||
* @return 读取到的单字节
|
||||
*/
|
||||
#define UART3_RecvByte() (R8_UART3_RBR)
|
||||
|
||||
/**
|
||||
* @brief 串口读取多字节
|
||||
*
|
||||
* @param buf - 读取数据存放缓存区首地址
|
||||
*
|
||||
* @return 读取数据长度
|
||||
*/
|
||||
uint16_t UART3_RecvString(uint8_t *buf);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_UART_H__
|
||||
349
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_usbhost.h
Normal file
349
CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_usbhost.h
Normal file
@@ -0,0 +1,349 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : CH57x_usbhost.h
|
||||
* Author : WCH
|
||||
* Version : V1.2
|
||||
* Date : 2021/11/17
|
||||
* Description
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __CH58x_USBHOST_H__
|
||||
#define __CH58x_USBHOST_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if DISK_LIB_ENABLE
|
||||
#if DISK_WITHOUT_USB_HUB
|
||||
/* 不使用U盘文件系统库或者U盘挂载USBhub下面，需要关闭下面定义 */
|
||||
#define FOR_ROOT_UDISK_ONLY
|
||||
#endif
|
||||
/* 使用U盘文件系统库，需要开启下面定义, 不使用请关闭 */
|
||||
#define DISK_BASE_BUF_LEN 512 /* 默认的磁盘数据缓冲区大小为512字节,建议选择为2048甚至4096以支持某些大扇区的U盘,为0则禁止在.H文件中定义缓冲区并由应用程序在pDISK_BASE_BUF中指定 */
|
||||
#endif
|
||||
|
||||
// 各子程序返回状态码
|
||||
#define ERR_SUCCESS 0x00 // 操作成功
|
||||
#define ERR_USB_CONNECT 0x15 /* 检测到USB设备连接事件,已经连接 */
|
||||
#define ERR_USB_DISCON 0x16 /* 检测到USB设备断开事件,已经断开 */
|
||||
#define ERR_USB_BUF_OVER 0x17 /* USB传输的数据有误或者数据太多缓冲区溢出 */
|
||||
#define ERR_USB_DISK_ERR 0x1F /* USB存储器操作失败,在初始化时可能是USB存储器不支持,在读写操作中可能是磁盘损坏或者已经断开 */
|
||||
#define ERR_USB_TRANSFER 0x20 /* NAK/STALL等更多错误码在0x20~0x2F */
|
||||
#define ERR_USB_UNSUPPORT 0xFB /* 不支持的USB设备*/
|
||||
#define ERR_USB_UNKNOWN 0xFE /* 设备操作出错*/
|
||||
#define ERR_AOA_PROTOCOL 0x41 /* 协议版本出错 */
|
||||
|
||||
/*USB设备相关信息表,最多支持1个设备*/
|
||||
#define ROOT_DEV_DISCONNECT 0
|
||||
#define ROOT_DEV_CONNECTED 1
|
||||
#define ROOT_DEV_FAILED 2
|
||||
#define ROOT_DEV_SUCCESS 3
|
||||
#define DEV_TYPE_KEYBOARD (USB_DEV_CLASS_HID | 0x20)
|
||||
#define DEV_TYPE_MOUSE (USB_DEV_CLASS_HID | 0x30)
|
||||
#define DEF_AOA_DEVICE 0xF0
|
||||
#define DEV_TYPE_UNKNOW 0xFF
|
||||
|
||||
/*
|
||||
约定: USB设备地址分配规则(参考USB_DEVICE_ADDR)
|
||||
地址值 设备位置
|
||||
0x02 内置Root-HUB下的USB设备或外部HUB
|
||||
0x1x 内置Root-HUB下的外部HUB的端口x下的USB设备,x为1~n
|
||||
*/
|
||||
#define HUB_MAX_PORTS 4
|
||||
#define WAIT_USB_TOUT_200US 800 // 等待USB中断超时时间
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t DeviceStatus; // 设备状态,0-无设备,1-有设备但尚未初始化,2-有设备但初始化枚举失败,3-有设备且初始化枚举成功
|
||||
uint8_t DeviceAddress; // 设备被分配的USB地址
|
||||
uint8_t DeviceSpeed; // 0为低速,非0为全速
|
||||
uint8_t DeviceType; // 设备类型
|
||||
uint16_t DeviceVID;
|
||||
uint16_t DevicePID;
|
||||
uint8_t GpVar[4]; // 通用变量，存放端点
|
||||
uint8_t GpHUBPortNum; // 通用变量,如果是HUB，表示HUB端口数
|
||||
} _RootHubDev;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
UINT8 DeviceStatus; // 设备状态,0-无设备,1-有设备但尚未初始化,2-有设备但初始化枚举失败,3-有设备且初始化枚举成功
|
||||
UINT8 DeviceAddress; // 设备被分配的USB地址
|
||||
UINT8 DeviceSpeed; // 0为低速,非0为全速
|
||||
UINT8 DeviceType; // 设备类型
|
||||
UINT16 DeviceVID;
|
||||
UINT16 DevicePID;
|
||||
UINT8 GpVar[4]; // 通用变量
|
||||
} _DevOnHubPort; // 假定:不超过1个外部HUB,每个外部HUB不超过HUB_MAX_PORTS个端口(多了不管)
|
||||
|
||||
extern _RootHubDev ThisUsbDev;
|
||||
extern _DevOnHubPort DevOnHubPort[HUB_MAX_PORTS]; // 假定:不超过1个外部HUB,每个外部HUB不超过HUB_MAX_PORTS个端口(多了不管)
|
||||
extern uint8_t UsbDevEndp0Size; // USB设备的端点0的最大包尺寸 */
|
||||
extern uint8_t FoundNewDev;
|
||||
|
||||
extern uint8_t *pHOST_RX_RAM_Addr;
|
||||
extern uint8_t *pHOST_TX_RAM_Addr;
|
||||
|
||||
extern _RootHubDev ThisUsb2Dev;
|
||||
extern _DevOnHubPort DevOnU2HubPort[HUB_MAX_PORTS]; // 假定:不超过1个外部HUB,每个外部HUB不超过HUB_MAX_PORTS个端口(多了不管)
|
||||
extern uint8_t Usb2DevEndp0Size; // USB设备的端点0的最大包尺寸 */
|
||||
extern uint8_t FoundNewU2Dev;
|
||||
|
||||
extern uint8_t *pU2HOST_RX_RAM_Addr;
|
||||
extern uint8_t *pU2HOST_TX_RAM_Addr;
|
||||
|
||||
#define pSetupReq ((PUSB_SETUP_REQ)pHOST_TX_RAM_Addr)
|
||||
#define pU2SetupReq ((PUSB_SETUP_REQ)pU2HOST_TX_RAM_Addr)
|
||||
extern uint8_t Com_Buffer[];
|
||||
extern uint8_t U2Com_Buffer[];
|
||||
|
||||
/* 以下为USB主机请求包 */
|
||||
extern const uint8_t SetupGetDevDescr[]; // 获取设备描述符*/
|
||||
extern const uint8_t SetupGetCfgDescr[]; // 获取配置描述符*/
|
||||
extern const uint8_t SetupSetUsbAddr[]; // 设置USB地址*/
|
||||
extern const uint8_t SetupSetUsbConfig[]; // 设置USB配置*/
|
||||
extern const uint8_t SetupSetUsbInterface[]; // 设置USB接口配置*/
|
||||
extern const uint8_t SetupClrEndpStall[]; // 清除端点STALL*/
|
||||
|
||||
extern const uint8_t SetupGetU2DevDescr[]; // 获取设备描述符*/
|
||||
extern const uint8_t SetupGetU2CfgDescr[]; // 获取配置描述符*/
|
||||
extern const uint8_t SetupSetUsb2Addr[]; // 设置USB地址*/
|
||||
extern const uint8_t SetupSetUsb2Config[]; // 设置USB配置*/
|
||||
extern const uint8_t SetupSetUsb2Interface[]; // 设置USB接口配置*/
|
||||
extern const uint8_t SetupClrU2EndpStall[]; // 清除端点STALL*/
|
||||
|
||||
/**
|
||||
* @brief 关闭ROOT-HUB端口,实际上硬件已经自动关闭,此处只是清除一些结构状态
|
||||
*/
|
||||
void DisableRootHubPort(void);
|
||||
|
||||
/**
|
||||
* @brief 分析ROOT-HUB状态,处理ROOT-HUB端口的设备插拔事件
|
||||
* 如果设备拔出,函数中调用DisableRootHubPort()函数,将端口关闭,插入事件,置相应端口的状态位
|
||||
*
|
||||
* @return 返回ERR_SUCCESS为没有情况,返回ERR_USB_CONNECT为检测到新连接,返回ERR_USB_DISCON为检测到断开
|
||||
*/
|
||||
uint8_t AnalyzeRootHub(void);
|
||||
|
||||
/**
|
||||
* @brief 设置USB主机当前操作的USB设备地址
|
||||
*
|
||||
* @param addr - USB设备地址
|
||||
*/
|
||||
void SetHostUsbAddr(uint8_t addr);
|
||||
|
||||
/**
|
||||
* @brief 设置当前USB速度
|
||||
*
|
||||
* @param FullSpeed - USB速度
|
||||
*/
|
||||
void SetUsbSpeed(uint8_t FullSpeed);
|
||||
|
||||
/**
|
||||
* @brief 检测到设备后,复位总线,为枚举设备准备,设置为默认为全速
|
||||
*/
|
||||
void ResetRootHubPort(void);
|
||||
|
||||
/**
|
||||
* @brief 使能ROOT-HUB端口,相应的bUH_PORT_EN置1开启端口,设备断开可能导致返回失败
|
||||
*
|
||||
* @return 返回ERR_SUCCESS为检测到新连接,返回ERR_USB_DISCON为无连接
|
||||
*/
|
||||
uint8_t EnableRootHubPort(void);
|
||||
|
||||
/**
|
||||
* @brief 等待USB中断
|
||||
*
|
||||
* @return 返回ERR_SUCCESS 数据接收或者发送成功,返回ERR_USB_UNKNOWN 数据接收或者发送失败
|
||||
*/
|
||||
uint8_t WaitUSB_Interrupt(void);
|
||||
|
||||
/**
|
||||
* @brief 传输事务,输入目的端点地址/PID令牌,同步标志,以20uS为单位的NAK重试总时间(0则不重试,0xFFFF无限重试),返回0成功,超时/出错重试
|
||||
* 本子程序着重于易理解,而在实际应用中,为了提供运行速度,应该对本子程序代码进行优化
|
||||
*
|
||||
* @param endp_pid - 令牌和地址, 高4位是token_pid令牌, 低4位是端点地址
|
||||
* @param tog - 同步标志
|
||||
* @param timeout - 超时时间
|
||||
*
|
||||
* @return ERR_USB_UNKNOWN 超时，可能硬件异常
|
||||
* ERR_USB_DISCON 设备断开
|
||||
* ERR_USB_CONNECT 设备连接
|
||||
* ERR_SUCCESS 传输完成
|
||||
*/
|
||||
uint8_t USBHostTransact(uint8_t endp_pid, uint8_t tog, uint32_t timeout);
|
||||
|
||||
/**
|
||||
* @brief 执行控制传输,8字节请求码在pSetupReq中,DataBuf为可选的收发缓冲区
|
||||
*
|
||||
* @param DataBuf - 如果需要接收和发送数据,那么DataBuf需指向有效缓冲区用于存放后续数据
|
||||
* @param RetLen - 实际成功收发的总长度保存在RetLen指向的字节变量中
|
||||
*
|
||||
* @return ERR_USB_BUF_OVER IN状态阶段出错
|
||||
* ERR_SUCCESS 数据交换成功
|
||||
*/
|
||||
uint8_t HostCtrlTransfer(uint8_t *DataBuf, uint8_t *RetLen);
|
||||
|
||||
/**
|
||||
* @brief 复制控制传输的请求包
|
||||
*
|
||||
* @param pReqPkt - 控制请求包地址
|
||||
*/
|
||||
void CopySetupReqPkg(const uint8_t *pReqPkt);
|
||||
|
||||
/**
|
||||
* @brief 获取设备描述符,返回在 pHOST_TX_RAM_Addr 中
|
||||
*
|
||||
* @return ERR_USB_BUF_OVER 描述符长度错误
|
||||
* ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlGetDeviceDescr(void);
|
||||
|
||||
/**
|
||||
* @brief 获取配置描述符,返回在 pHOST_TX_RAM_Addr 中
|
||||
*
|
||||
* @return ERR_USB_BUF_OVER 描述符长度错误
|
||||
* ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlGetConfigDescr(void);
|
||||
|
||||
/**
|
||||
* @brief 设置USB设备地址
|
||||
*
|
||||
* @param addr - 设备地址
|
||||
*
|
||||
* @return ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlSetUsbAddress(uint8_t addr);
|
||||
|
||||
/**
|
||||
* @brief 设置USB设备配置
|
||||
*
|
||||
* @param cfg - 配置值
|
||||
*
|
||||
* @return ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlSetUsbConfig(uint8_t cfg);
|
||||
|
||||
/**
|
||||
* @brief 清除端点STALL
|
||||
*
|
||||
* @param endp - 端点地址
|
||||
*
|
||||
* @return ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlClearEndpStall(uint8_t endp);
|
||||
|
||||
/**
|
||||
* @brief 设置USB设备接口
|
||||
*
|
||||
* @param cfg - 配置值
|
||||
*
|
||||
* @return ERR_SUCCESS 成功
|
||||
*/
|
||||
uint8_t CtrlSetUsbIntercace(uint8_t cfg);
|
||||
|
||||
/**
|
||||
* @brief USB主机功能初始化
|
||||
*/
|
||||
void USB_HostInit(void);
|
||||
uint8_t EnumAllHubPort(void);// 枚举所有ROOT-HUB端口下外部HUB后的二级USB设备
|
||||
void SelectHubPort(uint8_t HubPortIndex); // HubPortIndex=0选择操作指定的ROOT-HUB端口,否则选择操作指定的ROOT-HUB端口的外部HUB的指定端口
|
||||
uint16_t SearchTypeDevice(uint8_t type); // 在ROOT-HUB以及外部HUB各端口上搜索指定类型的设备所在的端口号,输出端口号为0xFFFF则未搜索到.
|
||||
uint8_t SETorOFFNumLock(uint8_t *buf); // NumLock的点灯判断
|
||||
|
||||
void DisableRootU2HubPort(void); // 关闭ROOT-U2HUB端口,实际上硬件已经自动关闭,此处只是清除一些结构状态
|
||||
uint8_t AnalyzeRootU2Hub(void); // 分析ROOT-U2HUB状态,处理ROOT-U2HUB端口的设备插拔事件
|
||||
// 返回ERR_SUCCESS为没有情况,返回ERR_USB_CONNECT为检测到新连接,返回ERR_USB_DISCON为检测到断开
|
||||
void SetHostUsb2Addr(uint8_t addr); // 设置USB主机当前操作的USB设备地址
|
||||
void SetUsb2Speed(uint8_t FullSpeed); // 设置当前USB速度
|
||||
void ResetRootU2HubPort(void); // 检测到设备后,复位相应端口的总线,为枚举设备准备,设置为默认为全速
|
||||
uint8_t EnableRootU2HubPort(void); // 使能ROOT-HUB端口,相应的bUH_PORT_EN置1开启端口,设备断开可能导致返回失败
|
||||
void SelectU2HubPort(uint8_t HubPortIndex); // HubPortIndex=0选择操作指定的ROOT-HUB端口,否则选择操作指定的ROOT-HUB端口的外部HUB的指定端口
|
||||
uint8_t WaitUSB2_Interrupt(void); // 等待USB中断
|
||||
// 传输事务,输入目的端点地址/PID令牌,同步标志,以20uS为单位的NAK重试总时间(0则不重试,0xFFFF无限重试),返回0成功,超时/出错重试
|
||||
uint8_t USB2HostTransact(uint8_t endp_pid, uint8_t tog, UINT32 timeout); // endp_pid: 高4位是token_pid令牌, 低4位是端点地址
|
||||
uint8_t U2HostCtrlTransfer(uint8_t *DataBuf, uint8_t *RetLen); // 执行控制传输,8字节请求码在pSetupReq中,DataBuf为可选的收发缓冲区
|
||||
// 如果需要接收和发送数据,那么DataBuf需指向有效缓冲区用于存放后续数据,实际成功收发的总长度返回保存在ReqLen指向的字节变量中
|
||||
|
||||
void CopyU2SetupReqPkg(const uint8_t *pReqPkt); // 复制控制传输的请求包
|
||||
uint8_t CtrlGetU2DeviceDescr(void); // 获取设备描述符,返回在 pHOST_TX_RAM_Addr 中
|
||||
uint8_t CtrlGetU2ConfigDescr(void); // 获取配置描述符,返回在 pHOST_TX_RAM_Addr 中
|
||||
uint8_t CtrlSetUsb2Address(uint8_t addr); // 设置USB设备地址
|
||||
uint8_t CtrlSetUsb2Config(uint8_t cfg); // 设置USB设备配置
|
||||
uint8_t CtrlClearU2EndpStall(uint8_t endp); // 清除端点STALL
|
||||
uint8_t CtrlSetUsb2Intercace(uint8_t cfg); // 设置USB设备接口
|
||||
|
||||
void USB2_HostInit(void); // 初始化USB主机
|
||||
|
||||
/*************************************************************/
|
||||
|
||||
/**
|
||||
* @brief 初始化指定ROOT-HUB端口的USB设备
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t InitRootDevice(void);
|
||||
|
||||
/**
|
||||
* @brief 获取HID设备报表描述符,返回在TxBuffer中
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t CtrlGetHIDDeviceReport(uint8_t infc);
|
||||
|
||||
/**
|
||||
* @brief 获取HUB描述符,返回在Com_Buffer中
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t CtrlGetHubDescr(void);
|
||||
|
||||
/**
|
||||
* @brief 查询HUB端口状态,返回在Com_Buffer中
|
||||
*
|
||||
* @param HubPortIndex - 端口号
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t HubGetPortStatus(uint8_t HubPortIndex);
|
||||
|
||||
/**
|
||||
* @brief 设置HUB端口特性
|
||||
*
|
||||
* @param HubPortIndex - 端口号
|
||||
* @param FeatureSelt - 端口特性
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t HubSetPortFeature(uint8_t HubPortIndex, uint8_t FeatureSelt);
|
||||
|
||||
/**
|
||||
* @brief 清除HUB端口特性
|
||||
*
|
||||
* @param HubPortIndex - 端口号
|
||||
* @param FeatureSelt - 端口特性
|
||||
*
|
||||
* @return 错误码
|
||||
*/
|
||||
uint8_t HubClearPortFeature(uint8_t HubPortIndex, uint8_t FeatureSelt);
|
||||
|
||||
uint8_t InitRootU2Device(void);
|
||||
uint8_t EnumAllU2HubPort(void);
|
||||
uint16_t U2SearchTypeDevice(uint8_t type);
|
||||
uint8_t U2SETorOFFNumLock(uint8_t *buf);
|
||||
|
||||
uint8_t CtrlGetU2HIDDeviceReport(uint8_t infc); // HID类命令，SET_IDLE和GET_REPORT
|
||||
uint8_t CtrlGetU2HubDescr(void); // 获取HUB描述符,返回在TxBuffer中
|
||||
uint8_t U2HubGetPortStatus(uint8_t HubPortIndex); // 查询HUB端口状态,返回在TxBuffer中
|
||||
uint8_t U2HubSetPortFeature(uint8_t HubPortIndex, uint8_t FeatureSelt); // 设置HUB端口特性
|
||||
uint8_t U2HubClearPortFeature(uint8_t HubPortIndex, uint8_t FeatureSelt); // 清除HUB端口特性
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __CH58x_USBHOST_H__
|
||||
190
CH5xx_ble_firmware_library/StdPeriphDriver/inc/ISP583.h
Normal file
190
CH5xx_ble_firmware_library/StdPeriphDriver/inc/ISP583.h
Normal file
@@ -0,0 +1,190 @@
|
||||
/* CH583 Flash-ROM & Data-Flash */
|
||||
/* Website: http://wch.cn */
|
||||
/* Email: tech@wch.cn */
|
||||
/* Author: W.ch 2020.06 */
|
||||
/* V1.0 FlashROM library for USER/BOOT */
|
||||
/* for the target in USER code area on the chip divided into USER code area and BOOT area */
|
||||
/* 用于具有用户代码区和引导区的芯片、操作目标为用户代码区的情况，
|
||||
可以在用户代码中被调用（IAP，擦写自身），也可以在引导代码中被调用（更新用户代码） */
|
||||
|
||||
/* Flash-ROM feature:
|
||||
for store program code, support block erasing, dword and page writing, dword verifying, unit for Length is byte,
|
||||
minimal quantity for write or verify is one dword (4-bytes),
|
||||
256 bytes/page for writing, FLASH_ROM_WRITE support one dword or more dword writing, but multiple of 256 is the best,
|
||||
4KB (4096 bytes) bytes/block for erasing, so multiple of 4096 is the best */
|
||||
|
||||
/* Data-Flash(EEPROM) feature:
|
||||
for store data, support block erasing, byte and page writing, byte reading,
|
||||
minimal quantity for write or read is one byte,
|
||||
256 bytes/page for writing, EEPROM_WRITE support one byte or more byte writing, but multiple of 256 is the best,
|
||||
0.25KB/4KB (256/4096 bytes) bytes/block for erasing, so multiple of 256 or 4096 is the best */
|
||||
|
||||
|
||||
#ifndef EEPROM_PAGE_SIZE
|
||||
#define EEPROM_PAGE_SIZE 256 // Flash-ROM & Data-Flash page size for writing
|
||||
#define EEPROM_BLOCK_SIZE 4096 // Flash-ROM & Data-Flash block size for erasing
|
||||
#define EEPROM_MIN_ER_SIZE EEPROM_PAGE_SIZE // Data-Flash minimal size for erasing
|
||||
//#define EEPROM_MIN_ER_SIZE EEPROM_BLOCK_SIZE // Flash-ROM minimal size for erasing
|
||||
#define EEPROM_MIN_WR_SIZE 1 // Data-Flash minimal size for writing
|
||||
#define EEPROM_MAX_SIZE 0x8000 // Data-Flash maximum size, 32KB
|
||||
#endif
|
||||
#ifndef FLASH_MIN_WR_SIZE
|
||||
#define FLASH_MIN_WR_SIZE 4 // Flash-ROM minimal size for writing
|
||||
#endif
|
||||
#ifndef FLASH_ROM_MAX_SIZE
|
||||
#define FLASH_ROM_MAX_SIZE 0x070000 // Flash-ROM maximum program size, 448KB
|
||||
#endif
|
||||
|
||||
#ifndef CMD_FLASH_ROM_SW_RESET
|
||||
// CMD_* for caller from FlashROM or RAM, auto execute CMD_FLASH_ROM_SW_RESET before command
|
||||
|
||||
#define CMD_FLASH_ROM_START_IO 0x00 // start FlashROM I/O, without parameter
|
||||
#define CMD_FLASH_ROM_SW_RESET 0x04 // software reset FlashROM, without parameter
|
||||
#define CMD_GET_ROM_INFO 0x06 // get information from FlashROM, parameter @Address,Buffer
|
||||
#define CMD_GET_UNIQUE_ID 0x07 // get 64 bit unique ID, parameter @Buffer
|
||||
#define CMD_FLASH_ROM_PWR_DOWN 0x0D // power-down FlashROM, without parameter
|
||||
#define CMD_FLASH_ROM_PWR_UP 0x0C // power-up FlashROM, without parameter
|
||||
#define CMD_FLASH_ROM_LOCK 0x08 // lock(protect)/unlock FlashROM data block, return 0 if success, parameter @StartAddr
|
||||
// StartAddr: 0=unlock all, 1=lock boot code, 3=lock all code and data
|
||||
|
||||
#define CMD_EEPROM_ERASE 0x09 // erase Data-Flash block, return 0 if success, parameter @StartAddr,Length
|
||||
#define CMD_EEPROM_WRITE 0x0A // write Data-Flash data block, return 0 if success, parameter @StartAddr,Buffer,Length
|
||||
#define CMD_EEPROM_READ 0x0B // read Data-Flash data block, parameter @StartAddr,Buffer,Length
|
||||
#define CMD_FLASH_ROM_ERASE 0x01 // erase FlashROM block, return 0 if success, parameter @StartAddr,Length
|
||||
#define CMD_FLASH_ROM_WRITE 0x02 // write FlashROM data block, minimal block is dword, return 0 if success, parameter @StartAddr,Buffer,Length
|
||||
#define CMD_FLASH_ROM_VERIFY 0x03 // read FlashROM data block, minimal block is dword, return 0 if success, parameter @StartAddr,Buffer,Length
|
||||
#endif
|
||||
|
||||
#define ROM_CFG_MAC_ADDR 0x7F018 // address for MAC address information
|
||||
#define ROM_CFG_BOOT_INFO 0x7DFF8 // address for BOOT information
|
||||
|
||||
/**
|
||||
* @brief execute Flash/EEPROM command, caller from FlashROM or RAM
|
||||
*
|
||||
* @param cmd - CMD_* for caller from FlashROM or RAM.
|
||||
* @param StartAddr - Address of the data to be process.
|
||||
* @param Buffer - Pointer to the buffer where data should be process, Must be aligned to 4 bytes.
|
||||
* @param Length - Size of data to be process, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
extern uint32_t FLASH_EEPROM_CMD( uint8_t cmd, uint32_t StartAddr, void *Buffer, uint32_t Length );
|
||||
|
||||
/**
|
||||
* @brief start FlashROM I/O
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_START_IO( ) FLASH_EEPROM_CMD( CMD_FLASH_ROM_START_IO, 0, NULL, 0 )
|
||||
|
||||
/**
|
||||
* @brief software reset FlashROM
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_SW_RESET( ) FLASH_EEPROM_CMD( CMD_FLASH_ROM_SW_RESET, 0, NULL, 0 )
|
||||
|
||||
/**
|
||||
* @brief get 6 bytes MAC address
|
||||
*
|
||||
* @param Buffer - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define GetMACAddress(Buffer) FLASH_EEPROM_CMD( CMD_GET_ROM_INFO, ROM_CFG_MAC_ADDR, Buffer, 0 )
|
||||
|
||||
/**
|
||||
* @brief get 8 bytes BOOT information
|
||||
*
|
||||
* @param Buffer - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define GET_BOOT_INFO(Buffer) FLASH_EEPROM_CMD( CMD_GET_ROM_INFO, ROM_CFG_BOOT_INFO, Buffer, 0 )
|
||||
|
||||
/**
|
||||
* @brief get 64 bit unique ID
|
||||
*
|
||||
* @param Buffer - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define GET_UNIQUE_ID(Buffer) FLASH_EEPROM_CMD( CMD_GET_UNIQUE_ID, 0, Buffer, 0 )
|
||||
|
||||
/**
|
||||
* @brief power-down FlashROM
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_PWR_DOWN( ) FLASH_EEPROM_CMD( CMD_FLASH_ROM_PWR_DOWN, 0, NULL, 0 )
|
||||
|
||||
/**
|
||||
* @brief power-up FlashROM
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_PWR_UP( ) FLASH_EEPROM_CMD( CMD_FLASH_ROM_PWR_UP, 0, NULL, 0 )
|
||||
|
||||
/**
|
||||
* @brief read Data-Flash data block
|
||||
*
|
||||
* @param StartAddr - Address of the data to be read.
|
||||
* @param Buffer - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.
|
||||
* @param Length - Size of data to be read, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define EEPROM_READ(StartAddr,Buffer,Length) FLASH_EEPROM_CMD( CMD_EEPROM_READ, StartAddr, Buffer, Length )
|
||||
|
||||
/**
|
||||
*
|
||||
* @param StartAddr - Address of the data to be erased.
|
||||
* @param Length - Size of data to be erased, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define EEPROM_ERASE(StartAddr,Length) FLASH_EEPROM_CMD( CMD_EEPROM_ERASE, StartAddr, NULL, Length )
|
||||
|
||||
/**
|
||||
* @brief write Data-Flash data block
|
||||
*
|
||||
* @param StartAddr - Address of the data to be written.
|
||||
* @param Buffer - Pointer to the source buffer, Must be aligned to 4 bytes.
|
||||
* @param Length - Size of data to be written, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define EEPROM_WRITE(StartAddr,Buffer,Length) FLASH_EEPROM_CMD( CMD_EEPROM_WRITE, StartAddr, Buffer, Length )
|
||||
|
||||
/**
|
||||
* @brief erase FlashROM block
|
||||
*
|
||||
* @param StartAddr - Address of the data to be erased.
|
||||
* @param Length - Size of data to be erased, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_ERASE(StartAddr,Length) FLASH_EEPROM_CMD( CMD_FLASH_ROM_ERASE, StartAddr, NULL, Length )
|
||||
|
||||
/**
|
||||
* @brief write FlashROM data block, minimal block is dword.
|
||||
*
|
||||
* @param StartAddr - Address of the data to be written.
|
||||
* @param Buffer - Pointer to the source buffer, Must be aligned to 4 bytes.
|
||||
* @param Length - Size of data to be written, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_WRITE(StartAddr,Buffer,Length) FLASH_EEPROM_CMD( CMD_FLASH_ROM_WRITE, StartAddr, Buffer, Length )
|
||||
|
||||
/**
|
||||
* @brief verify FlashROM data block, minimal block is dword.
|
||||
*
|
||||
* @param StartAddr - Address of the data to verify.
|
||||
* @param Buffer - Pointer to the source buffer, Must be aligned to 4 bytes.
|
||||
* @param Length - Size of data to verify, in bytes.
|
||||
*
|
||||
* @return 0-SUCCESS (!0)-FAILURE
|
||||
*/
|
||||
#define FLASH_ROM_VERIFY(StartAddr,Buffer,Length) FLASH_EEPROM_CMD( CMD_FLASH_ROM_VERIFY, StartAddr, Buffer, Length )
|
||||
|
||||
Reference in New Issue
Block a user