+ In order to connect an app to your storage account, give it your address:
-
-
+
+
disabled="disabled"
data-clipboard-target="source" />
diff --git a/bin/rails b/bin/rails
index 5badb2f..efc0377 100755
--- a/bin/rails
+++ b/bin/rails
@@ -1,9 +1,4 @@
#!/usr/bin/env ruby
-begin
- load File.expand_path('../spring', __FILE__)
-rescue LoadError => e
- raise unless e.message.include?('spring')
-end
-APP_PATH = File.expand_path('../config/application', __dir__)
-require_relative '../config/boot'
-require 'rails/commands'
+APP_PATH = File.expand_path("../config/application", __dir__)
+require_relative "../config/boot"
+require "rails/commands"
diff --git a/bin/rake b/bin/rake
index d87d5f5..4fbf10b 100755
--- a/bin/rake
+++ b/bin/rake
@@ -1,9 +1,4 @@
#!/usr/bin/env ruby
-begin
- load File.expand_path('../spring', __FILE__)
-rescue LoadError => e
- raise unless e.message.include?('spring')
-end
-require_relative '../config/boot'
-require 'rake'
+require_relative "../config/boot"
+require "rake"
Rake.application.run
diff --git a/bin/rubocop b/bin/rubocop
new file mode 100755
index 0000000..40330c0
--- /dev/null
+++ b/bin/rubocop
@@ -0,0 +1,8 @@
+#!/usr/bin/env ruby
+require "rubygems"
+require "bundler/setup"
+
+# explicit rubocop config increases performance slightly while avoiding config confusion.
+ARGV.unshift("--config", File.expand_path("../.rubocop.yml", __dir__))
+
+load Gem.bin_path("rubocop", "rubocop")
diff --git a/bin/setup b/bin/setup
index 5853b5e..c1d36bc 100755
--- a/bin/setup
+++ b/bin/setup
@@ -1,36 +1,37 @@
#!/usr/bin/env ruby
-require 'fileutils'
+require "fileutils"
-# path to your application root.
-APP_ROOT = File.expand_path('..', __dir__)
+APP_ROOT = File.expand_path("..", __dir__)
+APP_NAME = "akkounts"
def system!(*args)
- system(*args) || abort("\n== Command #{args} failed ==")
+ system(*args, exception: true)
end
FileUtils.chdir APP_ROOT do
- # This script is a way to setup or update your development environment automatically.
- # This script is idempotent, so that you can run it at anytime and get an expectable outcome.
+ # This script is a way to set up or update your development environment automatically.
+ # This script is idempotent, so that you can run it at any time and get an expectable outcome.
# Add necessary setup steps to this file.
- puts '== Installing dependencies =='
- system! 'gem install bundler --conservative'
- system('bundle check') || system!('bundle install')
-
- # Install JavaScript dependencies
- # system('bin/yarn')
+ puts "== Installing dependencies =="
+ system! "gem install bundler --conservative"
+ system("bundle check") || system!("bundle install")
# puts "\n== Copying sample files =="
- # unless File.exist?('config/database.yml')
- # FileUtils.cp 'config/database.yml.sample', 'config/database.yml'
+ # unless File.exist?("config/database.yml")
+ # FileUtils.cp "config/database.yml.sample", "config/database.yml"
# end
puts "\n== Preparing database =="
- system! 'bin/rails db:prepare'
+ system! "bin/rails db:prepare"
puts "\n== Removing old logs and tempfiles =="
- system! 'bin/rails log:clear tmp:clear'
+ system! "bin/rails log:clear tmp:clear"
puts "\n== Restarting application server =="
- system! 'bin/rails restart'
+ system! "bin/rails restart"
+
+ # puts "\n== Configuring puma-dev =="
+ # system "ln -nfs #{APP_ROOT} ~/.puma-dev/#{APP_NAME}"
+ # system "curl -Is https://#{APP_NAME}.test/up | head -n 1"
end
diff --git a/config/application.rb b/config/application.rb
index 89d054a..0b9110f 100644
--- a/config/application.rb
+++ b/config/application.rb
@@ -1,4 +1,4 @@
-require_relative 'boot'
+require_relative "boot"
require "rails"
# Pick the frameworks you want:
@@ -12,7 +12,6 @@ require "action_mailbox/engine"
# require "action_text/engine"
require "action_view/railtie"
require "action_cable/engine"
-require "sprockets/railtie"
# require "rails/test_unit/railtie"
# Require the gems listed in Gemfile, including any gems
@@ -22,12 +21,20 @@ Bundler.require(*Rails.groups)
module Akkounts
class Application < Rails::Application
# Initialize configuration defaults for originally generated Rails version.
- config.load_defaults 7.0
+ config.load_defaults 7.2
- # Settings in config/environments/* take precedence over those specified here.
- # Application configuration can go into files in config/initializers
- # -- all .rb files in that directory are automatically loaded after loading
- # the framework and any gems in your application.
+ # Please, add to the `ignore` list any other `lib` subdirectories that do
+ # not contain `.rb` files, or that should not be reloaded or eager loaded.
+ # Common ones are `templates`, `generators`, or `middleware`, for example.
+ config.autoload_lib(ignore: %w[assets tasks])
+
+ # Configuration for the application, engines, and railties goes here.
+ #
+ # These settings can be overridden in specific environments using the files
+ # in config/environments, which are processed later.
+ #
+ # config.time_zone = "Central Time (US & Canada)"
+ # config.eager_load_paths << Rails.root.join("extras")
# Don't generate system test files.
config.generators.system_tests = nil
@@ -41,6 +48,10 @@ module Akkounts
end
config.active_job.queue_adapter = :sidekiq
+
config.action_mailer.deliver_later_queue_name = nil # use "default" queue
+
+ # The default includes webp, which requires webp support everywhere
+ config.active_storage.web_image_content_types = %w[image/png image/jpeg image/gif]
end
end
diff --git a/config/environment.rb b/config/environment.rb
index 426333b..cac5315 100644
--- a/config/environment.rb
+++ b/config/environment.rb
@@ -1,5 +1,5 @@
# Load the Rails application.
-require_relative 'application'
+require_relative "application"
# Initialize the Rails application.
Rails.application.initialize!
diff --git a/config/environments/development.rb b/config/environments/development.rb
index a5b46ac..58f164d 100644
--- a/config/environments/development.rb
+++ b/config/environments/development.rb
@@ -1,10 +1,12 @@
+require "active_support/core_ext/integer/time"
+
Rails.application.configure do
# Settings specified here will take precedence over those in config/application.rb.
- # In the development environment your application's code is reloaded on
- # every request. This slows down response time but is perfect for development
+ # In the development environment your application's code is reloaded any time
+ # it changes. This slows down response time but is perfect for development
# since you don't have to restart the web server when you make code changes.
- config.cache_classes = false
+ config.enable_reloading = true
# Do not eager load code on boot.
config.eager_load = false
@@ -12,16 +14,17 @@ Rails.application.configure do
# Show full error reports.
config.consider_all_requests_local = true
+ # Enable server timing.
+ config.server_timing = true
+
# Enable/disable caching. By default caching is disabled.
# Run rails dev:cache to toggle caching.
- if Rails.root.join('tmp', 'caching-dev.txt').exist?
+ if Rails.root.join("tmp/caching-dev.txt").exist?
config.action_controller.perform_caching = true
config.action_controller.enable_fragment_cache_logging = true
config.cache_store = :memory_store
- config.public_file_server.headers = {
- 'Cache-Control' => "public, max-age=#{2.days.to_i}"
- }
+ config.public_file_server.headers = { "Cache-Control" => "public, max-age=#{2.days.to_i}" }
else
config.action_controller.perform_caching = false
@@ -31,41 +34,51 @@ Rails.application.configure do
# Don't care if the mailer can't send.
config.action_mailer.raise_delivery_errors = false
+ # Disable caching for Action Mailer templates even if Action Controller
+ # caching is enabled.
config.action_mailer.perform_caching = false
# Print deprecation notices to the Rails logger.
config.active_support.deprecation = :log
+ # Raise exceptions for disallowed deprecations.
+ config.active_support.disallowed_deprecation = :raise
+
+ # Tell Active Support which deprecation messages to disallow.
+ config.active_support.disallowed_deprecation_warnings = []
+
# Raise an error on page load if there are pending migrations.
config.active_record.migration_error = :page_load
# Highlight code that triggered database queries in logs.
config.active_record.verbose_query_logs = true
- # Debug mode disables concatenation and preprocessing of assets.
- # This option may cause significant delays in view rendering with a large
- # number of complex assets.
- config.assets.debug = true
+ # Highlight code that enqueued background job in logs.
+ config.active_job.verbose_enqueue_logs = true
# Suppress logger output for asset requests.
config.assets.quiet = true
# Raises error for missing translations.
- # config.action_view.raise_on_missing_translations = true
+ # config.i18n.raise_on_missing_translations = true
- # Use an evented file watcher to asynchronously detect changes in source code,
- # routes, locales, etc. This feature depends on the listen gem.
- config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+ # Annotate rendered view with file names.
+ config.action_view.annotate_rendered_view_with_filenames = true
# Don't actually send emails, cache them for viewing via letter opener
config.action_mailer.delivery_method = :letter_opener
+ # Uncomment if you wish to allow Action Cable access from any origin.
+ # config.action_cable.disable_request_forgery_protection = true
- # Don't care if the mailer can't send
+ # Raise error when a before_action's only/except options reference missing actions.
+ config.action_controller.raise_on_missing_callback_actions = true
+
+ # Notice if the mailer can't send
config.action_mailer.raise_delivery_errors = true
# Base URL to be used by email template link helpers
config.action_mailer.default_url_options = {
- host: "localhost:3000",
+ host: "localhost:3000", # TODO port: 3000
protocol: "http"
}
diff --git a/config/environments/production.rb b/config/environments/production.rb
index da0fa6f..6a8fa47 100644
--- a/config/environments/production.rb
+++ b/config/environments/production.rb
@@ -1,8 +1,10 @@
+require "active_support/core_ext/integer/time"
+
Rails.application.configure do
# Settings specified here will take precedence over those in config/application.rb.
# Code is not reloaded between requests.
- config.cache_classes = true
+ config.enable_reloading = false
# Eager load code on boot. This eager loads most of Rails and
# your application in memory, allowing both threaded web servers
@@ -11,11 +13,11 @@ Rails.application.configure do
config.eager_load = true
# Full error reports are disabled and caching is turned on.
- config.consider_all_requests_local = false
+ config.consider_all_requests_local = false
config.action_controller.perform_caching = true
- # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
- # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+ # Ensures that a master key has been made available in ENV["RAILS_MASTER_KEY"], config/master.key, or an environment
+ # key such as config/credentials/production.key. This key is used to decrypt credentials (and other encrypted files).
# config.require_master_key = true
# Disable serving static files from the `/public` folder by default since
@@ -29,32 +31,47 @@ Rails.application.configure do
config.assets.compile = false
# Enable serving of images, stylesheets, and JavaScripts from an asset server.
- # config.action_controller.asset_host = 'http://assets.example.com'
+ # config.asset_host = "http://assets.example.com"
# Specifies the header that your server uses for sending files.
- # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
- # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+ # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for Apache
+ # config.action_dispatch.x_sendfile_header = "X-Accel-Redirect" # for NGINX
# Mount Action Cable outside main process or domain.
# config.action_cable.mount_path = nil
- # config.action_cable.url = 'wss://example.com/cable'
- # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
+ # config.action_cable.url = "wss://example.com/cable"
+ # config.action_cable.allowed_request_origins = [ "http://example.com", /http:\/\/example.*/ ]
+
+ # Assume all access to the app is happening through a SSL-terminating reverse proxy.
+ # Can be used together with config.force_ssl for Strict-Transport-Security and secure cookies.
+ # config.assume_ssl = true
# Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
# config.force_ssl = true
- # Use the lowest log level to ensure availability of diagnostic information
- # when problems arise.
- config.log_level = :debug
+ # Skip http-to-https redirect for the default health check endpoint.
+ # config.ssl_options = { redirect: { exclude: ->(request) { request.path == "/up" } } }
+
+ # Log to STDOUT if configured
+ if ENV["RAILS_LOG_TO_STDOUT"].present?
+ config.logger = ActiveSupport::Logger.new(STDOUT)
+ .tap { |logger| logger.formatter = ::Logger::Formatter.new }
+ .then { |logger| ActiveSupport::TaggedLogging.new(logger) }
+ end
# Prepend all log lines with the following tags.
config.log_tags = [ :request_id ]
+ # "info" includes generic and useful information about system operation, but avoids logging too much
+ # information to avoid inadvertent exposure of personally identifiable information (PII). If you
+ # want to log everything, set the level to "debug".
+ config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info")
+
# Use a different cache store in production.
# config.cache_store = :mem_cache_store
# Use a real queuing backend for Active Job (and separate queues per environment).
- # config.active_job.queue_adapter = :resque
+ # config.active_job.queue_adapter = :resque
# config.active_job.queue_name_prefix = "akkounts_production"
# E-mail settings, adapted from https://github.com/mastodon/mastodon
@@ -106,6 +123,10 @@ Rails.application.configure do
config.action_mailer.delivery_method = ENV.fetch('SMTP_DELIVERY_METHOD', 'smtp').to_sym
+ # Disable caching for Action Mailer templates even if Action Controller
+ # caching is enabled.
+ config.action_mailer.perform_caching = false
+
# Ignore bad email addresses and do not raise email delivery errors.
# Set this to true and configure the email server for immediate delivery to raise delivery errors.
config.action_mailer.raise_delivery_errors = true
@@ -120,43 +141,21 @@ Rails.application.configure do
# the I18n.default_locale when a translation cannot be found).
config.i18n.fallbacks = true
- # Send deprecation notices to registered listeners.
- config.active_support.deprecation = :notify
-
- # Use default logging formatter so that PID and timestamp are not suppressed.
- config.log_formatter = ::Logger::Formatter.new
-
- # Use a different logger for distributed setups.
- # require 'syslog/logger'
- # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
- if ENV["RAILS_LOG_TO_STDOUT"].present?
- logger = ActiveSupport::Logger.new(STDOUT)
- logger.formatter = config.log_formatter
- config.logger = ActiveSupport::TaggedLogging.new(logger)
- end
+ # Don't log any deprecations.
+ config.active_support.report_deprecations = true
# Do not dump schema after migrations.
+
config.active_record.dump_schema_after_migration = false
- # Inserts middleware to perform automatic connection switching.
- # The `database_selector` hash is used to pass options to the DatabaseSelector
- # middleware. The `delay` is used to determine how long to wait after a write
- # to send a subsequent read to the primary.
- #
- # The `database_resolver` class is used by the middleware to determine which
- # database is appropriate to use based on the time delay.
- #
- # The `database_resolver_context` class is used by the middleware to set
- # timestamps for the last write to the primary. The resolver uses the context
- # class timestamps to determine how long to wait before reading from the
- # replica.
- #
- # By default Rails will store a last write timestamp in the session. The
- # DatabaseSelector middleware is designed as such you can define your own
- # strategy for connection switching and pass that into the middleware through
- # these configuration options.
- # config.active_record.database_selector = { delay: 2.seconds }
- # config.active_record.database_resolver = ActiveRecord::Middleware::DatabaseSelector::Resolver
- # config.active_record.database_resolver_context = ActiveRecord::Middleware::DatabaseSelector::Resolver::Session
+ # Only use :id for inspections in production.
+ config.active_record.attributes_for_inspect = [ :id ]
+
+ # Enable DNS rebinding protection and other `Host` header attacks.
+ # config.hosts = [
+ # "example.com", # Allow requests from example.com
+ # /.*\.example\.com/ # Allow requests from subdomains like `www.example.com`
+ # ]
+ # Skip DNS rebinding protection for the default health check endpoint.
+ # config.host_authorization = { exclude: ->(request) { request.path == "/up" } }
end
diff --git a/config/environments/test.rb b/config/environments/test.rb
index 0c474bf..3dd58f2 100644
--- a/config/environments/test.rb
+++ b/config/environments/test.rb
@@ -1,3 +1,5 @@
+require "active_support/core_ext/integer/time"
+
# The test environment is used exclusively to run your application's
# test suite. You never need to work with it otherwise. Remember that
# your test database is "scratch space" for the test suite and is wiped
@@ -6,31 +8,33 @@
Rails.application.configure do
# Settings specified here will take precedence over those in config/application.rb.
- config.cache_classes = false
- config.action_view.cache_template_loading = true
+ # While tests run files are not watched, reloading is not necessary.
+ config.enable_reloading = false
- # Do not eager load code on boot. This avoids loading your whole application
- # just for the purpose of running a single test. If you are using a tool that
- # preloads Rails for running tests, you may have to set it to true.
- config.eager_load = false
+ # Eager loading loads your entire application. When running a single test locally,
+ # this is usually not necessary, and can slow down your test suite. However, it's
+ # recommended that you enable it in continuous integration systems to ensure eager
+ # loading is working properly before deploying your code.
+ config.eager_load = ENV["CI"].present?
# Configure public file server for tests with Cache-Control for performance.
- config.public_file_server.enabled = true
- config.public_file_server.headers = {
- 'Cache-Control' => "public, max-age=#{1.hour.to_i}"
- }
+ config.public_file_server.headers = { "Cache-Control" => "public, max-age=#{1.hour.to_i}" }
# Show full error reports and disable caching.
- config.consider_all_requests_local = true
+ config.consider_all_requests_local = true
config.action_controller.perform_caching = false
config.cache_store = :null_store
- # Raise exceptions instead of rendering exception templates.
- config.action_dispatch.show_exceptions = :none
+ # Render exception templates for rescuable exceptions and raise for other exceptions.
+ config.action_dispatch.show_exceptions = :rescuable
# Disable request forgery protection in test environment.
config.action_controller.allow_forgery_protection = false
+ config.active_job.queue_adapter = :test
+
+ # Disable caching for Action Mailer templates even if Action Controller
+ # caching is enabled.
config.action_mailer.perform_caching = false
# Tell Action Mailer not to deliver emails to the real world.
@@ -38,27 +42,37 @@ Rails.application.configure do
# ActionMailer::Base.deliveries array.
config.action_mailer.delivery_method = :test
- # Print deprecation notices to the stderr.
- config.active_support.deprecation = :stderr
-
- # Raises error for missing translations.
- # config.action_view.raise_on_missing_translations = true
+ config.action_mailer.default_options = {
+ from: "accounts@kosmos.org",
+ message_id: -> { "<#{Mail.random_tag}@kosmos.org>" },
+ }
config.action_mailer.default_url_options = {
host: "accounts.kosmos.org",
protocol: "https"
}
- config.action_mailer.default_options = {
- from: "accounts@kosmos.org",
- message_id: -> { "<#{Mail.random_tag}@kosmos.org>" },
- }
+ # Print deprecation notices to the stderr.
+ config.active_support.deprecation = :stderr
- config.active_job.queue_adapter = :test
+ # Raise exceptions for disallowed deprecations.
+ config.active_support.disallowed_deprecation = :raise
+
+ # Tell Active Support which deprecation messages to disallow.
+ config.active_support.disallowed_deprecation_warnings = []
+
+ # Raises error for missing translations.
+ # config.i18n.raise_on_missing_translations = true
+
+ # Annotate rendered view with file names.
+ # config.action_view.annotate_rendered_view_with_filenames = true
if ENV["S3_ENABLED"] && ENV["S3_ENABLED"].to_s != "false"
config.active_storage.service = :s3
else
config.active_storage.service = :local
end
+
+ # Raise error when a before_action's only/except options reference missing actions.
+ config.action_controller.raise_on_missing_callback_actions = true
end
diff --git a/config/initializers/assets.rb b/config/initializers/assets.rb
index 4b828e8..d929f78 100644
--- a/config/initializers/assets.rb
+++ b/config/initializers/assets.rb
@@ -1,7 +1,7 @@
# Be sure to restart your server when you modify this file.
# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
+Rails.application.config.assets.version = "1.0"
# Add additional assets to the asset load path.
# Rails.application.config.assets.paths << Emoji.images_path
@@ -11,4 +11,4 @@ Rails.application.config.assets.paths << Rails.root.join('node_modules')
# Precompile additional assets.
# application.js, application.css, and all non-JS/CSS in the app/assets
# folder are already added.
-# Rails.application.config.assets.precompile += %w( admin.js admin.css )
+# Rails.application.config.assets.precompile += %w[ admin.js admin.css ]
diff --git a/config/initializers/content_security_policy.rb b/config/initializers/content_security_policy.rb
index 35d0f26..b3076b3 100644
--- a/config/initializers/content_security_policy.rb
+++ b/config/initializers/content_security_policy.rb
@@ -1,30 +1,25 @@
# Be sure to restart your server when you modify this file.
-# Define an application-wide content security policy
-# For further information see the following documentation
-# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy
+# Define an application-wide content security policy.
+# See the Securing Rails Applications Guide for more information:
+# https://guides.rubyonrails.org/security.html#content-security-policy-header
-# Rails.application.config.content_security_policy do |policy|
-# policy.default_src :self, :https
-# policy.font_src :self, :https, :data
-# policy.img_src :self, :https, :data
-# policy.object_src :none
-# policy.script_src :self, :https
-# policy.style_src :self, :https
-# # If you are using webpack-dev-server then specify webpack-dev-server host
-# policy.connect_src :self, :https, "http://localhost:3035", "ws://localhost:3035" if Rails.env.development?
-
-# # Specify URI for violation reports
-# # policy.report_uri "/csp-violation-report-endpoint"
+# Rails.application.configure do
+# config.content_security_policy do |policy|
+# policy.default_src :self, :https
+# policy.font_src :self, :https, :data
+# policy.img_src :self, :https, :data
+# policy.object_src :none
+# policy.script_src :self, :https
+# policy.style_src :self, :https
+# # Specify URI for violation reports
+# # policy.report_uri "/csp-violation-report-endpoint"
+# end
+#
+# # Generate session nonces for permitted importmap, inline scripts, and inline styles.
+# config.content_security_policy_nonce_generator = ->(request) { request.session.id.to_s }
+# config.content_security_policy_nonce_directives = %w(script-src style-src)
+#
+# # Report violations without enforcing the policy.
+# # config.content_security_policy_report_only = true
# end
-
-# If you are using UJS then enable automatic nonce generation
-# Rails.application.config.content_security_policy_nonce_generator = -> request { SecureRandom.base64(16) }
-
-# Set the nonce only to specific directives
-# Rails.application.config.content_security_policy_nonce_directives = %w(script-src)
-
-# Report CSP violations to a specified URI
-# For further information see the following documentation:
-# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy-Report-Only
-# Rails.application.config.content_security_policy_report_only = true
diff --git a/config/initializers/filter_parameter_logging.rb b/config/initializers/filter_parameter_logging.rb
index 4a994e1..30586ed 100644
--- a/config/initializers/filter_parameter_logging.rb
+++ b/config/initializers/filter_parameter_logging.rb
@@ -1,4 +1,8 @@
# Be sure to restart your server when you modify this file.
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
+# Use this to limit dissemination of sensitive information.
+# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
+Rails.application.config.filter_parameters += [
+ :password, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+]
diff --git a/config/initializers/inflections.rb b/config/initializers/inflections.rb
index ac033bf..3860f65 100644
--- a/config/initializers/inflections.rb
+++ b/config/initializers/inflections.rb
@@ -4,13 +4,13 @@
# are locale specific, and you may define rules for as many different
# locales as you wish. All of these examples are active by default:
# ActiveSupport::Inflector.inflections(:en) do |inflect|
-# inflect.plural /^(ox)$/i, '\1en'
-# inflect.singular /^(ox)en/i, '\1'
-# inflect.irregular 'person', 'people'
+# inflect.plural /^(ox)$/i, "\\1en"
+# inflect.singular /^(ox)en/i, "\\1"
+# inflect.irregular "person", "people"
# inflect.uncountable %w( fish sheep )
# end
# These inflection rules are supported but not enabled by default:
# ActiveSupport::Inflector.inflections(:en) do |inflect|
-# inflect.acronym 'RESTful'
+# inflect.acronym "RESTful"
# end
diff --git a/config/initializers/mailer_host.rb b/config/initializers/mailer_host.rb
deleted file mode 100644
index 4c99e1c..0000000
--- a/config/initializers/mailer_host.rb
+++ /dev/null
@@ -1 +0,0 @@
-Rails.application.routes.default_url_options[:host] = ENV['APP_DOMAIN']
diff --git a/config/initializers/permissions_policy.rb b/config/initializers/permissions_policy.rb
new file mode 100644
index 0000000..7db3b95
--- /dev/null
+++ b/config/initializers/permissions_policy.rb
@@ -0,0 +1,13 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide HTTP permissions policy. For further
+# information see: https://developers.google.com/web/updates/2018/06/feature-policy
+
+# Rails.application.config.permissions_policy do |policy|
+# policy.camera :none
+# policy.gyroscope :none
+# policy.microphone :none
+# policy.usb :none
+# policy.fullscreen :self
+# policy.payment :self, "https://secure.example.com"
+# end
diff --git a/config/puma.rb b/config/puma.rb
index 5ed4437..c076e28 100644
--- a/config/puma.rb
+++ b/config/puma.rb
@@ -1,38 +1,35 @@
-# Puma can serve each request in a thread from an internal thread pool.
-# The `threads` method setting takes two numbers: a minimum and maximum.
-# Any libraries that use thread pools should be configured to match
-# the maximum value specified for Puma. Default is set to 5 threads for minimum
-# and maximum; this matches the default thread size of Active Record.
+# This configuration file will be evaluated by Puma. The top-level methods that
+# are invoked here are part of Puma's configuration DSL. For more information
+# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
+
+# Puma starts a configurable number of processes (workers) and each process
+# serves each request in a thread from an internal thread pool.
#
-max_threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
-min_threads_count = ENV.fetch("RAILS_MIN_THREADS") { max_threads_count }
+# The ideal number of threads per worker depends both on how much time the
+# application spends waiting for IO operations and on how much you wish to
+# to prioritize throughput over latency.
+#
+# As a rule of thumb, increasing the number of threads will increase how much
+# traffic a given process can handle (throughput), but due to CRuby's
+# Global VM Lock (GVL) it has diminishing returns and will degrade the
+# response time (latency) of the application.
+#
+# The default is set to 3 threads as it's deemed a decent compromise between
+# throughput and latency for the average Rails application.
+#
+# Any libraries that use a connection pool or another resource pool should
+# be configured to provide at least as many connections as the number of
+# threads. This includes Active Record's `pool` parameter in `database.yml`.
+max_threads_count = ENV.fetch("RAILS_MAX_THREADS", 5)
+min_threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
threads min_threads_count, max_threads_count
-# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
-#
-port ENV.fetch("PORT") { 3000 }
-
-# Specifies the `environment` that Puma will run in.
-#
+port ENV.fetch("PORT", 3000)
environment ENV.fetch("RAILS_ENV") { "development" }
-# Specifies the `pidfile` that Puma will use.
-pidfile ENV.fetch("PIDFILE") { "tmp/pids/server.pid" }
-
-# Specifies the number of `workers` to boot in clustered mode.
-# Workers are forked web server processes. If using threads and workers together
-# the concurrency of the application would be max `threads` * `workers`.
-# Workers do not work on JRuby or Windows (both of which do not support
-# processes).
-#
-# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
-
-# Use the `preload_app!` method when specifying a `workers` number.
-# This directive tells Puma to first boot the application and load code
-# before forking the application. This takes advantage of Copy On Write
-# process behavior so workers use less memory.
-#
-# preload_app!
-
-# Allow puma to be restarted by `rails restart` command.
+# Allow puma to be restarted by `bin/rails restart` command.
plugin :tmp_restart
+
+# Specify the PID file. Defaults to tmp/pids/server.pid in development.
+# In other environments, only set the PID file if requested.
+pidfile ENV["PIDFILE"] if ENV["PIDFILE"]
diff --git a/lib/tasks/ctags.rake b/lib/tasks/ctags.rake
new file mode 100644
index 0000000..908fcc8
--- /dev/null
+++ b/lib/tasks/ctags.rake
@@ -0,0 +1,29 @@
+module Kosmos
+ class Ctags
+ def self.generate_app_tags
+ excludes = %w[.git gitno log tmp public].join(" --exclude ")
+ cmd = "ctags -R --languages=ruby --exclude #{excludes} ."
+ system cmd
+ end
+
+ def self.generate_bundler_tags
+ runtime = ::Bundler::Runtime.new Dir.pwd, ::Bundler.definition
+ paths = runtime.specs.map(&:full_gem_path)
+ generate_tags(paths, "gems.tags")
+ end
+
+ def self.generate_tags(paths, tag_file)
+ paths = paths.join(' ').strip
+ cmd = "find #{paths} -ignore_readdir_race -type f -name '*.rb' 2>/dev/null | ctags -f #{tag_file} -L -"
+ system cmd
+ end
+ end
+end
+
+namespace :ctags do
+ desc 'generate ctags'
+ task :create do
+ Kosmos::Ctags.generate_app_tags
+ Kosmos::Ctags.generate_bundler_tags
+ end
+end